Your cart is empty.
Your cart is empty.Use the Dometic 385314349 Water Valve Assembly with the following Dometic / Sealand toilet models: 506+, 510+, 511 H, 547+, 548+, 706, 709, 748, 749, 806, 808, 847, 848, 1147, 1148, 2010, 2011, 5006, 5047, 5048, 5049, EcoVac 146-149, VacuFlush 168, VacuFlush 606, VacuFlush 647, VacuFlush 648, VacuFlush 1006, VacuFlush 1008, VacuFlush 1047, VacuFlush 1048, VacuFlush 1049, VacuFlush 1106, VacuFlush 5146, VacuFlush 5147, VacuFlush 5148, VacuFlush 5149.
Robert Barnes
Reviewed in the United States on January 11, 2025
This flush valve by dometic was a perfect fit on the motorhome
Linda L Wright
Reviewed in the United States on September 16, 2024
Works well good price
Cope
Reviewed in the United States on July 28, 2024
This is an exact fit for my Sealand (Dometic) 510 toilet. It was about a 10 minute install. The screws that came with it have a different thread pitch than my existing screws, so I didn't use them. The valve works great.
MB
Reviewed in Germany on June 26, 2024
Das perfekte Ersatzteil für unsere Toilette auf dem Boot. Vor einem Jahr montiert (sehr einfach) und bislang funktioniert es perfekt.Ich würde es in jedem Fall erneut kaufen.Der Versand war schneller als angegeben.
Chad
Reviewed in the United States on May 27, 2024
My camper toilet valve was leaking, ordered this part. It was easy to replace and fixed the problem. I would highly recommend!
Viperwife
Reviewed in the United States on April 9, 2024
Good factory Dometic part, fits and works like a charm to repair small drip from toilet flush valve.EZ install, about 30 mins total. Would buy again.
TJnBC
Reviewed in Canada on April 3, 2023
Easy install. Fit perfectly. Took me less than 15min to swap. No more leaks
Michael Keen
Reviewed in Australia on September 12, 2022
Broke after 2 flushes, buy the genuine one!!
SCB
Reviewed in the United States on March 23, 2022
I bought this for our 2012 Newmar Bay Star which we have owned since 2018. Sure enough, on our first trip of the year, we start getting water around the base of the toilet. At first, I thought it was going to be time for a new toilet, but some online research taught me that this valve assembly is quite often the culprit. I also read that this valve can be difficult to winterize, and if not fully winterize winterized, it will freeze and then leak. Apparently, you want to flush the toilet several times while you are in the process of pumping antifreeze through your water system.Installation is anywhere from very easy to difficult depending on working area around the toilet and water lines. There are two water lines attached to the valve assembly. The lower one has a screw on adapter, and the pex line was secured with a stainless steel screwdriver clamp. The upper water tube is pushed onto the valve's fitting and secured with another clamp. But, you have to look at what clamps are used on your set-up and be prepared. I thought I was going to have to use pex stainless steel clamps and bought a kit with the needed tool and clamps. But...when the floor pedal was removed, I could then see that screwdriver clamps were used.Consider attaching the water lines to the valve assembly first if your working space is limited. The valve assembly is attached with two screws. Alternate between the two as you tighten them and don't over tighten them.The valve assembly is somewhat pricey for what it is, but I would rather pay for a Dometic valve rather than taking a chance with a different brand, even though the joke may be on me because they may come off the same assembly line in China! And, my three star rating for "easy to install" is due to small work area around our toilet. I had to use stubby screwdrivers and install the lower water line to the valve assembly before screwing it in place.
Norma. Crawley
Reviewed in Canada on March 17, 2022
I have a 500 series toilet and after the winter, the old valve was leaking. Replaced it and everything now fine. Received item same day I ordered. Thank you
FormosaTiger
Reviewed in the United States on June 22, 2018
This worked just right on my Dometic 510 toilet. The improved brass shaft should hold up quite well. I lubricated the o-rings on the shaft with silicon grease so they would slide in without getting nicked and to help them seal better. After I installed the ball I sprayed it and the entire waste tube down with silicon spray. I also applied the silicon spray to the ball seals on all sides to keep everything lubed well. She now holds water like a champ and doesn't leak. This was part of a complete rebuild where I replaced the vacuum breaker, the water valve assy and upgraded the sprayer with a much improved hose. I also had to repair a water damaged floor which I built up under the toilet to elevate it 16 1/2" high, a big improvement.Parts used:- Dometic 385230335 Vacuum Breaker Hand Spray Kit - this was the wrong one for the 510, the pipe going into the back of the toilet was too short. I used about 1.5" 5/8 inside diameter clear nylon tubing to slip over the plastic pipe and added about 2" of 1/2" CPVC and a couple of hose clamps to secure it all together and now it works like it was meant to. By the way the plastic pipe going to the toilet is not a standard size of CPVC, PEX, or PVC so none of those couplings would have worked. Item that I should have used is the Dometic 385230325 Vacuum Breaker Hand Spray Kit with Extension, but my extension works so I'm leaving it at that for now.- Dometic SE341549 385310063 Floor Flange Seal which I lubricated all over with dish soap like the instructions advised.- Dometic 385316140 Rubber Seal Kit for Toilet - Black/Gray- SmarterFresh Rounded Bidet Sprayer Head Only, Stainless Steel Brushed Nickel Diaper Sprayer Bidet Head with a length of Stainless Steel Handheld Shower Hose that I had left over from other projects This spray head doesn't leak and looks a lot better, it will not fit in the spray head retainer from Dometic- Sanilo Elongated Toilet Seat, Wide Choice of Slow Close Toilet Seats, Molded Wood, Strong Hinges (Sea Breeze)- Luxe Bidet Neo 320 - Self Cleaning Dual Nozzle - Hot and Cold Water Non-Electric Mechanical Bidet Toilet Attachment (blue and white). I added a hot water line into my water closet for the bidet. While not expensive this bidet is great and saves putting a lot of toilet paper into the tank.So now my 22 year old toilet works like new again, the toilet is elevated, which makes it more comfortable for me, I now have a bidet, and it all looks great.
James Suitt
Reviewed in the United States on June 9, 2017
The valve works well. The delivery time was faster than predicted and the price was fair. The only problem encountered was one of the supplied new mounting screws was broken in half and could not be used to mount the valve. I was forced to use one of the original mounting screws to complete the installation. The installation instructions stated in bold letters to discard the original screws and use the provided new screws. However, I needed to install the valve at that time in order to leave for a planned trip with my camper. So far all is working well an there are no leaks.
Customer
Reviewed in Canada on June 20, 2017
Great for the application
Recommended Products
