Your cart is empty.
Your cart is empty.Get the extra leverage you need to break loose frozen and stuck nuts and bolts. Extended 30 in. length, 25% longer than standard, gives you extra leverage and makes your job easier. 1/2 in. drive with 30 in. of extended length. Chrome Vanadium body and Chrome Molybdenum head for extra strength. Spring loaded ball bearing ensures sockets are securely held. Rotates 230-degree for dynamic utilization in a variety of jobs. This powerful breaker bar functions as an extension bar that securely holds socket wrench style sockets with extra leverage to break loose frozen and stuck nuts and bolts.
george
Reviewed in the United States on March 2, 2025
Good
Cisco
Reviewed in the United States on January 14, 2025
My order arrived on time and I used a 4' pipe on the bar to break loose a 300 ft lb 36mm nut free and install new ones.....the breaker bar held up and is in perfect condition.
Al C.
Reviewed in the United States on January 14, 2025
Have to reorder, broke the end off.
Jason S Baker
Reviewed in the United States on January 1, 2025
I'm getting older so I can bust loose those tight bolts with less effort. But you need to understand that as with all tools it will break if you over do it. Plus the fact that this is so much longer it would be easy to do. I understand the whole leverage thing so I'm sure that I won't have any problems. If you are older or getting older and are tired of those extra tight lug nuts this thing takes them off no problem with little effort.
peleg ben yakar
Reviewed in the United States on July 2, 2024
badass tool, helped me get my wheels of, helped to open oil drain plug in a car where wratchet failed to.and its really as long as you order it. I got 82 cm
Gary Gun
Reviewed in the United States on May 2, 2024
Purchased for easy off wheel lug nut removals. Alloy rims/tires easily unlocked from >129 ft-lbs vehicle wheel lug nut specification. 30inch length bar makes easy work of 21mm lug removals.. capri brand bar does not flex in this twenty lug nut off task. In my old hands this tool is less worry, in longer term storage than a battery powered impact wrench. Relatively thin storage profile takes up minimal space on the edge of my trunk for emergency use. Fits the task perfectly for my applications. Bar has a replacement warranty for a lifetime of use. Reliably works for me and is worth the value for money purchase price.
Mark Lubbock
Reviewed in the United States on February 18, 2024
The longer the bar the greater the leverage. Also, the greater the tendency to deform and flex or bend. I bought this to break loose bolts tightened to 150 foot-pounds! The cost on this was comparatively low so I was curious as to how it would work when really stressed.I was doing drive gear work on my motorcycle and had several fasteners to break loose. None had ever been loosened since factory install over 24 years ago, so I expected to have serious effort expended. To my delight it was PERFECT for my job needs. In use it showed very little flexing and honestly, did not require too much power to break loose even the largest and most tightly torqued fasteners!I watched videos of big, strongly muscled guys doing the same job I had where they strained and had great difficulty breaking loose the same fasteners I addressed. Mine were red Loctite coated too, yet the leverage from this breaker bar did the job well.It has a place of honor in my shop and is my immediate go-to for any bolt or fastener I think is going to be a challenge. Recommended.
Woodshopper
Reviewed in the United States on October 23, 2024
I wanted a heavy duty breaker bar and this one is definitely heavy duty.
jasonanonuevo
Reviewed in Saudi Arabia on September 14, 2022
Very solid tool. It did do the job. Just buy separate the bit hex you need.
Proud Single Dad
Reviewed in Canada on July 12, 2020
OverviewI bought this to do tire changes.My normal socket wrenches are far too short to get the leverage required to break free stuck on lug bolts. The only long wrench I have is a 30 inch torque wrench...and you do not want to be using that rather delicate mechanism to break the blots free. A breaker bar is considerable cheaper...I have used this bar several times already for tire changes. I also used it to remove a old rusted on door hing from a barn. The force you can generate from the 30 inch fulcrum is amazing.Build quality is heavy duty. I like the f act that it does not ratchet...that's just one more thing to break when you are removing frozen nuts and bolts.A must have addition to your tire changing kit.Tip: I don't recommend using this to tighten bolts, even ones where you don't need to worry about a specific torque setting. The length just creates too much force with very little elbow grease. You will end up either stripping out the threads or snapping the bolt or socket or torque head. This is purpose built to remove stuck fasteners.... Pros-Great value-Simple design and very heavy duty-A prefect compliment to your 30 inch torque wrench.Cons-NoneRecommendation – Would buy it again and would highly recommend.
Z240Z
Reviewed in Canada on August 7, 2019
Used this already on a brake job, it helped me loosen rusty bolts.Note that typical br. Bar is 1/2 inch and too big to fit many situations,this one is just right. ( I have a 1/2 br. bar too)Happy with this purchase.
stan
Reviewed in Australia on October 25, 2019
Excellent product prompt delivery
Miguel A.
Reviewed in Mexico on September 24, 2018
Funciona muy bien,no creo resista el torque que marca la publicacion pero para hasta ahora la eh utilizado constatemente y me ha funcionado bien para torques de hasta 150 Lb/ft
Recommended Products
