Your cart is empty.
Your cart is empty. Applications
The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Diameter of Anchor
The diameter of the anchor is 3/8".
Length Anchor
The length of the anchor is 4"
Minimum Embedment
The minimum anchor embedment into the concrete is 1-1/4". Therefore, the anchor must be installed so that a minimum of 1-1/4" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 1-1/4" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/8" diameter anchor requires the hole in the fixture to be 1/2".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete.
Carlos
Reviewed in the United States on September 6, 2023
I ordered these to hang up my 75" on a full motion mount that extends out. These arrived as described and on time. My wall is made out of CBS and these anchors worked great. I'm pleased with them and recommend them.
Robert L. Armstrong
Reviewed in the United States on September 30, 2023
Just what I needed and fast shipping
Sam
Reviewed in the United States on March 19, 2023
I want my money back or you’re looking for a law suit. I’ll give you 30 days. Very cheap quality as well.Don’t waste your money.
ian Connoisseur
Reviewed in the United States on January 5, 2023
Skip these. They are different from the picture. Meaning instead of one solid collar, its 2. when you hammer in the anchor it splits at that intersection. Frustrating to say the least. Skip these.2 stars as a couple of them actually worked but most did not.
Tom Jones
Reviewed in the United States on August 19, 2022
Worked perfectly to keep a 2X4 in place along a concrete walkway.
zack n.
Reviewed in the United States on January 26, 2022
Great overall product just the box wasn’t taped well so lost several washers and nuts.
Franco
Reviewed in the United States on July 16, 2021
I used these to fasten a gate opener to a cinder block wall. Anchored the mechanism solidly and perfectly! A+++
Recommended Products
$25.19
$ 12 .99 $12.99
$64.05
$ 25 .99 $25.99
$37.32
$ 18 .99 $18.99