Shopping Cart

Your cart is empty.

Your cart is empty.

CERRXIAN RS232 to Ethernet Serial Device Server, 1 Port RS 232 DB9 Serial to Ethernet TCP IP Device Server Converter

Free shipping on orders over $29.99

$25.97

$ 13 .99 $13.99

In Stock

About this item

  • ACCESS SERIAL DEVICES REMOTELY -It is design to realize bidirectional transparent transmission between RS232 and Ethernet.Use this RS232 to Ethernet IP converter to connect, configure and remotely manage RS232 serial devices on an IP network.
  • QUICKLY CONNECTS DEVICES TO THE INTERNET - The rs232 to ethernet converter supports 300 baud to a 230400bps data rate, connecting a serial device to the ethernet instantly.
  • MULTIPLE CONTROL MODES - Support Auto-MDI/ MDIX, RJ45 Port with 10 / 100Mbps. Support Work Mode: TCP Server, TCP Client, UDP,VCOM.Support Flow control CTS/RTS.
  • FLEXIBLE INSTALLATION - The rugged aluminum housing with mounting bracket provides reliable performance that can be used in almost any environment.
  • WIDELY COMPATIBLE - Support all Windows systems, such as XP/WIN7/WIN8/WIN10.Suitable for CNC machinery, process control equipment, serial printers,access key panels, video cameras, card readers,etc.TIP:If you need a drive, please contact us.



Product Description

serial device server

Serial Device Server - Bidirectional Transmission

  • The rs232 to ethernet converter is designed for PC software that uses serial port mode and cannot communicate with networked devices.
  • Receive the data of the specified virtual serial port, and then send the data out in the form of network data, and convert it back to serial data.
  • It is internally integrated with TCP/IP protocol.User can apply it to device networking communication.

db9

UART Interface - RS232 Male

  • PIN 1: DCD
  • PIN 2: RxD
  • PIN 3: TxD
  • PIN 4: DTR
  • PIN 5: GND
  • PIN 6: DSR
  • PIN 7: RTS
  • PIN 8: CTS
  • PIN 9: RI

rj45

Network Interface - RJ45 Port

  • Support IEEE 802.3、IEEE 802.3u、IEEE 802.3x
  • Support Auto - MDI/MDIX
  • Network transmission rate:10/100Mbps

led

LED Indicator

  • Power Indicator: Red.(The indicator Light long bright after connecting a power adaptor.)
  • LINK/ACT Indicator: Green(The indicator lights and flashes when connected to the network.)
  • TX/RX Indicator: Green(The indicator flashes during data transfer.)
SERIAL DEVICE SERVER

Support Flow control CTS/RTS.

  • Power Consumption<1.8 W
  • Operating Temperature -10-50°C.
  • Storage Temperature: -20~70°C
  • Humidity: 10%~90%, no condensation

RS232 to Ethernet

Support Work Mode: TCP Server, TCP Client,UDP,VCOM

  • Processing high current,stable output
  • ESD protection system, 15KV ESD (Electrostatic Discharge) protection
  • Support virtual serial port(VCOM)
  • Suppor Web Browser Settings
  • Support Baud-rate 300bps~230400bps
  • Support Reload function
  • Support Modbus RTU
tcp server

TCP SERVER MODEL

  1. The serial server listens on the set port and waits for the TCP client to connect.
  2. The data sent by the serial port device will be transmitted transparently through the serial port server to all successful clients.
tcp server

TCP CLIENT

UDP MODEL

WIN

SIZE

FLEXIBLE INSTALLATION

  • Size: 7.1x5.7x2.3cm
  • Housing Material: Aluminum
  • The rugged aluminum housing with mounting bracket provides reliable performance that can be used in almost any environment.

APPLIACTION
Application:

  • Industrial Data Transmission, Industrial Automation,Security and Protection Monitoring, Public Security,Smart Home, Power Control, Environmental Monitoring, Power Monitoring,Self-Service Banking System, Telecom Machine Room Monitoring,CNC Machinery, Process Control Equipment, Serial Printers,etc.

Connection Steps

  • 1) Turn off the PC's firewall and anti-virus software, and disable network cards that are not related to the test.
  • 2) Set the PC network card IP address to the same as the serial server, such as: 192.168.2.68.The default IP address of serial server is 192.168.2.1.
  • 3) Connect serial server and PC with a network cable.
  • 4) Connect the serial server and PC with a serial cable.
  • 5) The serial server is connected to DC power, the power indicator is on, and the LINK/ACT ligth flashes after self-test.
  • PACKAGE:
  • 1x Serial Device Server,
  • 1x 1.5m DB9 Female to Female Serial Cable,
  • 1x DC 5V Adapter,
  • 1x User Manual.

Ralph E. Decker
Reviewed in the United States on September 10, 2024
Cannot connect to it. Same problem as multiple other reviewers.
Mark C.
Reviewed in the United States on August 2, 2023
This is easy to configure - the default IP address is printed on the device, along with the default username and password. Configure your PC to that network, browse to it with your favorite web browser.I set mine to us a static IP address in our company's data subnet.TCP mode, I set it in Server Mode using the standard Telnet port number 23. I set the Server-mode timeout to 60 minutes.UDP mode - I left this disabled.UART - I set it to 9600, 8, none, 1. hardware flow control - I have tried it both enabled and disabled - both give me the same result.Deliminator - I left this all unchecked.I am able to log into and manage a Mitel SX200 EL. With the exception of backups everything seems to work.I have another similar device that is allowing backups to work through it, but that company isn't around anymore.We will try another device and see if we can get something that will permit backups through it. When we do, we will deploy them to our customers to allow us to remotely manage their phone systems.
vtgearhead
Reviewed in the United States on December 1, 2022
By fumbling around I was finally able to get this working. In particular, there is no explanation for the 'delimiter' character options under UART - not even the expected radix (is decimal or hexadecimal argument used, and if the latter what format, e.g. 0x0D vs 0Dh?). Honestly, how much more effort would it have taken to outline these?
Raymond R.
Reviewed in Canada on May 19, 2021
I bought this device But can not get online with it. Notified the seller they said they would replace Nothing after months.
Tony F.
Reviewed in the United States on March 15, 2021
But it took a week to set the converters up for use. The instruction manual, half English/Chinese gives no instructions - only clues. If you are not an IT configuration exper I would look for converters with instruction written for the average user.Tony in PA
Johnn Gutierrez
Reviewed in the United States on April 24, 2021
No es un serial serve, es un serial to RS232 y se requieren dos para que el sistema funcione.la idea del fabricante es que la señal entre como serial , se transporta como serial y sale coo serial.se requiere uno dispositivo en cada extremo para que funcione.***No realiza la misma funciona que un "Serial over IP Ethernet Device Server" que solo requiere un dispositiv para operar y la señal entra como seria y se transporta como protocolo tc/ip y se puede acceder con un solo dispositivo desde cualquier software.
Matthew
Reviewed in Canada on October 28, 2020
No driver included, terrible manual, cannot connect. Ended up buying another one that had zero issues and was easy to use
Recommended Products