Your cart is empty.
Your cart is empty.Camco's Large Battery Hold-Down Tray safely holds group 27 automotive, RV and marine batteries to prevent movement during transportation. The tray will fit batteries up to 12 11/16-inches (L) x 6 ¾-inches (W) x 8 ¾-inches (H). Product measures 13 1/8-inches (L) x 8 ½-inches (W) x 10 3/8-inches (H) and is constructed of heavy-duty, acid-resistant plastic with stainless steel hardware. Includes (1) tray, (2) rods, (1) cross bar and (2) knobs. This product meets U.S. Coast Guard CFR 183.420 and ABYC E-10.7 specifications when used with group 27 batteries. Patented.
Customer
Reviewed in the United States on January 9, 2025
Great product for the price, it could of been a touch smaller to fit my battery size but it's the closest one I could find
RAA
Reviewed in the United States on June 12, 2024
secured battery and battery are easy to remove
Klaritsa De La Cruz
Reviewed in the United States on December 15, 2024
It is easy to install and after 2 years it is still intact.
Alberto Ruiz
Reviewed in Mexico on October 3, 2024
Adquirí el producto con algunas reservas y debo decir que ha superado mis expectativas en todos los aspectos. Desde el momento en que lo recibí, pude notar la calidad y el cuidado en los detalles.Funcionalidad y Rendimiento: El producto funciona de manera impecable. Su rendimiento ha sido constante y eficiente, lo cual es crucial para mis necesidades diarias.Satisfacción: Estoy completamente satisfecho con mi compra. No solo cumple con lo prometido, sino que también ofrece características adicionales que han mejorado mi experiencia.Recomendación: Recomiendo encarecidamente a cualquier persona que esté buscando. Es una inversión que vale la pena y estoy seguro de que no se arrepentirán.Agradecimiento al Vendedor: Quiero agradecer al vendedor por su excelente servicio. El proceso de compra fue sencillo y la entrega rápida. Además, el producto llegó en perfectas condiciones. Sin duda, volveré a comprar con ellos en el futuro si llego a requerirlo.
Tom In GA
Reviewed in the United States on September 8, 2023
This fit my Weize 100ah lithium battery perfectly. The hold-down was a little wide so a small piece of plastic was all that was needed to fil the half inch gap between the side of the battery at the top and the hold down bracket.
Customer
Reviewed in the United States on July 29, 2023
I bought this battery hold down tray for my dump trailer. Its a size 31 battery. This worked out really great!! It fit like a glove, easy to install and its really made well. You can't beat the price, as I have found others to be more exspensive. I would highly recommend this product. Great seller, and very fast ship. With-in 2 days. Thank you so much. M G
Pierre L.
Reviewed in Canada on May 27, 2022
J'ai installé ce support dans mon bateau avec un moteur inboard et c'est super, bon produit et solide. Bon rapport qualité prix et livraison rapide 2 jours.
A. P.
Reviewed in Canada on April 16, 2022
Plastic is relatively sturdy, the plastic wingnuts are also okay. I expected the wingnuts to have a steal nut inside but instead it's looks like a helicoil insert. Which is good for wear or repeated install/uninstall but not strong to hold much force. At least it's not plastic threads haha.Fits okay with Optima SC34U battery even with the battery cover/booster seat on top or bottom. Little too long for this car battery as most batteries are about 10" long and this tray is 13' long so have an extra inch on each side :(
Breanne
Reviewed in Canada on April 10, 2022
Holds a group 31 battery but it’s tight!
Mharlon
Reviewed in Canada on November 13, 2021
9 to 10" on measurememt was perfect for the tray to replace the metal connector with. I only used one black cap since the other was way too big to fit it under the flat black tube that is connected to the A/C in front of the drivers section. I might buy another for future reference.
Customer
Reviewed in the United States on October 23, 2021
I purchased this for a dual battery/converter box I'm building for the bed of my pick/up. The base is sturdy with just enough flex to prevent cracking. It has pre-drilled mounting holes. The L at the bottom of the hold down strut fits into a recess in the bottom of the base which will prevents it from turning when you are tightening up the top hold down bracket which is equally as sturdy as the base. The only modification I'm going to do is screw a piece of metal strip over the L so it can't drop down and spin when you loosen the top hold down fasteners which are also sturdy and require no tools to loosen. Treating all metal surfaces with protection spray to guard against corrosion .
Ann Wilson
Reviewed in the United States on August 5, 2020
I replaced my group 27 boat battery with a group 29. The existing tray was about 1/4" too short, so I ordered this one. Everything about this tray is very good. Installation was easy, the quality is great. it fit the battery base, but then when I went to install the hold down to secure the battery, the rods were about an inch too short and the nice knobs for the hold downs wouldn't thread on. I managed to rig some nuts and washers to get the job done, but would have preferred the nice knobs that came with the tray.
Weathermuffin
Reviewed in the United States on May 23, 2018
Ok item, but didn't work well for me:1. It was too short to accommodate my group 27 battery. The bolts would have needed to be about 1.5 inches taller.2. The plastic bracket that goes over the top requires the top of the battery to be completely flat. My AGM battery has covered vents on top and is not flat. The bracket could not have worked at all, even if the bolts had been long enough.3. The threads on the thumb screws don't start at the bottom, they start about 1/4" up. Which means you need at least 1/4" of bolt thread expose before you can even begin tightening.4. The bolts are a metric size, which in the U.S. makes it slightly more difficult to find nuts that will fit.
Recommended Products
