Your cart is empty.
Your cart is empty.When lowering your truck or SUV, many things on your vehicle can change and be put out of their operating range, causing unwanted issues such as: Incorrect Wheel Alignment, Increased tire wear, Driveline Shudders/Vibrations etc. Not to worry, Belltech has you covered with its line of Front End, Driveline Alignment Kits & Pinion shims. Front End Alignment kits: Belltech alignment kits provide you the solution for all of your alignment needs. A typical Belltech front end alignment kit will consist of new eccentrics for the upper control arms which provide increased range of adjustment (typically up to 2 degrees) above and beyond what is offered from the factory. Driveline Alignment Kits, Driveshaft Spacer - Universal Pinion Shims - Center Carrier Bearing Kit. If more adjustment for proper rear driveline angle is required, then our Driveline Alignment Kits are your solution.
dennis white
Reviewed in the United States on March 27, 2024
The factory bolts did not fit through bushings! I had to drill them out! The bushing slid in the an arms did not have to press in! So I welded them in. I had no choice but to use them for now, so I need to find new an arms and better bushings.
richard l.
Reviewed in the United States on February 16, 2024
The bushings worked out great but the tool that came with it was not real good quality. Tool that pressed bushings in keeped belling out of shape. Had to straighten it several times too soft or not fight size or both.
Will W
Reviewed in the United States on November 24, 2024
Exactly what I needed for 2005 tahoe. I lowered the front with 3 inch drop keys and needed one more degree to get the caster to zero. Would buy again
Ricardo
Reviewed in the United States on September 20, 2023
Me a funcionado para dar solucion a problemas de camber y caster ( con camionetas con lower.kit o salvage
Nathan D.
Reviewed in the United States on March 1, 2022
Needed 1.5° after installing a lift and the product worked perfect! It's about a year later and the rubber is starting to fall out of the kit. Unless it's been upgraded I'll probably go a different route on my next purchase. They also keep moving when you hit bumps. Perfect purchase for the money, however!
E. Heintz
Reviewed in the United States on November 24, 2021
I bought a cheaper set of offset bushings for my lowered 2010 Tahoe and they didn't last two years. I bought this Belltech set and it definitely seems to be better quality. Installation was pretty straightforward, and the included tools helped with installation, but you will definitely want to have a small hydraulic shop press (I used a Harbor Freight unit) and a ball joint press tool (I rented from AutoZone). Everything went together well using the supplied instructions, and I was able to get perfect alignment with my 2/4" drop without even elongating the slots on the upper control arm mounts. The bushings are firm and quiet, and hopefully I'll get more than 2 years out of them. So far, so good!
D
Reviewed in the United States on December 8, 2020
Awesome bushing kit. Worked great. Installed on a 2019 Chevy Express van that is lowered. Bushings are the same, even though Amazon doesn't think that they fit. I used a balljoint c-clamp removal tool to remove the original bushings, and install these. I used 2 of the 3 included tools.Installation of the bushings was a breeze. Trying to die grind out the control arm bolt mounting alots was a different story. MAKE SURE you have a few rotary file bits, or carbide bits, because in order to get the most out of these bushings, you need to elongate the upper control arm bolt slots in the frame.
Josh chambers
Reviewed in the United States on November 9, 2020
Added this kit to my Silverado because after lowering didn’t have enough adjustment to get a alignment.
Recommended Products
$99.99
$ 44 .99 $44.99
$30.44
$ 15 .99 $15.99