Your cart is empty.
Your cart is empty.Product Description
What is in the box?
- BTT Pi V1.2
- Heatsink
- SPI Cable
- WiFi Antenna
- BTT Duck
- BTT Package Box
BIGTREETECH Pi V1.2 Motherbaord Quad-Cord
Support Klipper Firmware for i3/CoreXY 3D Printing Users
- A. Onboard RJ45 Port: Supports 100Mbps wired network and WIFI wireless network, allowing users to flexibly choose the network connection method.
- B. 4 x USB 2.0: Make it easy to connect a wide range of devices, such as keyboards, mouse, USB drivers, cameras...
- C. 40-PIN GPIO: Colored connectors, help users more easily identity and differentiate between the various pins on the board.
- D. Two Power Supply Methods: Supports USB-C 5V power supply and DC12-24V from a 3D printer, making it easy and efficient to power up the board without any extra adapters or power sources.
- E. 3.5mm Audio Jack: An easy and convenient way to connect audio devices to the board.
Efficient and Powerful
CPU uses ALLWINNER H616, Quad-core Cortex-A53 @1.5GHz. Debian Linux compatible and fully customizable to suit your needs.
Same Size as the Raspberry-Pi
A nice alternative for your next Pi project. Creates a wide range of projects, from home automation and robotics to multimedia and gaming.
Rich Connectivity
Its 40-PIN GPIO, 4 USB ports, HDMI, Ethernet, and more ensure that you have all the connections you need to bring your innovative ideas to life.
Reserve Interface for ADXL345
For an accelerometer sensor, to enable Klipper's input shaping for higher precision and accuracy.
Reserve CAN bus Interface
For an external U2C module, enable BTT Pi to communicate with CAN bus protocol devices.
*Note: U2C module sold separately.
Multiple Display Options
Supports 4K UHD HDMI displays at 60fps and low-power OLED/TFT screens via SPI.
*Note: DSI not supported.
Roman M.
Reviewed in Canada on February 6, 2025
Well supported. Using it for OctoPrint
Kal318
Reviewed in Canada on September 15, 2024
It's a good board. But you can not put a toggle switch on the the power input with out blowing the power regulator. Iv gone through 2 of these boards to find that out. Basically do not put a switch between the board and the power supply. This will fry it. A direct connection to the power supply is fine. It just can't handle having dumbed into it. Otherwise it's a very good board to add to your 3D printer.
Hamza Mammadli
Reviewed in the United States on August 9, 2024
You can get 2 of this instead of Raspberry Pi price. I'm using this for my Klipper setup and it's performing excellent. If you are planning to use it with the screen, then get a better power supply. Type-c connection from laptop is not enough if screen is connected. Easy to set up and well documented with instructions. The only issue that I want to mention is heating problem. If you are planning to use it for Klipper and run long 3d print process, better to get some active cooling (included heat sink is not enough)
Jake Rota
Reviewed in the United States on August 2, 2024
Super easy to get klipper hooked up to a custom cartesian printer by usb. Connectivity has been great and the wifi has been solid - no dropped connection with Moonraker so far. 5v fan port which can be specified in klipper alongside the temp sensor for the cb1, extremely simple to get set up. I have not used the adxl or camera function but that'll be next
Caleb
Reviewed in the United States on August 11, 2024
It does run kipper, but it can be janky to setup and I had issues with some of the ones that I ordered.Being able to run it off of the power supply is definitely super nice though. If that is important to you, then you should definitely try this out.
Jean
Reviewed in Canada on March 10, 2024
I had a Lepotato on a Voron Trident, after a lot of tweak ( a LOT ) it worked well but it always seem to randomly loose connection when a print was started, and the webcam stream on the web interface was very slow. This BTT Pi was a joy to setup ! I plugged it in and boom, everything worked 10x better than with the Lepotato, literally ! Wifi is strong and webcam stream always 30 fps at 1080p. Needless to say that I am very happy with my purchase and would recommend it to anyone looking to improve their DIY printer experience :)
Nicolas
Reviewed in Canada on December 4, 2024
I converted my ender 3 pro to a core XY klipper printer using this sbc and it works great. It was also available and cheaper than some raspberry options.Great value.
Dean J Burkholder
Reviewed in Canada on January 4, 2024
Got my ender 3v2 neo converted over to klipper. At least doubled the speed without even really tweaking anything
HDC
Reviewed in the United States on September 22, 2023
I love the fact that it can be powered by 24v directly from the 3d printer power supply. The PWM fan header works great. The github OS image works perfectly. I would not hesitate to recommend this to anyone looking for a pi 3b alternative.
Node
Reviewed in the United States on August 11, 2023
UPDATE: The bad screw terminals are a common issue with these boards direct from BTT so it’s not really the sellers fault. However, sending used products as new could definitely be. Because I had two boards on hand I decided to just swap terminals and repair one of them so I had something that worked.Original Review:First board I received had a defective screw terminal on the HE output so I order a replacement through Amazon. I receive the board and unbox it only to find mysterious deformations on one of the HE terminal screws as if it was stuck and someone was trying to screw it in only to mangle the screw. I tell myself “it couldn’t be. Was I sent a used replacement from someone else that had had the same issue as me?”. I grab my screwdriver and with great reluctance attempt to screw the screw all the way in. No dice. It’s stuck. See the attached picture to make clear what I’m referring to. This is the same screw that was stuck on the board I was trying to replace. It doesn’t go down far enough to clamp onto a ferrule. All the others screw down fine.So not only does this seller send defective parts. They send used defective parts labeled as new. Don’t buy from them.
Aaron Brown
Reviewed in the United States on December 19, 2023
Why is 1gb of ram running 64 bit architecture? Installing windows 10 requires a minimum of 2gb for 64 bit, 1 gb for 32, but the minimum is still probably not enough.
Dave B.
Reviewed in the United States on October 2, 2023
This board is hands down the best. I'm hoping they drop a next gen I'll be purchasing it immediately. This was the most user friendly installation of any pi board I've ever used. Setting up klipper screen in seconds. Webcam in seconds. It is lightning fast for my project and runs super cold compared to other Pi boards. Plus I can power it directly off my printer power supply. The wifi is really good and super simple to setup. And tons of ports to choose from. Id take this over my raspberry pi 3b any day for 3d printing. Love BTT literally the best 3d printing hardware store going.
Fusiondew
Reviewed in the United States on October 17, 2023
Fantastic for 3D printing. Easy to set up. BTT’s CB1 GitHub has an OS with a whole Klipper environment, (mainsail, moonraker, and some other things) all set up and ready to go the second you put the flashed SD in. Made my first Klipper printer very easy to set up. Also has a slot for an SPI screen, as well as an accelerometer, and comes with cables for both. I prefer this over a raspberry pi for 3D printers now.And of course, rubber ducky is included.Always love BTT’s stuff!
Recommended Products