Your cart is empty.
Your cart is empty.4.1 out of 5 stars
- #80,958 in Electronics (See Top 100 in Electronics)
- #43 in Cycling GPS Units
Bostin Blunt
Reviewed in the United States on March 2, 2025
Awesome
Martin P
Reviewed in the United Kingdom on August 25, 2024
I can see how this might be a bit fiddly to get set exactly how you want but that's a feature of the general design rather than this specific model. Take a bit of time fitting, don't over-tighten, and this does a decent job, especially for the price point.
xman42
Reviewed in Germany on August 12, 2024
Die Halterung hält was sie verspricht:- Das Cockpit ist wesentlich aufgeräumter- Der Einbau ist einfach. Wichtig: Bitte mit nur Drehmoment Schlüssel festziehen. (Wie man auf dem Bild sehen kann befindet sich die Nm-Angabe auf dem Lenker bei den Schrauben)- Der Wahoo hält sogar noch stabiler als auf der OriginalhalterungAn die GoPro-Halterung unten werde ich noch ein Vorderlicht befestigen.Daher vergebe ich gerne 5 Sterne.
Mike C
Reviewed in the United States on July 7, 2024
I bought this to replace the original arm for my Wahoo because it slips, this is made of aluminum and bolts to the stem. They provide spacers if needed which was nice. The Wahoo fits perfectly! The only reason I don’t give 5 stars is the adjustable part uses a star nut instead of a regular hex, luckily I had something that fit well enough to tighten. Just know you will need a little star head to tighten!
J. Millard
Reviewed in the United States on March 4, 2024
Using the out-front instead of a bar-mounted computer mount helps clean up the cockpit. The adjustable hinge is a bonus that lets you adjust the angle a bit if your stem isn't parallel to the ground already. I also liked that the underside comes with a GoPro-style mount which works with my existing headlight. Definitely an upgrade from the old way I was doing it.
EAM
Reviewed in the United States on March 12, 2024
I am using this mount to replace a light mount that attaches left of the stem and curves into the center. This KREMORV mount is solid aluminum and everything about it seems to be made with quality. As noted in other reviews, there are no instructions whatsoever included with the mount. But, if you work with anything mechanical, you can figure it all out. My main issue was the gaps in the mount came aligned side-to-side and I needed them front-to-back. You just need a #2 hex wrench to take out the little screws and lift out the top of the mount. Then, use the same #2 to remove the screws underneath, put the top back in at a quarter turn, then put the longer screws back in. You don’t need the shorter screws anymore. The longer ones seem like they might not reach, but they do attach securely. For some reason, you need a #25 Torx to change the angle adjustment instead of a hex wrench.This mount is adjustable in many ways. I find the price to be a bit high, but it is a quality piece of equipment.
Kevin
Reviewed in the United States on March 11, 2024
I like that this Wahoo mount is lightweight and it will adjust to fit your stem, with a wide range of adjustability.It seems like it's made of high quality aluminum and it has a GoPro, or other camera mount, beneath the Wahoo mount.I would recommend this Wahoo mount because it seems durable, it's lightweight, and relatively adjustable.
Mike W.
Reviewed in the United States on February 26, 2024
I'm a huge fan of the KREMORV mounts, they're strong and have excellent function. This mount is no different, what I like about this mount specifically is that you can adjust the mount up and down whereas another one of my KREMORV mounts you cannot. This allows me to get the computer in a much better visible position.I do wish that they provided an option for hardware (I would have preferred all black), however, I have a bunch of extra hardware and just swapped out the portions for all black rather than having the silver and black look. This is purely cosmetic and doesn't really make a huge difference but it is something if you're picky about the overall aesthetic of the mount that you may consider.At the end of the day, this is a solid mount and works fantastic and allows you to hone in the aerodynamics while using an out-front mount.
Chard Reviews
Reviewed in the United States on February 22, 2024
I like having a clean cockpit and like to limit whats attached to my handlebar. Currently, i have a tiny headlight strapped to my handlebar. It works well and i have it there for safety. When i saw this front mount, i was excited to get it. This mount is made of all aluminum construction. It is solid and well made. Install was fairly easy. Remove two bolts and screw on the provided bolts with the spacer. From there, it can be adjusted as needed. I have two comments for improvement on this product;1.) I found that the flat black finish is just OK. Mounted next to my all matte black handlebar and stem, this finish is just off by a bit. it is missing the texture and just some final touches.2.) provide matching bolts/screws. The silver on black stands out and again just short of having the final clean look.Overall, i am glad to have this mount as I am able to move my light on here and (in the future) my bike computer.
Customer
Reviewed in the United States on December 4, 2024
Very nice aluminum mount. Looks like it should be sturdy and easily adjustable.
MC Tom
Reviewed in Germany on December 2, 2024
Scheint mir robust und solide zu sein, um auch am Gravelbike im Gelände Erschütterungen auszuhalten. Wirkt aber an den Montagepunkten etwas klobig, geht aber in Ordnung.
G. Smith
Reviewed in the United Kingdom on October 8, 2024
Having swapped from a Garmin to Wahoo Element, I needed a mount for my bicycle. This one fits the bill. It looks great, was easy to install and is really sturdy. It is easy for me to recommend this item as it ticks all the boxes. 5 out of 5 stars from me!
Tim 😊
Reviewed in the United Kingdom on October 18, 2024
I have quite a heavy light mounted on this bracket, but its solid metal construction holds it well. I needed to undo and rotate the base plate by 90 degrees but that was easily accomplished. The need for a torx driver to adjust the angle is the only minor grumble.
Recommended Products
