Your cart is empty.
Your cart is empty.Product Description
DIN Rail Terminal Blocks - Dinkle Assembly Kit DK10N Red/Black 10 Gang with Jumpers DIN Rail Terminal Blocks, 6-20 AWG, 60 Amp, 600 Volt
This assembly kit includes 5 DK10N-BK Dinkle terminal blocks, 5 DK10N-RD Dinkle terminal blocks, 2 SS2 end brackets, and 1 DK10NC-BK end cover, 8 DSS10N-02P jumpers, all mounted on a 7" piece of aluminum RoHS rail. These are 10 separate circuits but you can use the jumpers to make them in common. Fully customizable! Technical Data (UL) Rated Voltage: 600V Rate Current: 60A Conductor Cross-section, Solid (AWG): 20-6 Conductor Cross-section, Flexible (AWG): 20-6 Rated Impulse Withstand Voltage: 8KV Torque (N-m): 1.3 Screw: M4 Wire Strip Length: 12-14mm Insulating Material: PA TxHxW (mm): 10 x 49.3 x 42.9 (Individual Blocks) DIN Rail (mm): 35, 32 Jumper/Bridge: Press-fit/Insertion. Accepts TM49W marking tags.
Red & Black Dinkle DIN Rail Blocks
Aluminum DIN Rail
Jumpers
DIN Rail Terminal Block End Bracket
Danielgold
Reviewed in Canada on January 16, 2025
EXELLENTE
David
Reviewed in the United States on September 24, 2024
I needed some terminals for a solar system that used 10AWG wire. These blocks with the jumpers were exactly what I needed. I would have liked a couple extra end covers because I didn't use the rail assembly as a complete unit, but that is ok.
Rick Nieland
Reviewed in the United States on March 15, 2024
Nicely made product
R Grenier
Reviewed in Canada on February 4, 2024
Excellent pour un travail propre et efficace...Client satisfait...
Clayton Y.
Reviewed in Canada on December 28, 2024
Kit came stamped with all the correct approval ratings, and they are well made.
Chris
Reviewed in the United States on November 3, 2024
These worked perfect, was pleased they shipped with the din rail also
Jim Wings
Reviewed in the United States on November 25, 2024
These worked great for some stage dimmers that I had to rewire. The 60 amp rating is what I needed, and the jumpers really made the wiring easy.
TimH
Reviewed in the United States on August 24, 2023
If you need to interconnect many heavy wires like 6-10AWG at 40-60A, normal connectors get really expensive and bulky fast, as the number of interconnects increase.This well thought out interconnect is extremely compact and the shorting links for many common applications (like 4 wire mains interconnects /distribution) effectively greatly increase the number of possible interconnects without requiring any added wires and tedious tightening of screws.My only reservation is the rating of 60A seems high for the thickness of metal in the shorting links.This is DIN rail so each section interconnect can actually be easily removed and placed on another DIN rail if you are just wanting to use a few interconnects. The limitation is you lose the end rails that insulate adjacent connectors. You would have to place them next to another DIN rail insulated device on the DIN rails or try to find and buy some screw down end rails. The end rail pieces are interesting in that they have two screws the tip of one goes into the metal of the rail and prevents it sliding sideways while the other prevents the normal uncliping rocking action which is normally common to most DIN rail devices.
Customer
Reviewed in the United States on October 29, 2023
The terminal blocks are made well and met my need. Shipment was fast. My only dislike is the jumpers do not stay tightly seated. It would be better if the jumpers screw down into the blocks so they could not come out. I would buy these again but I would not use the jumpers.
Pierre-Eric Ahier
Reviewed in Canada on April 19, 2022
Bon
Tandemguy
Reviewed in the United States on August 21, 2020
I was searching for a good, flexible solution to connect portable solar panels to my existing roof mounted solar system on my travel trailer. When we boondock in a shady spot, I wanted to be able to place my DIY 200 watt solar suitcase in the sun to recharge batteries and not have to run a generator. This DIN rail terminal block is well conceived and well built to easily connect to my existing system in the storage compartment of my trailer where the solar charge controller is already set up. Quick shipping. Also, urls provided to see online tutorials, get support or ask questions if needed. Great product and superior purchase experience.
Robert Sacamato
Reviewed in the United States on September 9, 2019
I don't do many product reviews but when the seller, Clayton, sent me a handwritten note thanking me for my purchase, I felt it was the least I could do. As, if not more, importantly, this is an excellent product and exactly what I needed for my DIY solar project. In fact, it's so great, I bought a second kit. I needed a way to combine multiple solar inputs into a single output to my MPPT and didn't want to use (or make) a relatively large combiner box. This kit is highly customizable, super easy to install and works like a charm. When I expanded my system to include a second MPPT, I knew the Dinkle Assembly Kit (DK10N) was the way to go. Highly recommend! Thanks Clayton!!
Recommended Products