Shopping Cart

Your cart is empty.

Your cart is empty.

CFF Olympic 2 Bar & Bumper Plate Tree for Weights - 1000 lb. Capacity Mobile Weight Storage Rack w/Wheels. Perfect for Any Commercial Gym, Fitness Training Center, or Home Gym

Free shipping on orders over $29.99

$299.00

$ 99 .00 $99.00

In Stock

About this item

  • HEAVY DUTY OLYMPIC BUMPER PLATE RACK – CFF’s Olympic Bar & Bumper Plate Storage Rack boast a capacity of up to 1000lbs. & still easily rolls across the floor. Quality of materials used matters, that's why our plate weighs almost twice what most do.
  • CORRECTLY SPACED PLATE HORNS – Each of the 6 – 10.5” plate horns are equaly spaced out so you can load the entire rack w/45 lb. plates & still easily remove or add bumper weights w/out hitting the plates above or below, as well as not catch your fingers
  • COMMERCIALLY RATED – Built to withstand use in a commercial or residential gym. We guarantee the CFF FIT Bumper Plate Storage rack for 5 years on the frame where most companies are only warranting the rack for 1 – 2 years.
  • BAR STORAGE – Each Olympic Bar Storage tube has a plastic sleeve to prevent your bars from rubbing up against steel, protecting your bars all the way around from getting scratch or having premature wear.
  • ROLLING BUMPER PLATE STORAGE RACK – Quality, Longevity, the CFF Olympic Bumper plate storage racks are manufacture w/ high weight capacity wheels, high end urethane wheels, and high end bearings in the wheel swivels so they do not fail under a heavy load.



Product Description

CFF Dual Olympic Bar & Bumper Plate Tree - Weight Storage rack w/wheels

1000 lb. Capacity and it will still glide across the floor!

  • HEAVY DUTY OLYMPIC BUMPER PLATE RACK – It is not about how much you say it can hold, but the quality & longevity of the plate storage rack. CFF’s Olympic Bar & Bumper Plate Storage Rack boast a capacity of up to 1000lbs. & still easily rolls across the floor, due to the high quality materials CFF manufactures with. 99% of similar plate trees manufactured by other companies weigh between 22 lbs. & 38 lbs.; CFF’s comes in at 66 lbs. shipped. What you’ll get from CFF is quality where it counts.
  • CORRECTLY SPACED PLATE HORNS – Each of the 6 – 10.5” plate horns (weight pegs) are proportionally spaced out so you can have the entire plate tree loaded with 45 lb. plates and still easily remove or add bumper weights without hitting the plates above or below, as well as not catch your fingers in-between the different levels of plates.
  • COMMERCIALLY RATED – Built to withstand use in a commercial or residential gym. We stand behind the CFF FIT Olympic Bar and Bumper Plate Storage Tree, that means you are covered for 5 years on the frame where most companies are only covering the rack for 1 – 2 years. We care and stand behind what we manufacture and sell.
  • BAR STORAGE – With 2 two Olympic Bar storage spaces, neatly and safely store your Olympic bars off the floor. Each Olympic Bar Storage tube has a plastic sleeve to prevent your bars from rubbing up against steel, protecting your bars all the way around from getting scratch or having premature wear.
  • ROLLING BUMPER PLATE STORAGE RACK – Only the best! Where most companies try to find the cheapest wheels because they are only worried about costs, we care about the quality and longevity of our equipment. The CFF Olympic Bumper plate storage racks are manufacture with wheels that have a high weight capacity, high end urethane wheels and high end bearings in the wheel swivels so they do not fail under a heavy load. Also includes two sets of locking wheels to keep your rack in place.

Designed to handle 800lbs. + of mixed bumpers or 1000lbs. of steel plates on its 6 plate horns, the CFF Olympic bumper plate storage rack is up to the task. Heavy duty caster wheels make it easy to move this plate storage rack wherever it is most needed (or least in the way). Unlike most companies, we invested in high quality urethane swivel wheels that glide easily, regardless of the weight on the rack; they are worth the added cost.

Here's a nice little way to keep your workout area neat and tidy. Get those plates off the floor! Give your bar a break! Load up all those un-used plates on our 6-peg bumper plate storage rack.

  • Total weight capacity: 1000 lbs.
  • Finish: matte black powder coat
  • Dimensions: 26" L x 26" W x 52" T
  • Plate horns: 11" long
  • Weight: 66 lbs
  • 4 Heavy Duty Urethane Caster with a 400 lb capacity. Total wheel capacity, 1600 lbs.
  • Each rack has its own unique identifying serial number to we can track quality control

Competition Kettlebell Exercise & Workout- Kettlebells are an excellent choice to Start Strength Training

olympic bar storage rack and bumper weight tree

COMMERCIALLY RATED

Built to withstand use in a commercial or residential gym. We stand behind the CFF FIT Olympic Bar and Bumper Plate Storage Tree, that means you are covered for 5 years on the frame where most companies are only covering the rack for 1 – 2 years. We care and stand behind what we manufacture and sell.

heavy Duty Weight tree wheels

OLYMPIC BAR and BUMPER PLATE SPECS

  • Total weight capacity: 1000 lbs.
  • Finish: matte black powder coat
  • Dimensions: 26" L x 26" W x 52" T
  • Plate horns: 11" long
  • Weight: 66 lbs
  • 4 Heavy Duty Urethane Caster with a 400 lb capacity. Total wheel capacity, 1600 lbs.
  • Each rack has its own unique identifying serial number to we can track quality control

olympic Barand bumper plate tree with plate horns

CORRECTLY SPACED PLATE HORNS

Each of the 6 – 10.5” plate horns (weight pegs) are proportionally spaced out so you can have the entire plate tree loaded with 45 lb. plates and still easily remove or add bumper weights without hitting the plates above or below, as well as not catch your fingers in-between the different levels of plates..

