Your cart is empty.
Your cart is empty.Product Description
Wall-Mount HDMI Display Solution
The Cable Matters 4K HDMI Wall Plate provides a clean and simple way to connect a wall-mounted UHD TV or a ceiling-mounted projector. Conceal the HDMI cable behind the wall instead of fastening it to the baseboard for a secure and professional-looking installation.
Sturdy Construction
This sturdy wall plate is built to last. Painted screws are included with this two-piece wall plate for a professional-looking installation.
Important Notes
- (12.5 ft + 12.5 ft) is the recommended maximum length of HDMI cables for 4K/HDR
- All plate is not interchangeable with a Decora wall plate
Simple Installation
- Connect an HDMI cable to the rear pigtail cable of the insert
- Fasten the insert to the wall plate with the shorter screws
- Fasten the assembled wall plate to the bracket
- Connect an HDMI cable to the front of the wall plate
Standard Wall Plate Compatible
- Compatible with a single-gang box or low-voltage bracket
- Not compatible with a Decora wall plate
4K HDMI Video with Precision Audio
- Video resolution support up to 4K 3840x2160 including 2560x1440, 1920x1200, and HD 1080p
- Master Audio and Dolby TrueHD support
- Supports 48-bit color depth for vibrant video
Cost-Effective 2-Pack
- 2x Wall Plate Inserts
- 2x Single-Gang Wall Plates
- 8x Mounting Screws
Victor Contreras
Reviewed in the United States on February 23, 2025
Worked very well. Didn't had any issues after install.Quality are A+
YuKai Liao
Reviewed in Canada on February 13, 2025
needed one, have the other as spare. works very well and also comes with extra screw for going into wood, which i also needed. very nice surprise and worked well. highly recommended
FORZA ITALIA
Reviewed in the United States on January 12, 2025
TERRIBLE!!!!! Box was opened and damaged, missing screws and plates and only 1 HDMI port was in the box.. And the best is that the product didn't even fit in the box it came in. The box it came in is like 1/2" thick and the HDMI port is like over 1" wide..
Allison D.
Reviewed in the United States on August 20, 2024
Great product for connecting HDMI cables inside a wall. It makes for secure connection and effortless connect-ability.
CCullen
Reviewed in Canada on August 17, 2024
Easy to install and does the job, fells a cheap but has been holding up well.
Arthur Deco
Reviewed in the United States on February 18, 2024
Arrived on time and in good condition. Simple to install and they worked well. Could also be used as an HDMI extender cable. Would recommend.
Peter
Reviewed in the United States on December 24, 2024
It just works!We used this for connecting HDMI inputs to our Teams Room setup. I couldn't be happier with how it turned out.
Bill S.
Reviewed in the United States on October 27, 2024
worked great on our remodel
Ivan Lg
Reviewed in Mexico on April 28, 2024
Talvez lamplacanpodria estra más resistente pero la conexión se ve bien, opero bien, solo falta ver su durabilidad.
Wallace English
Reviewed in Canada on October 15, 2023
Good product
Juan Carlos
Reviewed in Mexico on August 25, 2022
El cable que trae ocupa mucho espacio del registro
Brian
Reviewed in the United States on August 30, 2021
Purchased: Cable Matters 2-Pack 2-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet pass-thru support)Review: Works great, looks great, easy to install. Can't speak to 4k/HDR though as we don't have any 4k/HDR media devices.That being said: most bad reviews I see do not specify what cable or length of cable they are using in-wall, so I'm hesitant to say the plate "wouldn't work" for 4k/60FPS. My very short run ended across a bedroom up needing to utilize 35' of cable which will not support 4k @ 60FPS. I think any CL3 cable you are going to find that says it supports 4k @ 60FPS is going to max out at 25' (and it's risky at that length). With the high bandwidth needed for 4k, you really should be trying to place this devices as close as possible to your TV or projector. Even if you were just going up a wall under a TV I'd expect your entire setup to use about 10' of cable. Most recommendations to get 4k/60fps/HDR will say keep the cable length to under 3-6' max so introducing these plates plus three additional cables between all your devices you are already going over (plus lots of connectors to cause problems).TL;DR: It's all about bandwidth. Longer cables cause losses with reduce how much bandwidth you can use (high-frequency losses). I wouldn't recommend wall plates for 4k @ 60FPS unless you are talking about a very short run in-wall. Verify all of your cables are not something you've had lying around since the XBOX 360 days. Above all: always test your setup out before doing an install.
Jeffrey V.
Reviewed in the United States on June 2, 2020
I installed the first wall plate behind my Onkyo AVR and the second behind my Samsung TU7000 TV. I am using a new NVIDIA Shield TV connected to the AVR then passes through the wall plate into my attic over a 23" HDMI 2.0b cable. Then back down to the second wall plate and into the TV via another HDMI 2.0b cable. I am able to get 24 hz 4k HDR10 out of this setup. Not seeing 60hz 4k HDR10 though. So these may not be HDMI 2.0b. Overall I am very pleased with how they look and the performance.
Recommended Products