Your cart is empty.
Your cart is empty.Product Description
Humidification mode
Set start humidity < stop humidity. KT3300 will work in humidification mode. Output connected to humidifier.
For example, if start humidity = 50 and stop humidity = 60, the humidifier will activate when measured humidity < 50 and deactivate when measured humidity ≥ 60. The humidifier will activate again when measured humidity drops below 50.
Dehumidification mode
Set start humidity > stop humidity. KT3300 will work in dehumidification mode. Output connected to dehumidifier.
For example, if start humidity = 60 and stop humidity = 50 , the dehumidifier will activate when measured humidity > 60 and deactivate when measured humidity ≤ 50. The dehumidifier will activate again when measured humidity rises above 60.
Countdown OFF/ON mode
Countdown accuracy: <10min
Maximum countdown time: 99hours 59minutes
1. Turn off the humidity control when the countdown is complete.
2. Turn on the humidity control when the countdown is complete.
Humidity Sensor
Humidity Control Range : 20~95%RH
Control accuracy: ±5%RH
Sensor Length: 135mm
Full view 360° LCD display
See a variety of key data at a glance
Memory function
After a power outage, KT3300 setup parameters will be saved automatically. In M2 or M3 mode, the timer will restart with the preset countdown when power is restored.
Humidity Calibration
1. Press and hold M for 3s, the screen will display 0%RH and flash.
2. Press + or - to adjust the value in the range -10-10%RH
3. Press and hold M to save and exit.
It is widely used in intelligent control applications, such as refrigeration, brewing, reptile, aquacultures, greenhouses and households.
$99.00
$ 47 .99 $47.99
$175.00
$ 72 .99 $72.99