Your cart is empty.
Your cart is empty.Product Description
The motorcycle fork stem ball base consists of a 1'' TPU ball joint, which is attached to an aluminum alloy round plate.
The ball base designed to fit into the cylindrical or hexagonal bore wall of motorcycle fork stems. Suitable for stem tube 12mm to 25.4mm in diameter
The 1'' ball motorcycle fork stem base compatible with RAM MOUNTS any B size double socket arm
ANTI-THEFT DESIGN
The metal fork stem ball base are equipped with special anti-theft screws. The package comes with a special wrench to lock and loosen them. This design adds extra security to your motorcycle cell phone mount.
Kyle
Reviewed in the United States on August 24, 2024
I bought this to upgrade the mount provided for the RAM motorcycle stem phone mount. I used this on a 2023 Cbr 1000rr, and it’s amazing. Very solid, fits perfectly without modification
Dan S.
Reviewed in the United States on August 13, 2024
I was looking for a ball mount to install a CarPlay-connected screen to my bike for GPS directions. I used the major name brand's product in the past and was quite disappointed. It tore the rubber inserts, never tightened down enough to not turn in the stem, and thought it was too expensive for the low quality part.The BRCOVAN stem mount is much higher quality than the other mount. The internals that go into the stem are metal and of decent quality (better than expected from a no-name brand) and tighten down firmly. The ball cannot be spun when it is tight. The ball itself appears to be well manufactured with no rough spots from manufacturing. I believe it's textured to help grip, but doesn't have casting lines from the mold like that other brand tends to have.All in all I am quite satisfied with this product that I felt I could reasonably have expected to return it for quality concerns when I ordered it.
S.V.
Reviewed in Germany on June 4, 2024
Habe für meine betagte VFR 800 so eine Navi Halterung für den Lenkkopf gesucht und gefunden.Innendurchmesser des Schaftrohres ist 19 mm und das Teil passt perfekt und hält einwandfrei.Der Preis von 19,99€ inklusive Versand ist dafür akzeptabel.Wer eine gute variable Lösung sucht, ist hiermit sehr gut bedient.
April
Reviewed in the United States on December 5, 2024
Good product but spendy.
Ryan bartholomew
Reviewed in the United States on November 2, 2024
I've ridden about 200 miles with it so far and it is solid. I paired it with a ram mount short arm and a tackform 25mm vibemax phone mount. works great and next to no movement while riding.
Davide
Reviewed in Italy on October 9, 2024
Installato questo fantastico attacco per forcella moto, non presenta alcun gioco su Kawasaki Ninja 650 2020. Il quadlock su questo modello non rimaneva solido, questo prodotto invece è perfetto, con finiture davvero ben fatte senza sbavi e altro. Consigliatissimo
john sujay
Reviewed in the United Arab Emirates on October 21, 2024
Great
Allan
Reviewed in the United Kingdom on April 5, 2024
Simple but works perfectly. The unit is made of metal and feels very sturdy. Installation was very simple. I've used it to hold an Android Auto Unit and a GoPro and both were very stable.
Aman Ahmed
Reviewed in Canada on April 29, 2024
This product is really amazing and worth the money. Quality is wonderful. Before this product, i tried using the product from the store, it was super bad. This one is amazing.
Dave W.
Reviewed in the United States on September 12, 2023
I have been using the RAM steering stem ball mount for years for GoPro videos on both a 2011 GSX-R750 and a 2003 CBR954RR. It worked fairly well but as was previously mentioned, required every other day (~ 200 miles per day of twisty roads) tightening on my weeklong trips in order to keep the GoPro aimed properly through the windscreen. The plastic cinching washer expanding the rubber collar inside the steering stem had limited friction capability to prevent rotation of the entire mount while operating the GoPro's controls.As already mentioned, installation of this metal sleeve mount was very easy. Once tightened it provided much more resistance to turning than the RAM device. However, installing and testing an i360 X3 demonstrated what appears to be a slight shortcoming. Operating the i360 controls allowed the ball to slightly rotate in its mount. The stem part did not rotate, only the ball itself. Removing the mounting bolt and placing an external #10 star washer below the existing 2 flat washers such that the star washer teeth contact the ball then reinstalling the bolt markedly improved the ball's resistance to torque/rotation.Because the new mount is more robust than the RAM, I hope videos will be smoother and clearer.dwwActual use result:After a few hundred miles of video recording (1100 miles on the bike), stem mount assembly and ball have remained tight. Compared to the thousands of video miles I've recorded with the prior mount, the resultant videos with this mount are the smoothest and clearest I've experienced.
whatscrappening
Reviewed in the United States on June 25, 2023
People were raving about this on the ZX-4 forum, so I bought one.... and it lives up to the hype.I knew how bad the Ram Stem Mount was, so I never planned on using a Stem Mount... but thisBRCOVAN Stem Mount is great (complete opposite of the Ram).I believe my Stem is 22mm and the large adapter worked perfectly, it's tight & secure.Someone here said it's soft metal, but that's actually good, so you don't mar the inside of your Stem Tube.Only the jaws seem to be soft (part that touches stem) where the wedges seem to be hard (part the screw goes into), so I think it's a sound design.It even comes with Spare O-Rings, so you'll be able to transfer this to your next bike, several years down the road.I'd probably prefer a version w/o the Security Screw (so you can mount it with standard tools), since I don't think there's a high probability of theft.
Claudia
Reviewed in the United States on June 19, 2023
I bought this to replace the RAM mount and it is night and day difference. The rubber RAM mount could easily be wiggled out which didn't feel safe and it eventually broke. This mount is super sturdy and easily installed. I was afraid the metal on metal would slide around but that is definitely not the case. Plus, it works well to have the phone in the center and not attached to one of the handle bars. Highly recommend.
Daniel Chang
Reviewed in the United States on April 11, 2023
I bought this thing thinking, "I spent $60+ on that stupid RAM thing and it freely spins around my stem no matter how much I tighten it. This is $20, might as well risk it".The RAM version of this uses a rubber stopper that you expand into the stem with a screw in order to secure it. However, that rubber material does NOT have the rigidity or durability to be used that way.When I received this, I immediately felt it would work much better. Indeed it did, less than two minute install and it's sturdier than the RAM ever felt. If you're worried about the screw backing out over time with vibration, then just put a bit of (removable with hand tools version) threadlocker on it before turning it tight, and it won't ever budge unless you want it to.Fantastic product. 10/10 will continue buying these for all of my bikes.
Recommended Products