Your cart is empty.
Your cart is empty. Package：
1 pc JGB37-520 motor
1 piece mounting bracket
6 pieces M3 screws
4 pieces M3 screws and nuts
2 pcs 4.8mm reed terminal and sheathed female connector
Scope of application：
Parking locks, intelligent carts, medical devices, intelligent equipment, card dispensers, channel gates, vending machines, packaging machinery, sweepers, etc.
Motor precautions：
1. When you use the motor, there should be no binding objects, such as adhesive should not flow into the bearing through the rotating shaft, which will harm the operation of the motor.
2. The manual rotation of the shaft may have the opposite effect on the life of the motor, in order to extend the life of the motor, please check whether your load is in accordance with the regulations, do not overload or hang the end of the shaft with objects that affect the rotation.
3. Heavy eccentric radiation loads are harmful to the life of the motor.
4. Do not store the motor in high temperature or extreme humidity, or in corrosive gas, which will reduce the motor's effectiveness.
5. Do not run the motor in high temperature and humidity.
6. When soldering the motor terminals of positive and negative power supply, the temperature of the soldering iron should be 340°C to 40°C and the heating time should be within 3 seconds.
7. Do not allow the motor shaft to jam, when the power is transferred, the motor will overheat in a short time and burn its accessories.
8. Supply the specified power and be sure that it is within the measurable range. Do not press the pulley or gear into the motor with abnormal weight.
9. When installing the motor, the screws are too long, which may cause contact between the motor itself and the rotor, and may affect the characteristics.
Steamboat Ed Haas
Reviewed in the United States on January 9, 2025
Didn't need the mounting bracket but glad it was included. Has the torque I needed.
NB
Reviewed in the United States on January 8, 2025
I'm using this to raise and lower a chicken door and it works great!
denis duval
Reviewed in Canada on January 14, 2025
excellent petit moteur pour expérience scientifique
Songhai Chai
Reviewed in the United States on January 11, 2025
it works as advertised. I use it in experimentation
Lolo lolo
Reviewed in the United States on February 18, 2024
Out of the box the gearbox’s gears would slide on on the shaft, disengaging each other and not drive anymore unless i held it upright and waited a little for the gears to slide back into place.I fixed it by printing a spacer (Diameter 10mm, Hole 6mm, Height 2mm) that adds the extra space to not allow the gears to slide up and down the shaft anymore.Im guessing mine was just defective but this is what i had to do to fix it. Now that the gearbox is working, the motor itself is good👍
Collector 23
Reviewed in the United States on December 22, 2024
This product worked exactly as expected!
Customer
Reviewed in the United States on December 21, 2024
The motor worked perfectly. 9V batteries lose voltage when delivering this much current. I just put 2 9V batteries in parallel and the motor worked perfectly. Enjoy
Zach screeton
Reviewed in the United States on November 19, 2024
Great as expected
Chris C.
Reviewed in the United States on October 29, 2024
The motor worked well with a speed controller. It has good torque and it worked well on my guitar pick up winding machine project.
Recommended Products
$123.67
$ 57 .99 $57.99