Your cart is empty.
Your cart is empty.
Specifications:
Material: ABS
Color: white
Size: 1.97 x 0.39 x 0.98 inches
Weight: 100g/3.53oz
Quantity: 1
Volatge: 12V
Operating Temperature: -10℃-60℃
How to Train for Tire Pressure Monitior Sensors TPMS?
-Step 1: You should turn the ignition switch to the off position.
-Step 2: You need to depress and release the brake pedal.
-Step 3: You should turn the ignition switch from the OFF position to the RUN position 3 times and finally stop at the RUN position.
*If the training mode is successfully entered, the horn will sound once and the TPMS indicator light will flash.
*The message center will display “TRAINING LOW FREQUENCY TIRES” if equipped with the unit.
-Step 4: You will need to place the TPMS activation tool at the left (driver's side) front tire sidewall valve stem.
*Press and release the test button on the TPMS tool repeatedly until the horn beeps.
(It may take up to 6 seconds for the tool to activate the sensor; leave the tool on the tire sidewall for 6 seconds).
*The horn beeps to indicate that the body control module has recognized the TPMS sensor.
-Step 5: You should place the TPMS tool on the sidewall of the right (passenger side) front tire at the valve stem within 2 minutes of the horn sound confirming LF tire programming and press the test button to activate the sensor.
-Step 6: You will need to repeat step 5 for the right rear tire and the left rear tire in turn. you can end when the last tire has been trained.
*When training is complete, the message center (if equipped) will display “Tire Training Complete”.
*For vehicles not equipped with a message center, the message center will display “TIRE TRAINING COMPLETE” when training is successful.
Adim
Reviewed in the United States on January 20, 2025
The device is very compact,Comes with no instructions.No readings on the device other than the led and “TPMS Reset Tool”.You will need to find instructions somewhere if you want to use this device.
Recommended Products
