Your cart is empty.
Your cart is empty.Product Description
Features
Ultra-fine Compressed Laser Spot
With an ultra-fine 0.1mm*0.1mm laser spot, this laser module upgrade provides you the possibility for more precise and demanding engraving and cutting projects. You can cut 4mm plywood in one pass.
Stock Air Assist Nozzle
Taking advantage of a stock air assist nozzle and compressed laser spot, this laser module excels in engraving and cutting efficiency. The nozzle also allows for better lens protection and smooth cutting finish.
Eye Protection Design
The laser shied on the module can filter most UV light to protect you from laser beam reflection for safer operation.
Compatibility
This laser module is only compatible with Genmitsu 3020-PRO MAX V2, 3030-PROVer MAX, PROVerXL 4030, 4030V2 & 4040-PRO CNC Router, Jinsoku LC-60A
Note: The laser module comes with adapter plates for Jinsoku LE-1620 Laser Engraver and Jinsoku LC-60A Laser Engraver & Cutter. For Genmitsu ProverXL 4030 & 4040-PRO CNC Router Users, no additional adapter plate is provided, you need to use the adapter plate that comes with 4030 package.
Specifications
- Engravable materials: cardboard, plastic, PCB, aluminium alloy, stainless steel, black metal, etc.;
- Cuttable materials: wood, acrylic, cardboard, non-woven fabric, bamboo,laser safe plastic etc.;
- Optical laser power: 5.5W
- Spot size: 0.1mm*0.1mm
- Focal length: 30mm
- Laser wavelength: 455 ± 5nm
- Input: 12V / 2.5A
- Electrical interface: XH2.54-3Pin terminal (three-core cable, a: PWM +, b: GND, c: 12VDC)
euggg
Reviewed in the United States on January 7, 2025
The first one I ordered broke within a minute - the blue LED stopped blinking right in the middle of the first test image. The SainSmart support at first requested too much info like pictures of all the receipts for the laser and the CNC machine, the cable I use, etc. But after I said that it is easier for me to just return it and get another one, they actually provided helpful guidance, which proved that the laser was defective and the CNC was OK.The replacement I received shortly works fine - cuts and marks the wood and plastic. But all my attempts to mark metals failed. I tried the Brilliance laser ink hoping to get at least some readable mark - no luck. And Gemnitsu do not make more powerful lasers for my PROVerXL 4030, which is very unfortunate.
Scottsw1
Reviewed in the United States on June 10, 2024
While this isn't the most powerful laser, it works well and is easy to get the correct focus using the supplied gauge. I use this on my CNC router to give it the capability to laser projects. I don't use it for cutting materials, but it has enough power to engrave wood and tile.This laser is mounter on my Genmitsu 4030 and the LASER TREE 20W 40W 80W Interface Adapter Board Transfer Board was not needed for this application. I have used Laser GBRL and Lightburn to control the laser and haven't had any issues with either one.
Joseph G
Reviewed in the United States on March 11, 2024
For the prover xl 4030 v2 the instructions included are completely wrong. For this machine it sits inside the 52mm bracket. Had to contact sainsmart for those instructions (they included pics which was great!).3 stars for now just based on that. I have not had time to fully test.Edit; Went to test and it did not work at all. Fan would not turn on and the laser would not fire. Tried multiple softwares including the sainsmart recommended LaserGRBL.Sainsmart nor amazon could figure out so I returned and got the same one. It arrived today and it's exactly the same as the first. Does not work at all.Rating down graded to 1 star.
Wolf Schwarz
Reviewed in the United States on January 1, 2024
Install was easy not hard to do. Do use the connecter supplied by the unit. Only issue I would have, could not find all the specs about the unit as needed when setting it up in the software.
Lance Menard
Reviewed in the United States on January 14, 2023
I purchased this module for a PROVerXL 4030 primarily to cut thin plywood, and so far, I've been very impressed. The laser cleanly cuts through 2.5mm plywood in one pass at 280mm/min, which is fantastic. I've also been able to cut both black and white 1/8" acrylic, which is excellent. I have yet to try cutting thicker plywood or hardwoods, or any engraving, but I'm confident it will do the job. I also purchased a very small $25 fish tank pump to provide air assist.One plus side of mounting a laser on a CNC router (rather than a less expensive dedicated laser cutter/engraver) is the laser software can do a Z-stepdown between passes to change the focal point, which significantly increases cut depth - although this comes with a caveat: the air assist nozzle comes quite close to the material being cut, so if you want to do lots of Z-steps, you probably won't be able to use the air assist.My only real complaint isn't really about the laser, but rather the LaserGRBL open-source software - it's clunky and lacking features - but that's really not a knock on the laser itself. If I was less cheap, I'd just buy LightBurn (and I still might).Installation was pretty much as easy as could be - the laser plugged right into the control box with the provided cables and turned right on. I did have one nitpick: as some other reviewers noted, the screws that came with the laser mounting plate for the 4030 weren't long enough to reach the threaded holes in the back of the laser modules. Fortunately I had some longer screws on hand, but it would have been VERY annoying otherwise.All in all, if you already have a compatible CNC router this module is an inexpensive way to start laser cutting and engraving, reusing the equipment you have!
Seahurst Runner
Reviewed in the United States on June 9, 2022
I've had this unit for about 1 month. It seems well built and setup is easy. Beem is very tight (.1mm x.1mm) making it good for fine detail. Usable cutting depth is a bit overstated but otherwise it's a nice unit.
Recommended Products