Your cart is empty.
Your cart is empty.Product Description
Through 80 years of developing innovative tools and accessories for the concrete professional, BOSCH has become the acknowledged leader in the industry. with a robust line that can address everything from the toughest concrete drilling tasks to material removal, BOSCH is a company whose legacy is written in concrete. If the project requires work in concrete, from polishing and anchoring to material removal, there's only one place to turn for a complete solution. Trust BOSCH to provide the professional-grade tools and accessories to get the job done right. Ideal for large-area material removal of lime, plaster, hard finish plaster, sandstone, and abrasive concrete.. The hard metal binding even resists loads caused by strongly abrasive materials.. Optimal use-asphalt, fresh concrete, pumice stone, screed concrete, aerated concrete, plaster, cast asphalt, soft limestone, and plaster mortar. May be used on-basalt, old concrete, stone concrete pipes, natural limestone, quartzite, and sandstone.
From the Manufacturer
Carbide tipped tongue and groove bits are micrograin bits designed to cut tongue and grooves on 1/2" through 3/4" thick material. To cut the tongue, use the complete assembly; to cut the groove, remove one slotting cutter
jim jones
Reviewed in the United States on January 26, 2024
should come with washers you can't tighten up cutter after you remove top cutter this is not a cheap bit have bought cheaper ones that come with washers for what the bit cost you would think they could afford to give you some washers with this bit
Carlos Uriel Coronado
Reviewed in Mexico on February 9, 2023
Sw nota la calidad, la robustes del vástago le da mucha resistencia y mejor rendimiento a la hora de exigirle más trabajo, el corte es preciso
Gustavo Serna
Reviewed in Mexico on February 22, 2022
La calidad es notoria, llegó dos días antes de la fecha que decía.
John Jacob
Reviewed in Canada on December 3, 2020
Works great. I already have slot cutters so I don't need to take it apart. 1st 1/2" bit, feels more solid than 1/4" shanks.
Sobreviviente 0
Reviewed in the United States on February 26, 2019
Increíble precisión
Customer
Reviewed in the United States on April 22, 2019
Got the job done
Customer
Reviewed in the United States on January 30, 2017
It work great on my project very smooth.
SC Patriot
Reviewed in the United States on July 29, 2016
have to take my son's word for this one - these were a "working gift" to him,while he was building cabinets for me. :)he said this set did exactly what he needed, so i'm giving 'em 5 stars.
Allen Brosco
Reviewed in the United States on February 11, 2016
Having never attempted tongue and grove before, I was really surprised at how well this worked. However, it is apparent that the manufacturer presupposes knowledge of the configuration(s) that can be used and so there is no information regarding how to use (or not use) the shims that are part of the assemblage, leaving one to the trial and error approach. But once determined, the cuts are perfectly made so that a very tight fit is achieved.
Raymond Tremblay
Reviewed in Canada on July 26, 2015
OK
S.V.
Reviewed in Canada on May 2, 2015
Item comes in a pouch with no instructions. You pretty much have to know how to use it or play around with it, risking gashed hands to use it for cutting grooves. However, once setup, it works really well.
Ramadama
Reviewed in the United States on February 3, 2012
I am the owner of a cabinet shop, and was needing a tongue and groove bit to make some Shaker panels for a bar back. was not to sure about this bit as the specs doesn't show the dimensions of the cutting bits. I was working with 3/4 material and needed it to cut in 1/4" incraments. Took a chance, and it worked out just fine. had no problem with the delivery, and it arrived a day earlier than expected. For the money, this was well worth the cost, and it served my needs very well. I would recommend this bit in a minute.
Max Power
Reviewed in the United States on April 10, 2012
Came coated in a gum so teeth wouldn't chip or rust. The teeth are big and can easily be sharpened, probably many times. They're as big as the teeth on a good circular saw blade. The teeth are honed sharp. It buzzes through oak like nothing as long as you have a good 3HP router you can make joints all day. The 1/2 shank keeps the shank from warping in high torque applications. A bit like this creates a lot of resistance.I got one used from Amazon Warehouse once. It arrived with one of the teeth chipped because the gum wasn't covering the entire bit. I returned it with free shipping back and they refunded my money no questions asked.
Recommended Products
