Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #72,557 in Arts, Crafts & Sewing (See Top 100 in Arts, Crafts & Sewing)
- #104 in Paint Making Materials
★ Luminosity: Blue
★ UV Color: Blue
★ Daytime Color: White
★ Particle Size:
When fully charged this top performing premium blue powder will glow at 1200 mcd/m2 after 1 minute, level off to 31 mcd/m2 after 1 hour and will continue to glow dim for up to 10 hours. Blue glow in the dark powder glows longer and brighter than the average glow powders. The only two Techno Glow colors that glows longer and brighter are the Green and Aqua.
>Compatible Mediums
Glow powder can be used with resin, epoxy, paint, glass, nail polish, clay, rubber, cement, ceramic, silicone, glaze or glue. It is not soluble, heavier then water & odorless. It needs a medium firm enough to hold the pigment in place. Glow powder is the basic ingredient for most glow in the dark products used by consumers, businesses, education and government agencies, artists, scientists etc.
>Glow Information
Glow in the dark powder can be charged, and discharged indefinitely, making them very economical to use. It will charge by any UV light from the higher spectrum such as sunlight or a white light bulb and also glows under a black light. Made from Strontium Aluminate doped with rare earth elements Dysprosium and Europium. Europium is the most reactive earth element ever discovered. It can give an astonishing glow time for as long as up to 30 hours, which puts it at the cutting edge of technology.
>Safety Information
Environment friendly, not toxic, hazardous, flammable or radioactive. Contains no soluble heavy metals. Not food safe. We do not test products on any animals.
Techno Glow supplies premium glow in the dark pigment and paint with little to no fading for over 15-20 years. We are your one stop shop to illuminate your life.
^^ Scroll up and grab some glow in the dark powder today!
Thor
Reviewed in the United States on March 25, 2024
Glows good and came with some extra powder and a uv light
Customer
Reviewed in the United States on December 16, 2023
This powder even glows in an incandescent light not just fluorescent or fluorescent or black light works good makes my ruby pop it's got that red tint to the bottom
Mi Girard
Reviewed in Canada on March 30, 2021
Do not glow as much as the usual green but very Nice glowing Blue color.
Traci W.
Reviewed in the United States on July 6, 2020
This stuff is amazing! Super bright glow. Lamps, the sun, uv all charge it. The blue is invisible in the light but glows very brightly when dark. No you don't get a lot, but it takes very little! You will get the same results with a thin layer that you would by using a ton of it. I inlaid it in this deer antler burr I carved. Already bought more in aqua!
BJ
Reviewed in Canada on April 4, 2020
Works great mixed in epoxy for a river edge table
Krugs
Reviewed in the United States on November 9, 2018
I mixed a blue and a green on this project so that's why the picture looks green, the dry pigment looks green, while the blue actually goes on clear when it's by itself. So keep that in mind, if you want something to look clear but glows then blue and purple are good ones since they look fairly clear when they're not mixed with colors that show. The blue and green really come out when its dark and makes this desk actually like a glowing turquoise color which is gorgeous! I really love this product and have multiple colors and I've found I can virtually mix it with any clear medium and it works awesome! I'll have to update with better pics to show how much these really glow!
Chantal
Reviewed in Canada on October 22, 2018
Wow, this stuff glows!
Mandolihn
Reviewed in the United States on July 29, 2017
This glow in the dark powder came extremely quickly, and it glows incredibly bright! I purchased the blue, purple, and pink and am extremely happy with all three! The blue and purple are a cream color in the daylight, while the pink is a hot pink in the daylight. In the dark, they are as the picture shows: Very bright and vibrant, especially when exposed to sunlight. After I come in from outside, just walking through a dimmed hallway, the pieces made with these powders glow brightly. (I mixed them in with clear and transparent casting resins with a glitter pigment)Previous reviews complained about the amount you get, but a little bit goes quite a long way, and for the price, it's well worth it! I would recommend these to anyone.Picture showed is with the Pink
Brycann
Reviewed in the United States on March 3, 2017
really hardly any "glow" at all, and lasts less than one hr, I was looking forward to using this in a resin tabletop that resembles a wave. But after leaving this small packet in different types of light (including sunlight) to see what the amount of retention of phosphorescence this would retain. it did not matter I was bummed. and will not use as it does not work. Maybe a bad batch, ?
Jacob
Reviewed in the United States on August 18, 2016
I added this to some clear figures I made. They glowed very well it was awesome! I added some blue dye to some of the figures as well as this powder and the glow was strong enough to light up the figure despite the dye. The powder did not seem to have any adverse effects on the resin either (such as preventing it from drying or changing the texture or any other negative affects).Good quality stuff and although it doesn't look or sound light much it goes a LONG way. I made over a dozen 5-inch figures and barely put a dent in the amount of this dust while still making the figures glow brightly.
Bee Si
Reviewed in the United States on July 7, 2016
It glows really bright! I got this to experiment with a few things and I'm glad my curiosity is satisfied.It says you can mix with most clear mediums. I tried mixing with varnish, mod podge, acrylic glaze, and a gloss sealer. . I could definitely tell a difference in the glow but it wasn't a huge difference so really, any of them can work.One thing I noticed is that all of them were very gritty. So, the powder doesn't dissolve at all, which, I really wasn't expecting it to and it's not a con, I just think it's an important aspect to plan around. Just don't expect a nice smooth finish if you plan to mix with mediums other than resin.I haven't tried it myself but many people use this in resin casting and it seems to work very well. I have the resin, just not enough powder left to do anything with which brings to really, my only 'con'. . You don't get much at all. The description is very clear on how much you get though so that's not in any way a poor reflection on the seller or product. You get about two table spoons, give or take, worth of powder. So, just plan accordingly for the project you are working on.The glow is excellent and recharges really well. There are a lot of possibilities with the powder as opposed to a glow paint so it's definitely worth the expense. I got some glow paint from Techno Glow to try next and will do a review on that later :) I will also be uploading my pictures of my samples later to show the difference.
Recommended Products
