Your cart is empty.
Your cart is empty.Safe, secure transportation of motorcycles is Condor's business, and we make the finest wheel chocks for every motorcycle and scooter. Make your life easier with the Pit- Stop/Trailer-Stop. It's our best selling and most versatile wheel chock, which can be used every day. Just place it in your garage, and ride your bike right into it - no kickstand required, because our chocks hold your bike so securely. Now the bike takes up less room in your garage because it sits upright, and you can check the fluids, service it, or use it outside to wash and detail your ride.
Michael Cardinal
Reviewed in the United States on February 27, 2025
I have two of these, one bolted in an enclosed trailer, another just sits on the garage floor (doesn’t move at all).I use these for my Harley Ultra Limited, saves room in the garage with the bike upright.Very stable.
Kenneth
Reviewed in the United States on January 23, 2025
Very well made. Fits a 2019 Road King and keeps it upright. It is a little hard to roll it in but that's due to the weight of the bike.
A. Causey
Reviewed in the United States on September 7, 2024
Not cheap but the Condor Pit-Stop is very well made and constructed. I have a V-Star 1300 Deluxe that weighs over 700 lbs and this wheel chock holds my motorcycle very securely. It does take a bit of effort to both roll the motorcycle onto and off of the wheel chock but I can do it solo with little difficulty. For reference I am nearly 70 years old and weigh less than 160 lbs. I do the roll on/roll off while seated astride the motorcycle as I feel much more in control than when standing beside the motorcycle. The stand allows me to check my oil and coolant levels plus it also lets me store my motorcycle parked straight up in my garage which gains some room. If your motorcycle does not have a center stand (like mine) the Condor Pit-Stop is a high quality solution that works very well. Highly recommend!
r2
Reviewed in the United States on September 4, 2024
My Indian rolled into the Pit-Stop with ease. It was like it was made just for my model!I followed the instructions for the minimal assembly involved as it comes mostly ready to go right out of the box. Just 2 screws (included) to attach to the cross-member for full stability!I cross-referenced my front tire specs with the enclosed documentation that easily allows you to find the proper setting(s) for your model. I got lucky with the first recommended setting as the best one to provide the proper support for the bike.It was easy to roll up onto the cradle once you have the bike aligned properly. It does take a little effort to roll the bike back out of the cradle, but that just proves the Condor works as designed.I was able to change the oil and filter with ease after getting the bike in the Pit-Stop. This is truly a game changer when it comes to being able to work on your motorcycle WITHOUT a helper to keep the bike upright.Solid and lightweight all-in-one, easy to maneuver and adjust. I should have bought one of these years ago for my fatboy as it would have made that maintenance a breeze.
Kev
Reviewed in Canada on March 27, 2024
Yo cant find a better Motorcycle wheel chock on the market! With the trailer adapter this chock is used in the garage as well as on my trailer when it’s time to transport. I am more than Happy!
Peter L
Reviewed in the United States on December 21, 2024
I was hesitant purchasing such an expensive motorcycle wheel chock but so glad I did. The engineering and quality in this chock is awesome and worth every cent. Ended up purchasing a second one also for my other bike. I installed both in my enclosed trailer with the extra adapter kits. The adapter kits are bolted to the trailer floor. This allows me to slide the wheel chock into the adapter to hold it securely when transporting my motorcycle but then easily slide the wheel chock out of the adapter when not needing the wheel chocks allowing full access to my trailer for other purposes.
Hotdog
Reviewed in the United Kingdom on April 2, 2022
Quality isn't cheap.Perfect for holding bike. Leaves hands free to use rear Paddock stand.
Vinny
Reviewed in Canada on September 4, 2021
I currently have it secured to my garage floorUnfortunately very difficult to remove bike from chock,I have to use 6”blocks to stand onto get enough height to push it out of the chock and use front brake to hold it and get back far enough out of chockI own a 2018 RG CVO Harley,so not a lite bike about 960 lbs
Glenn
Reviewed in Canada on November 6, 2019
Bought 2 of these for securing our Harleys in our toy hauler 5th wheel. Just finished a 5000 km trip and they worked flawlessly.
Duane Boosamra
Reviewed in Canada on June 8, 2018
Arrived very quickly after ordering. This thing is perfect for my trailer, shop and bike. I have a 2003 Harley Davidson Road King Classic and it fits like a glove!Very solid and sturdy and easy to use alone! The included (didn’t mention this on the Amazon sell page) makes it very simple to attach to the trailer but easily is removed keeping my trailer versatile for other uses!Excellent product!
PhotogDog
Reviewed in the United States on January 11, 2013
First off folks, this product, the Condor PS-1500 is everything they said it was and a heck of a lot more! The PS-1500's fit and finish, function, ease of assembly and use are a true 5+ Star all the way and it is "Made in the US of A" too! These guys, Condor Manufacturing and my Supply guys, Big Bad Power Supply are a Hot team. I ordered the PS-1500 from Amazon, best price out there, on Jan 8th 2013 and UPS dropped it on my door step Jan 10th 2013, talk about greased lightning being fast!! The packaging was as strong as the PS-1500 itself. I opened the box with ease, read the directions and assembled it all in about 10 minutes flat. Went so fast, didn't even have time for a beer! I have a full dress Yamaha Midnight Venture with extras, weighing in at about 1,000 lbs. + - and park it in my garage on a flat concrete surface. I laid the PS-1500 in position on the floor, adjusted the cradle to the second whole from the entry end, got my Yamahoppie and pushed it up onto the cradle and forward a touch past center with ease and cha-zam, locked into place solid and fast without hardly any wobble or side movement!! No tie downs required unless you have some spunky youngsters about, I don't, and want a little bit more safety. This puppy is as solid as a rock, function & design and I completely recommend this investment for every bike owner. My bike now takes up one third less room in the garage, makes it easer to clean, polish and maintain than when leaning over on it's kick stand. Should have gotten one of these 50 years ago and made life easer for sure and all those years the wife was picking on me about all the garage space I took up with my bikes, she now smiles and gives me a big wink, saying what a slow learner I am!! ;-) Great product by Condor, Made In The US of A by Americans and a Red Hot Supply Company "BIG Bad Power Sports" ta-boot... Talk about, "Win, Win, Win", this is it boys & girls. Stop looking and start buy-in!V/R Kent M Whitney, USN EOD/CB Very Retired, still riding and pushing 70, "Hot Dog"!
Recommended Products
