Your cart is empty.
Your cart is empty.Eze-Kote is a water-based, low odor, water-based epoxy resin. Brush over balsa and lightweight glass cloth to create a tough, durable and fuel resistant film that can be sanded easily and painted after 20-30 minutes.
jean louis GUILLOT
Reviewed in France on September 24, 2024
Bien reçu le produit dans le temps promisAu top
karinette
Reviewed in France on June 10, 2024
Rien à rajouter sur la livraison, j'utilise cette EZE-ELCOTE depuis 2ans rien à rajouter. Très bon produit je recommande
NickR
Reviewed in the United Kingdom on February 20, 2024
Was used to cover the hull of a model boat I am building with lightweight glass fibre instead of using the traditional resin/hardener. It is far less messy and cleans up using just cold water but dries waterproof and relatively hard - but not as hard as traditional resin/hardener. A 500ml bottle goes quite a long way and finally, it is virtually odour free so you do not stink the place out using it.I would definitely recommend this product and will use it again!
Trev
Reviewed in the United Kingdom on April 11, 2022
First time using this item and very impressed with the finish.
Edward Figueroa
Reviewed in the United States on December 6, 2019
DELUXE MATERIALS Eze-Kote Finishing Resin is very good!I'm using it on a project!After a few coats the wood is ready to paint over!
mark shockley
Reviewed in the United States on November 13, 2019
Like
George Nichols
Reviewed in the United States on January 10, 2018
Great product performs as good as expected from this manufacture
iMike Kregear
Reviewed in the United States on May 16, 2017
Wow. No more excuses to not glass cover my airplanes. Using this stuff is easier than monokote or tissue and dope and looks better as well. Certainly easier than epoxy resin or polyester resin. Not sticky gooey or smelly. Cleans with water and dries fast. This stuff has vastly exceeded my hopes
John A.
Reviewed in the United States on February 8, 2017
Nothing at all like real epoxy finishing resin. Its water base polyurethane, what you can buy at any paint or hardware store. I have used it ever since it was invented back in the 80s. It dose work but takes many more coats than epoxy, and dose not have the strength of epoxy. Air dries like typical latex paint and sands easy. If you are just trying to prep a surface for paint its fine, but if laying glass cloth or any fiber cloth for maximum strength, use epoxy.
Thomas Fisher
Reviewed in the United States on October 24, 2016
This stuff is awesome, much better than the other brand finishing resin
fn-pauly
Reviewed in the United States on January 11, 2015
I use this to paint_prep flat-foam RC airplanes. Brush it on, sand lightly and final coat, all very lightly. Then top-coat with your favorite paint and fly!!
Wade
Reviewed in the United States on September 10, 2013
I am an advanced RC airplane pilot and builder. One of my flying buddies (The Old Guy) recommended this to me. He said "you know how after you have a plane for awhile, and it starts looking dirty from handling it?" "Eze-Kote stops the oil and dirt from your fingers from getting into the foam". "You can clean it off, if you coat your plane before it gets dirty". He also said that it added a lot of strength, with very little added weight. Boy! Was he ever right! It also makes those chalky looking paint jobs on manufactured planes look like top quality, and it is WAY lighter weight than paint! It is ridiculously easy to apply, it's ready to fly in 20mins. or less, it goes on smooth as glass, and it doesn't wad up under your brush if you go over a spot that is partially cured. It just goes smoothly right over it. I can say that I've used it on several different models with GREAT results on all. It even works on that "waxy" feeling EPO foam. It will bead up for the first few brush strokes, but just keep going and it will take to the surface and give an excellent finish! Applying fiberglass cloth on foam or plastic has never been this easy! Cut your cloth, lay down a coat, and immediately apply your cloth, then brush more Eze-Kote through the cloth right away for a quick, smooth, clean layout. No mixing, quick curing, water clean-up, works great on all types of foam, and many plastics. The possibilities seem endless!!! This incredible product can be used for many different uses outside of what it is marketed for! Oh yeah! Once it is cured, it is impervious to water! I have airplanes that have had some rough landings that would not have survived near as well if they had not been coated with this. One more point, I have an EDF Jet that I belly land on the grass. I coated it, and NO MORE scratched up belly!!! You can't find a better product than this! My flying group has seen the proof, and all of them are sold on it.
Recommended Products
$27.98
$ 13 .99 $13.99