Your cart is empty.
Your cart is empty.
Introducing the Canopus Adhesive Transfer Tape 468MP, engineered with a robust 5.2 mil adhesive designed specifically for splicing and laminating operations involving metals and HSE plastics. Its thicker caliper enhances wet-out capability, ensuring reliable adhesion even on surfaces with slight textures or irregularities.
Versatile Applications:
This adhesive tape serves many purposes including a no-cut transfer paper, PEI sheet for 3D printers, 3D printer glue, double-sided Kapton tape, phenolic sheet, double-sided adhesive sheets, and PEI heated bed.
Surface Preparation:
For optimal bonding, ensure that bonding surfaces are thoroughly cleaned and dried before application.
Application Guidelines:
Apply the tape at room temperature or up to 100°F for best results. Firmly press down for about a minute to establish a secure bond. Moderate heat ranging from 100°F to 130°F can aid in developing intimate contact with the bonding surface.
Environmental Conditions:
This tape withstands short-term exposure to temperatures up to 400°F and intermittent longer periods up to 300°F. It shows minimal impact on adhesive performance in high humidity, remaining consistent even after a week at 90°F and 90% relative humidity. Additionally, when properly applied, it maintains secure adhesion against various chemicals, making it perfect for nameplate and decorative trim parts.
Steve Bradley
Reviewed in the United States on January 15, 2025
Sticks really well to all surfaces
Steven V.
Reviewed in the United States on January 15, 2025
If you are looking for double sided tape that will stay, this is your stuff. I had a hard time putting it on my printer's base because the backing was difficult to separate from the tape. Also it took me about 20 minutes of scrubbing with my scraper, soap, and water to try and get this to come off. I am sure this stuff has its purpose, but adhering 3d prints to a base plate is not it.
Customer
Reviewed in the United States on September 10, 2024
Use to attach sticker to inside of car window. The material is thin and will rip if not careful. Tricky to cut as they stick to scissors. Worked well however. 3m products always reliable.
Tim T.
Reviewed in the United States on July 1, 2024
These 10x10 adhesive sheets work as expected. This pack gives you a couple to work with if you have multiple things to work on or have an issue with an install. The double sides work well enough to really stick two things together. Simple bonding stickers.
TripleEight
Reviewed in the United States on December 27, 2024
Worked okay for taking showers with my Zio patch. I would first cover the Zio with paper towel cut to fit, and then apply 2 of these stick on covers. Only wore them for the duration of the showers, but had to do this for each shower for 14 days. Only had one leak and I think I had accidentally torn the sheet. They are very thin, but worked for my application, and were a great price.
D3ADRONIN
Reviewed in the United States on December 24, 2024
Bought this to use with my motorcycles tank pads. These are very sticky and helped mount my tank pads without a problem .
Redstone
Reviewed in the United States on December 22, 2024
Good quality with uniform stickiness so that you can bond most any item to almost any surface. Easy to cut the exact shape needed. Decent value for the money. Recommend highly.
Preston
Reviewed in the United States on December 20, 2024
1. It ships in a soft-sided Amazon bag which means it'll likely arrive warped, bent, or creased. They really should ship it in a thin cardboard box.2. This is more of an EXTREMELY THIN sheet of squishy putty RATHER than a foam pad with adhesive on it. The adhesion is actually pretty good but the putty is easy to deform which can be an issue if you're trying to get adhesive material over a perfectly defined area. On the plus side, it's easy to cut with scissors into the shape you want, and then apply. But you won't be able to remove the adhesive and then reapply it without gathering it into a gloopy putty ball (it won't retain it's shape).3. The sheets are near-paper thin and one side peels off very easily but the other side does not. I suppose this is a testament to the adhesive strength of this product but you've really got to dig in with your fingernails or a knife to separate the adhesive putty from the second sheet.4. Some of the sheets arrived with air-pocket seams. Fortunately, there were 3-4 other sheets that didn't have this issue.
Recommended Products
