Your cart is empty.
Your cart is empty.Product Description
Clip-on Anti-Interference Ferrite Core Noise Suppressor
- VSKEY Noise Filters Ferrite Core,Helps reduce EMI on AC power lines; Improve the electromagnetic field around the solenoid, thus avoiding outside interference. improve signal integrity and improve the signal quality of audio and video. (Please check your device and ensure that the sound is not caused by equipment failure.)
- Choose from a variety of size to ensure the best for you needs. Product Specification and Wide Application:
- 3.5mm(0.14inch) Inner Diameter Noise Filter : Suitable for 0.06inch - 0.14inch / 1.5mm - 3mm outside diameter cables, Such as: Car DVR, Headset Cable, Loudspeaker Cable, Mouse Cable, Keyboard Cable, USB Cable etc.
- 5.0mm/(0.2inch) Inner Diameter Noise Filter:Suitable for 0.14inch - 0.2inch/3.0mm-5.0mm outside diameter cables, Such as: Headphone,Car DVR, Loudspeaker Cable, Mouse Cable, Keyboard Cable, USB Cable, RS232 Serial Port Camera Cable etc.
- 7.0mm/(0.275inch) Inner Diameter Noise Filter: Suitable for 0.2inch - 0.27inch / 5.0mm-7.0mm outside diameter cables , Such as: Printer,,HDTV,HDMI,AV
- signal cable, Coaxial cable, Audio Power Line, IP Serial Port Camera Audio Video cable etc.
- 9.0mm / (0.35inch) Inner Diameter Noise Filter: Suitable for 0.27inch - 0.35inch / 7mm - 9mm outside diameter cables, Such as: HDMI Cable, VGA Cable, DVI Cable, Power Line, Loudspeaker Cable, Industrial Cable etc.
- 13.0mm / (0.5inch) Inner Diameter Noise Filter: Suitable for 0.35inch - 0.5inch / 9mm - 13mm outside diameter cables,Such as: HDMI cable, IP Line of Communication, DVI Cable, Overstriking VGA cable Industrial cable etc.
VSKEY - Clip-on Noise Filter
- Easy to install with double snap clips,can be dismountable,Just snap clip it on to a cable easily,superb at reducing EMI and RFI high frequency interference caused by home appliances and electronics.Get clearer signal and audio sound quality.
- （If the wire is too thin too loose or you want get better anti-interference effect, you could wrap circles it around more. ）
HOW TO USE?
- 1. Open the snap joint.
- 2. Put wire into the ferrite
- 3. Snap on and the core neack. interference will be remoced.
- Install the ferrite core at the equipment side of the cable. If a cable has equipment that needs to be protected on both sides, install one at each end.
Wide Application
VSKEY Noise Suppressor Cable Clip is Great for cutting noise on USB, firewire, phone, power cord, coaxial, audio, video cables, etc. This rectangle ferrite Bead can be widely used in a variety of Data cables, USB cable, telephone line, network line to shield external electromagnetic interference.Just clip it on and you will get clearer signal and faster data transmission.Doesn't cause distortion of the transmitted signal.
Customer
Reviewed in the United States on May 8, 2024
BUENO
Rurik Osipich
Reviewed in the United States on March 23, 2024
My microwave used to drive my on-demand water heater mad. Without warning the water heater would click relays and start beeping sometimes when the microwave was running. I put four of these on the microwave power cord close to where it came out of the case. Problem solved! It did take four though, still acted up a bit with only three.
Will
Reviewed in the United States on February 11, 2024
Reinstalled my LED auxiliary backup lights after getting rear-ended but they didn't get along with the new backup sensors and whenever the lights were on the backup sensors would go off like I was right against an object behind me. I really didn't think these would work but they did. Now my backup sensors work normally. I was very surprised and very happy. But like another reviewer said it's really hit or miss it all depends upon what frequency the RF is at.
Zoogie
Reviewed in Australia on April 12, 2024
Anti-Interference "chokes" don't always do much at all. These are very well made but may not make any perceivable difference.
Customer
Reviewed in the United States on February 14, 2023
These ferrite filters were the ticket to suppress the noise (EMI) on my CNC equipment, easy to install and compact enough to fit in tight spaces.
Delmustator
Reviewed in the United States on November 27, 2022
Got these to block RF on woven cover guitar cables. Measurement of the guitar cable is just under 7mm OD. The 7mm ID chokes will not close over this cable. They work fine over slim audio cables and power cords. Gonna have to probably get the 10mm for them to fit.
BW
Reviewed in the United States on April 18, 2022
Had issues with radio interference in vehicles using LED lights. On one vehicle, the LED's were accessory flood lights. These seemed to work ok on them. Still a little static, but definitely an improvement. On the other vehicle I used them on the LED headlights. It didn't change anything. Still the same amount of static. So it's hit or miss whether they will work for you or not.
Simon
Reviewed in the United States on November 1, 2020
I was already using double shielded heavy duty thick RCA cables for my car audio. I wasn't hearing the typical whirring feedback, but rather a rapidly clicking feedback sound. This product did not help. I believe this product is intended for poorly shielded cables. But if you already have properly shielded cables then your feedback sound is due to some other problem. Nevertheless I tried this other product from Amazon which actually worked for me... https://www.amazon.com/dp/B000BCDQ44/ref=cm_sw_r_cp_apa_i_leZNFb2DDNN88?_encoding=UTF8&psc=1
Harley Hal
Reviewed in the United States on March 15, 2018
I have a 1997 Mazda Protege DX with an aftermarket radio in it, I'm restoring it because it was my mother-in-law's car and she passed away about a year ago and I'm going to restore it and give it to one of the kids,, that being said I installed some hid LED headlights with a ballast after I did that I could pretty much only pick up a couple of radio stations because of all the static when the lights were on.I did some research on ferrite and saw this product which I have now purchased and as soon as I installed them on the lines between the LED ballast in the Headlights about 90% of the static left and I was able to receive my radio stations.I have since purchased more ferrite and installed these on my radio antenna and also on the lines coming out of my alternator, and they seem to do a pretty fair job of reducing that static noise that you get in some vehicles on the radio when your turn signals are blinking on and off and so forth if you're having a problem like this I think they're worth giving a try.
Recommended Products
$153.00
$ 70 .99 $70.99