Experienced, Design, Quality, Knowledge

CFF Strength Training Equipment SuperStore - Your Gym Suppy Warehouse

Experienced, Design, Quality, Knowledge

Since 2005, CFF FIT has been designing, manufacturing and selling quality commercial grade gym equipment, not only for the commercial gym, but for the home owner who wants a long lasting, sturdy piece of gym equipment or wants to build a home gym with more than just the cheapest piece of equipment you can find.

Your Safety and the Quality of CFF FIT Strength Equipment is Our First Priority

Olympic gym Ring training

At CFF Strength Training Equipment, we never put costs before safety. When it comes to gym equipment, you are usually talking about something that can cause a serious injury if the equipment fails. Weight benches, dumbbells, squat racks, Olympic bars, kettlebells, your first thought should be safety, then quality, and last cost. Yes, cheap gym equipment sells faster, but in the long run, those companies only care about their bottom line, not your well being.

SAFETY & DESIGN - At CFF, your safety is first. We can proudly say that we over build all our equipment so you can worry about lifting and not the equipment failing. We find possible weak points in exercise equipment like the adjustable incline bench, pull push weighted sled, harnesses, or squat racks and reinforce those areas so they never fail on you.

QUALITY - If you want a well built, safe piece of exercise equipment that will last a lifetime, then we have you covered. CFF uses heavier gauge steel, denser cushions, more durable seat covering, better quality steel then our competition. This is one of the reasons you will find knock off equipment that looks like ours, but weighs two thirds or half of what our equipment weights.

TESTING - Along with higher quality materials, we are extremely involved in the manufacturing process and place an emphasis on quality control with our employees. CFF equipment is usually in testing for 1 - 2 years, depending on what it is, before we will even bring it to the market. This is one of the reasons that we have never had a claim on our bumper plates and the Keystone needle bearing Olympic bar. This is also why our equipment cost us more.

So if you are looking for the cheapest bench or kettlebell you can buy, then we cannot help you, but if you are looking for a safe well manufactured piece of gym equipment from a company that cares, then we are here for you.

You put in the effort, so why shouldn't your equipment live up to your needs.

The best kettlebell - K2 Powder Coated Kettlebell Weights
Best Wall Medicine ball - 14 inch
Best Weighted Push Sled - Pull Sled

wyllis chu
Reviewed in the United States on May 3, 2023
awesome weight tree but a hella pain in the butt to put together. once put together though ,it's great and holds my bumper plates with no problems and also rolls fairly easily. of course the more weight you have on it, the more difficult it is to roll but it doesn't stall, get stuck or unnecessarily roll.
Nerdneck
Reviewed in the United States on June 9, 2020
Purchased this as an upgrade for the Corona lockdown garage gym. Very easy to put together, seems like it will last. I loaded it up with 435 lbs of plates and it felt rock solid and I was able to easily push it across the garage and easily position it. The bar storage is nice, no more tripping over bars. Two of the casters lock so hopefully that will keep my boys from accidentally sending it down the driveway!
JOHN soria
Reviewed in the United States on April 6, 2020
The instructions and photo clearly state there should be 3 plate holders and mine only came with 2. With the cost of this rack, I don’t see how the manufacturers could forget a critical component. On top of that, it’s out of stock so I can’t return it and expect to get another one. I will change my review to 5 stars if I get mailed another plate holder. Please and thank you!
Wiggint
Reviewed in the United States on April 28, 2019
This sucker is stable and strong. I don’t know any improvements it could have other than maybe a rubber piece at the bottom of where the barbells are held. To be sure, I haven’t ever seen a holder that comes with something like that. I put round rubber things that go under couch feet down in the holder.
cord
Reviewed in the United States on April 26, 2019
I received this tree last week and it is a good value compared to other weight trees out there. The frame is sturdy with heavy duty wheels and long chromed pegs that should fair a lot better than powder coat pegs. The pegs do wobble and sit unevenly because they are only anchored in the middle by bolts and the frame holes they pass through are larger than they need to be for the pegs. The bar holder sleeves are only protected by plastic at the top, inside the sleeves it is bare rusty metal with no rubber stop at the bottom so if you have a prized barbell, do NOT store it on this tree. Overall the tree is decent but the bar holders and wobble were a bit disappointing.Also, mine arrived with a few chips in the powder coat which I've now patched up with primer and rustoleum. The company was kind enough to issue a small refund to offset the cost. Great company to deal with.
Customer
Reviewed in the United States on July 26, 2017
Positives:1. Easy to assemble2. Looks Nice3. Bar holders are helpfulNegatives:1. The plate holders don't screw down tight enough and still wiggle2. It says, will hold 1000 pounds - I have 1000 pounds on it and it sways somewhat when I move it around3. The casters need to be bigger, I can barely move it with 1000 pounds on it
Dave
Reviewed in the United States on February 3, 2013
Works great. It only took about 10 min to assemble and was really easy. I have 580lbs of weights, a mix of bumper plates and metal Olympic plates, and it is very solid. I've had one side bare and the other side loaded with over 250lbs of weight and it didn't budge. My only complaint is that when I received it the one lip to attach the leg too was bent. I straightened it out when I tightened everything up. Not a big deal. The welds are very solid and I would definitely recommend this product. I might oust some casters on it to make it mobile.
coll
Reviewed in the United States on November 20, 2013
I ordered this as a gift for my husband and we love it! It was super easy to put together (I did it by myself!) and my husband was totally surprised. It is very sturdy and holds all our weights with no problem. It doesn't take up too much room and helps keep our gym organized!
Recommended Products

$138.50

$ 66 .99 $66.99

4.8
Select Option