Your cart is empty.
Your cart is empty.Stainless Steel Table for Prep & Work 24 x 18 Inches with Caster Wheels
Steve K.
Reviewed in the United States on March 5, 2025
A fair bit of assembly is required.Hex wrenches are provided but they don’t have room to rotate more than halfway per turn, so it’s wise to have your own power driver with metric hex bits. It’ll go about 20x faster.Also, the plastic protectors on the tabletops aren’t too hard to pull off but it comes off far more easily and in one piece with a heat gun. A blow dryer should work too. Or put it out in the sun. I was prepared to use mineral spirits to help clean up the adhesive residue but it came right up with some ordinary window spray.The tabletops look decent with a thorough cleaning, especially after a stainless steel “cleaner/polish/oil” is applied. They’re just a bit scratched and scuffed, which seems to have happened in the factory before the protective plastic went on.The wheels are a grippy rubber that is heavy duty, and the brakes are likewise pretty solid and definitely won’t allow the wheels to spin when applied. Unfortunately they’re not quite compatible. The TEETH of the brakes will chew into the rubber over time if they’re left applied, permanently denting the rubber and causing it to WHOMP WHOMP WHOMP as it rolls just like on a defective shopping cart. One of the brakes was left down when my unit was packed and the result on arrival is a badly, permanently dented tire.Somewhat pricey at $100 but pretty solid overall and should make a good work room project table.
Marsupialite
Reviewed in the United States on March 4, 2025
I love this so much. I have been looking for a potting table that would hold all my heavy gravel and potting soil, but also be able to move it out of the way in my shed. This fit the bill to a T! First of all, you do have to peel all the sticky off of every flat surface. If you know that's the deal though, you can be prepared. I sat in front of the TV one night and patiently, slowly peeled and I was able to get it all cleared in about an hour. But I love stickers so maybe I'm unique! A plastic wallpaper scraper may help if you are struggling. It was definitely worth the trouble, because once I got it to my shed, I was able to put 3.5 bags of gravel - at 50 lbs each - on the bottom shelf and easily continue rolling it. It will hold up well to the weight and use I look forward to. It's a perfect height for standing and potting as well, with the brakes on. Because it's stainless, it'll be easy to wash/wipe down when I'm done potting. It might be a bit pricey for a fun gardening accessory, but if you can afford it, it'll be the last one you ever buy!
A. Thankful
Reviewed in the United States on March 3, 2025
This is a nice addition to my home kitchen. I used a Professional stand mixer on it and with a double batch of rye bread dough in it, it rocked much less than my other metal table I usually use. I love the caster wheels with brakes and that it isn't too big or too small.HOW TO REMOVE PLASTIC FILM:1. Peel cover off table top by starting a corner and working the plastic in one piece slowly working side to side.2. DO NOT use a widget or try to heat it to remove it. Ours removed in under 3 minutes in a cool 60 degree garage.3. The key is to pull slowly but firmly a large piece.HOW TO ASSEMBLE TABLE:1. Legs have plastic wrapped around them. Find a place where it starts and it will come off as one piece.2. Assemble legs. DO NOT INSERT AND SECURE THEM IN THE TOP.3. Peel cover off bottom shelf as you did the top.4. Insert one leg in the top.5. Line up bolt and washer and attach shelf to the leg at your desired level--DO NOT TIGHTEN.6. Insert leg that is diagonal to the first one.7. Attach shelf to leg as in step 5.8. Insert other two legs and attach as in step 5.9. Tighten bolts holding shelf to legs.10. Using set screws, secure legs to the top.11. LOCK caster wheels brake and screw them into the legs. Tighten by turning until secure.Bottom line: This is a great heavy duty work station for my kitchen. It cleans easily, and can hold a nice amount of weight. The wheels are solid and help me to move things around my kitchen.The included directions in the box are a bit sketchy, but by removing the plastic film the way I stated, it should be easier than some of the reviews depict (see pics)...
cb
Reviewed in the United States on March 1, 2025
this is a nice table. Very well made. no sharp edges, nicely stamped and folded. Sturdy. Well packaged. arrived without damage in spite of some dings to the box. Heavy duty wheels that roll and lock easy. Assembly was pretty easy by myself. It comes with everything you need to assemble, including gloves. It takes a 4 and 6 mm hex (allen) wrench included. instructions are pictorial but pretty easy to follow. I put all of the legs together and inserted into the top (face down screws only threaded a bit, they're short). the bottom shelf was held in place by spreading the legs to slide it down to the position and then threaded the longer screws in. One person assembly, Nice! Once everything was where it needed to be I tightened everything as best i could. I might need to use a bit of blue lock-tite if it gets wobbly. Its 18in x 24in and at a 34in height its a good height for me. One thing i noticed is the legs at the top are held by compression . No threads. I think one could cut a couple of inches off the top to customize the height. Its SS so a chop saw might be needed. Or a strong arm and a few hacksaw blades. Double-sided tape on a cutting board might be in order. Its SS so drilling will be tough.i would definitely buy this again.
Yamilka Garcia
Reviewed in the United States on September 29, 2024
Excelente para mantener equipos grandes de cocina organizados y fácil de mover .Puedes tener hasta dos equipos fijos en esa mesa .Muy fuerte ,buen material y fácil de ensamblar.Ruedas grandes y fuertes .
Kindle
Reviewed in the United States on November 24, 2024
So easy to assemble. Large easy to roll wheels. This table is substantial and holds my heavy meat slicer very easily. Very stable. Good purchase!
Eliana Selzer
Reviewed in the United States on November 12, 2024
As another reviewer said, it took 45 minutes to get that plastic film off the stainless. That makes it very painful. It took no time to put together at all but twice as much time to get annoying plastic film off. There has to be a different way to do this.
Recommended Products
$100.00
$ 46 .99 $46.99
$104.95
$ 50 .99 $50.99