Your cart is empty.
Your cart is empty.Product Description
Brushless DC Motor 3000W
Brushless DC motor with low noise, smooth operation, long service life and low maintenance cost.
- The running direction of the motor can be changed by changing the wiring between the motor and the controller (reverse-counterclockwise) :
Step 1: 3 thick yellow, green and blue wires (phase wires) : Controller to the motor - yellow to yellow, blue to green, green to blue;
Step 2: 6 Hall Wires: Controller to the motor - blue to yellow, other unchanged.
HIGH SPEED 4900 - 6700RPM
High-speed Brushless electric motor
Rated speed is 4900r/min, maximum speed of no-load test can reach 6700r/min, fully charged with 50A controller.
The loading speed is affected by other factors, please refer to the actual test results.
POSITIVE & NEGATIVE ROTATION DESIGN
All-aluminum body copper movement, high-quality rotors with 6 pairs of magnets, forward and reverse design of the motor, the motor runs clockwise in the correct direction, and counterclockwise is in reverse.
T8F 11T SPROCKET, AND WITH RADIATING HOLES
Electric brushless DC motor with 8/10mm shaft, with T8F 11 tooth sprocket, suitable for T8F chain, shaft also suitable for 25H sprocket, but must be replaced by yourself.
The mid motor has some cooling holes on the front and back for motor cooling.
High Quality Motor, All copper movement
All copper movement, High quality motor with long service life.
- Sprocket: T8F 11T
- Magnet Poles: 6 pairs / 12 pieces
3000W Electric Motor Kit
High Speed
Kunray's 72V 3000W brushless motor has a rated speed of 4900rpm/min and a maximum speed of 6700rpm/min.
- Rate Voltage: 48 - 72V
- Rate Power: 3000W (4hp)
- Rate Current: 50A
- Rate Speed: 4900rpm/min
- Max Speed: 6700rpm/min
- Torque: 5.4N.m
- Load Weight: about 100 - 150kg (220 - 330lb)
Kunray 3000W Motor Testing Report
Kunray 3000W Motor Test
We will strictly complete the inspection of each motor when it leaves the factory to ensure that there is no problem with the quality.
3 Speed Handlebar & Foot Pedal Throttle
3 Speed handlebar:
low - mid - high speed switch,
forward & reverse switch,
3 functions in 1 throttle.
The cable length is 150cm/59inches.
24MOS 50A 3000W BRUSHLESS CONTROLLER
Brushless Motor Controller 50A,
The controller can be equipped with a 48-72V battery with a rated power of 3000W.
But for the motor, it is recommended that you use a 72V motor, which allows the motor to output full power.
Phase angle: 120°, intelligent controller with hall sensor, electronic brake, three gears (low, medium and high speed), reverse function, indicator light and power lock function .
Mid Motor Applications Wide
The electric motor are suitable for electric scooters, electric bikes, mini motorcycles, dirt bikes, electric karts, bicycles, quads, other DIY projects, etc.
About after-sales service
- When you receive the product, if there are missing parts, please contact the online staff immediately.
- Motor, controller maintenance one year, other parts series is half a year. If there is any problem in use, please feel free to contact our after-sales team, or online staff. We are always at your service.
If you find that the product appears after receiving the product: there are scratches, rust stains, the product has missing parts, there is damage, etc., there are any defects. Please tell us, we will be happy to solve your problem.
Inform: In the process of your return, if we find that the returned product is inconsistent with the received product, we will reserve the responsibility of the buyer!
tim
Reviewed in the United States on March 20, 2024
I used this kit to convert a Razor MX650 to 72 volts. Everything fit with only minor modification. The controller fit nicely where the fake gas tank used to go. Nice kit for the money
andy h.
Reviewed in the United States on December 2, 2024
Built an electric minibike successfully with this kit.
Sabrina M.
Reviewed in the United States on November 16, 2024
Cheep crapppp !! Don’t buy save time and money
Stevie Wonder
Reviewed in the United States on October 14, 2024
This Ebike motor kit is very easy to install andPreforms well. I’d get the heat sink for the motor since it could get hot when using on steep hills.The wiring diagram was very intuitive and easy to follow. It’s geared a bit high so it’s great for speed 50mph + but you should get a lower gear ratio for off road. I had to counter sink 2 of theMotor bolts to make flush for mounting on the Razor MX650.Everything else was very easy to retrofit and worked well.I would recommend this kit for anyone who wants to upgrade their Ebike or MX motorcycle
Zack
Reviewed in the United States on June 29, 2023
Motor and controller work awesome, love it! Well worth the cash
petedacook
Reviewed in the United States on February 15, 2023
I bought this motor for my son's MX650. It almost fit without modification. I had to drill the holes for the screws a bit so the screws would counter sink. It was very easy. This motor is a beast on my son's MX650. I put 1 size larger front sprocket on it. OIt'll do about 60mph.Great little motor, and bundle for the price.One more thing, this seller has other motors. I first looked at one with more feedback on it, but it was for a go-cart type of set up with a mount on it.I asked the seller about a motor for a Razor. They directedd me to this motor so i don;t have to cut the mount off.Very responsive and fast seller.
Jennifer Douglass
Reviewed in the United States on October 15, 2023
The media could not be loaded.
Brian harrison
Reviewed in the United States on October 10, 2023
Great fit! Works amazing.
Recommended Products