Your cart is empty.
Your cart is empty.
【New and high quality】
【What you get: 1 x Rivet adapter 2 x Wrench】
【Attention】:
✮ The power tool is NOT included.
✮ The rivet does NOT apply to the drill with impact function.
✮ 0.39in = 1cm = 10mm, 1in = 2.54cm = 25.4mm.
✮ 1%-3% size difference is allowed cause measured by hand.
✮ Due to the different monitors, the picture may not reflect the actual color of the item.
【Usage (pick the right size opening for your rivet, there are 4 to choose from )】:
ღ Attach the tool to cordless drill.
ღ Hold the tool, before it starts to grab the rivet, hit reverse on your drill until you feel click. The rivet can be fitted in once the teeth widen. Put the rivet in the tool and slowly hold the handy part of the tool and pull the drill trigger, when you feel it start to grab the rivet.
ღ Put it in the hole that you wish to rivet and keep holding the handy part and hit the drill at full.
ღ Once the rivet pops, keep holding the handy part of the tool and hit reverse on your drill.
ღ The teeth will widen and the old rivet shaft will drop to the ground. Put your drill back in the forward position and rinse and repeat.
【Details】:
♥ Function: riveting
♥ Material: plastic + metal
♥ Big wrench: 5.32in/13.5cm
♥ Small wrench: 3.94in/10cm
♥ Working with power drill: ≥1.5N.m
♥ Riveting tool: 6.30 x 2.28in/16 x 5.8cm
♥ Nozzle size: 0.09in, 0.13in, 0.16in, 1.89in/2.4mm, 3.2mm, 4.0mm, 4.8mm
Tiger Lily
Reviewed in the United Kingdom on February 5, 2025
Dose well hubby said its a great wee tool
dean platt
Reviewed in the United Kingdom on February 13, 2025
Don't bother, ok for thin rivets but even though you can use larger rivets it is almost impossible to stop the device from spinning.
Eduardo Miranda H
Reviewed in the United States on February 12, 2025
Perfec
Krazyer
Reviewed in the United States on August 25, 2024
Did not get one rivet in! Chucked into my cordless drill, had high hopes just to have them kicked in the groin. Some instructions might have helped but doubt it. That’s for a junk product!! If I could give you zero stars, I would.
Alice M. Prock
Reviewed in the United States on August 22, 2024
I was very impressed with the Rivet Gun. It worked very well and the job was done quickly.
Katelyn Driggers
Reviewed in the United States on July 6, 2024
It does the job well, hopefully it lasts occasional use!
GB Dutch
Reviewed in the United States on July 26, 2024
It worked as advertised. Clockwise to tighten the rivet, counter clock-wise to expel rivet stem. Some people have reported the rivet end being stuck. I had that issue in the beginning, after which I cleaned it with alcohol as someone else did. Then it worked for a while. But it got stuck again. Then I used WD40, no issues since. I am using the largest head btw and aluminum rivets.
Rob D.
Reviewed in the United Kingdom on June 19, 2024
Looking for a cheap drill attachment for pop/blind rivets for occasional use? This will do the job.I’ve used this extensively on an outdoor home project with 3.4 and 4.0mm stainless steel rivets on a small Bosch battery drill and it basically works. You can’t use this to get in to tight spots - need a lot of clearance when connected to the drill, and you need both hands for the heavier rivets.I would highly recommend two things - first, take it apart/practice and familiarise yourself with how it works to pull and release the rivets - you don’t want to spin too far in the wrong direction. Second, and most important, don’t whack the drill up to high speed. If you overrun the pull range then the drill will be working against the structure of the attachment. It is reasonably robust, but it is inside a plastic casing. Get heavy handed with high speed and go to the end of the range for either pull or release and you will crack something.I would spend more if using this on a regular, frequent basis. But otherwise, taking care with what was essentially a very cheap, basic attachment, this item gets the job done and done well (enough).
Allan
Reviewed in the United Kingdom on February 15, 2024
Cheap but brilliant. It's cheaper than a manual riveter, so, if you already have a drill then this attachment is an amazing option.
John j.
Reviewed in the United States on November 4, 2024
Buen producto
Ed
Reviewed in the United States on November 18, 2024
I recommend this revit gun adapter tools for being easy to use for the meantime caused im using for few time in a moment and hopely it will run nice to me for my next home project.
Pete Newton
Reviewed in the United Kingdom on October 21, 2024
Fitted to my drill tried the smallest rivet I have would not work, rivet moved a couple of mm then nothing, no way to adjust
hal e mccord
Reviewed in the United States on October 17, 2023
Seems like a really good idea, but the unit I received will not release the used rivet pin without a complete breakdown of the collett assembly, making the product useless in real world scenarios... either a manufacturing or quality assurance fail for my particular unit, I suspect.
Recommended Products
$190.00
$ 88 .99 $88.99
$16.79
$ 6 .99 $6.99
$94.75
$ 43 .99 $43.99