Your cart is empty.
Your cart is empty.CRC Dry PTFE Lubricant works thoroughly to reduce friction and wear in different machine parts, pulleys, hinges, coin mechanisms, drawers, rollers, control buttons, catches, chutes, and slides. This lubricant is highly resistant to dirt, dust, and oil build-ups. Our formula penetrates and bonds to most surfaces to maximize performance and durability, and is effective in temperatures ranging from -40 to 450 degrees F
Michael Thomas
Reviewed in the United States on January 26, 2025
Works pretty good on my truck's hitch receiver although I had to reapply it after a couple of months
G. H. Goodwin
Reviewed in the United States on August 28, 2024
This was recommended by the manufacturers local service company. We had a double hung window replaced and they recommended this as a lubrication for the others. DARN - but it worked well. No visible film or residue. Easy to use. My partner is very pleased.
Chris
Reviewed in the United States on August 1, 2024
Perfect product for lubricating my after market UCA's and upper ball joint. Product sprays evenly, goes on fine and works.
NobullDawg
Reviewed in the United States on March 25, 2024
product is fine but did not come with a red spray tube for direct use. not missing the nozzle just did not have a fitting but i did and all is good
alm
Reviewed in the United States on December 27, 2024
Perfect for what I needed
Former WOODRUSH sailor
Reviewed in the United States on August 18, 2023
This lubricant, when dry, is in fact completely dry! It does go on wet and the nozzle will not accept a spray tube.This reviewer first used it on the drive chains on a Billy Goat lawn vac. The chains do not run fast and they do not transmit a lot of power. They do, when lubricated wet, collect a mess of abrasive debris as a result of the use to which they are being put. Does that abrasive debris cause excess chain wear?? Probably so!This lubricant has also functioned well as a rust preventive on those chains.If you buy this lubricant you will soon find many other uses in situations needing a clean, dry lubricant.Good stuff!
Will
Reviewed in the United States on July 8, 2023
I have used this CRC lube for years and it is good stuff. This last order however, the quality control was very poor. The can arrived un-wrapped, loose and bouncing around in a larger than needed cardboard box. Plus, the can in the box should never have been shipped to me. The label on the can was only partially attached and part of that label was missing. Also, the little straw that always comes with the can was not there. Sloppy shipping and quality control. Fortunately, I don't need the label intact and I have a straw from a previous can that I can use. But still disappointing.
FJ Owner
Reviewed in the United Arab Emirates on June 26, 2023
Helps keep my auro motive parts lubricates with out the dust build up. If you offroad this is a great product to maintain the lie og your cars ball joints
Jasper P.
Reviewed in the United States on November 6, 2023
This product is recommended on many videos about troubleshooting 3D resin printing. After my 5th or 6th print, my prints started failing due to the print sticking to the FEP. About 50-75% into the print job, the print would stick to the FEP sheet and separate from the supports. I would wind up with a raft with supports stuck to the base and a blob of messed up print on the FEP sheet.Used this after cleaning the vat and sheet and restarted my print job. Worked perfectly! So far, I have only applied it once and have successfully printed maybe 8 to 10 further print jobs. Not sure how often I will need to use it. BTW, I had approximately 5 months between my most recent print and the one prior, and the residual PTFE remained effective.
obaid
Reviewed in the United Arab Emirates on December 7, 2022
Good product for my rv
Recommended Products
