Shopping Cart

Your cart is empty.

Your cart is empty.

Black Front+Rear Axle Nut Cover Caps for Harley Sportster XL 883 1200 Models

Free shipping on orders over $29.99

$18.98

$ 8 .99 $8.99

In Stock

1.Color:Black


  • 【Fitment】It is aftermarket parts used for Harley 2002-2011 VRSC models (except VRSCF and VRSCR), 2015-later XG, 2008-later XL, 2008-later Dyna, 2007-later Softail (except Springer, FXCW, FXCWC, FLSTNSE, FXSBSE, FXST- Aus, and FXSTD) and 2008-later Touring and Trike models.
  • 【Function】Protect front axle hardware from dirt, moisture, dust and other outer damages.
  • 【Material】High quality aluminum, Conceal front axle hardware for a clean custom look.
  • 【Features】Fade & rust resistant, with hard anodized finish, Fits the front/rear axle, Instruction not included.
  • 【Warranty】XMMT store offer 24 hours customer service and 30 days warranty. If you meet any problem about installation and items, please feel free to contact us.


Features:

Fade & rust resistant, with hard anodized finish

Conceal front axle hardware for a clean custom look

Protect front axle hardware from dirt, moisture, dust and other outer damages

Material: Precision machined from aluminum

Inner hole diameter: Approx. 30mm

Easy Installation.

Fitment:It Is Aftermarket Parts Used for Harley

1200 Custom XL1200C 2011

1200 Nightster XL1200N 2009-2012

Blackline FXS 2011-2013

Custom Vehicle Operations Dyna FXDSE2 2008

Custom Vehicle Operations V Rod VRSCSE 2005

Custom Vehicle Operations V Rod VRSCSE2 2006

CVO Dyna Fat Bob FXDFSE 2009

CVO Fat Bob FXDFSE2 2010

CVO Limited FLHTKSE 2014-2016

CVO Road Glide Custom FLTRXSE 2012

CVO Road Glide Custom FLTRXSE2 2013

CVO Road Glide FLTRSE3 2009

CVO Road Glide Ultra FLTRUSE 2011

CVO Road King FLHRSE4 2008

CVO Road King FLHRSE5 2013

CVO Road King FLHRSE6 2014

CVO Softail Convertible FLSTSE 2010

CVO Softail Convertible FLSTSE2 2011

CVO Softail Convertible FLSTSE3 2012

CVO Street Glide FLHXSE 2010

CVO Street Glide FLHXSE2 2011

CVO Street Glide FLHXSE3 2012

CVO Ultra Classic Electra Glide FLHTCUSE3 2008

CVO Ultra Classic Electra Glide FLHTCUSE4 2009

CVO Ultra Classic FLHTCUSE5 2010

Dyna Fat Bob FXDF 2009

Dyna Low Rider FXDL 2008-2009

Dyna Street Bob FXDB 2009

Dyna Super Glide Custom FXDC 2008-2009

Dyna Super Glide FXD 2008-2009

Dyna Wide Glide FXDWG 2008

Electra Glide Classic FLHTC 2008-2013

Electra Glide Standard FLHT 2008-2009

Electra Glide Ultra Classic FLHTCU 2014-2016

Electra Glide Ultra Classic Low FLHTCUL 2015-2016

Electra Glide Ultra Limited FLHTK 2010-2013


CountryHood
Reviewed in the United States on May 26, 2023
Usually I could care less about writing a review just to say the same stuff 10 other people already said in their review(s), but today that changes. I bought these for my 2008 HD Street Bob as they are advertised to fit my bike in the product description. Ordered them on Sunday and received them Thursday. Package was sealed and undamaged when it arrived. Not being more then a 5min instillation I decided to throw them on real quick before I headed out to meet my Ol Lady for dinner 6.7 miles away. I opened and removed them from their packaging. The package contained four individually wrapped covers and one allen wrench. First thing I noticed was they had white writing on the face of them and were not all black with no writing as advertised (see pic). I wasn't thrilled about it as my bike is completely blacked out, but since I had them in hand I decided I'd use them anyway with the idea to use a black Sharpie and color the letters in later. Second thing I noticed while putting a'lil loc-tight on each set screw was only the front two had double set screws to secure them to the axel or nut. Both the rears only had one set screw to secure them. I thought it was odd that all of them didn't have two set screws to secure them, but shrugged it off. Third thing I noticed while installing the front set was on the axle head side, the cover did not go over the washer. The thickness of the washer pushes the cover out further giving you less room to bite the axle head with the set screws. The rear axle head side is the same way. I used the supplied allen wrench to tighten the set screws. Starting with the front set I did each one the same. I screwed each one snug and then attempted to securely tighten each one down. Snug was the best I got with their supplied allen wrench and very cheap set screws. Each set screw let the wrench round the hole out with very minimal effort. Basically once I hit snug anything more did nothing except round out the set screws and I couldn't tighten or untighten them due to being rounded out so easily. I was now 20mins late to meet for dinner on my 5min install. So I grabbed each one with my hand and tried to pull it off or wiggle it to test the secureness. Surprisingly each seemed well secured for just being snug. Satisfied they were secure I fired up my bike and rode the 6.7 miles to the restaurant we were eating at. I pulled in, parked, got off my bike, looked to make sure all four covers were still on and the front axle head side and rear nut side were both gone. The rear axle head side was loose and just hanging on. I reached down and pulled it off with no resistance. Leaving me with only ONE cover still attached in 6.7 miles of riding. Needless to say I'm very disappointed and completely dissatisfied with this product!! So my loss is your gain if you choose to purchase these. You've been fair warned on all the flaws I encountered. I wouldn't buy them again if I had a do over, but my suggestion if you do use these or any others.. four holes and four quality set screws per cover. Drill, tap and add however many set screws you need to have four points of secure pressure per cover. I'd also check the depth on the axle head side and move your holes towards the head more so it gets a good bite. Maybe check them all just to be safe. I'm not re-ordering these or any others. I'm going to just paint the axle heads and nuts black because paint doesn't just fall off in 6.7 miles!!
Mitch Plemmons
Reviewed in the United States on March 26, 2023
Does not fit as described.
Harbor Lady
Reviewed in the United States on September 8, 2022
As I look through the Product images and the description of this product, I see that there are absolutely no graphics or mention of graphics on these covers. When I receive them they are heavy with graphics around the edges of the product. These are definitely not shown as they are sold incredibly discouraged by this engagement and the lack of transparency from this company.
Derick smarz
Reviewed in the United States on August 17, 2021
Works on my 2009 dyna fxdb
Jose Cumba
Reviewed in the United States on July 26, 2021
Doesn't fit my 97 sportser. Opening are too large.
jason
Reviewed in the United States on June 13, 2021
Great
Jonathan childs
Reviewed in the United States on May 3, 2021
Better Allen keys and probably include tread lock with. But overall a nice product.
Alice
Reviewed in the United Kingdom on October 11, 2021
Really good quality. They look amazing!
Recommended Products

$44.06

$ 19 .99 $19.99

4.3
Select Option