Your cart is empty.
Your cart is empty.4.3 out of 5 stars
- #14,942 in Musical Instruments (See Top 100 in Musical Instruments)
- #70 in Computer Recording MIDI Controllers
Product description
The Behringer MIDI Foot Controller FCB1010 delivers a ton of flexibility in a road-tough package. Feel the emotive power of two expression pedals with freely assignable MIDI channel, controller number and range; ten banks of presets (each with ten fully user-editable presets); simultaneous transmission of 5 MIDI program change commands and two MIDI controllers per preset; and more. Everything's right underfoot and can be effortlessly programmed while standing. Get the most out of your gear without tying up your hands or bogging your performance down - with the Behringer MIDI Foot Controller FCB1010. Behringer MIDI Foot Controller FCB1010 at a Glance: Killer flexibility Easily programmed while standing High quality components and rugged construction Killer flexibility The Behringer MIDI Foot Controller FCB1010 gives you killer flexibility. In addition to the two onboard expression pedals, you get two relay-controlled programmable switch jacks that allow you to, for instance, select channels on a
Amazon.com
No matter what you play, or even if you're an engineer with a MIDI arsenal, you'll appreciate the way our FCB1010 helps you get the most out of your gear without tying up your hands or slowing down your performance. On top of its impressive MIDI functions, it gives you two jacks for analog switching and rugged, road-proof construction.
Professional and Ultra-Flexible MIDI Foot Controller
Two fully user-programmable expression pedals.
MIDI in and out/through, two analog switch connections for guitar amps/etc.
Something for Everyone
The Behringer MIDI FOOT CONTROLLER FCB1010 is an ultra-flexible controller unit for a wide range of applications, whether you are a guitarist, keyboard player or studio engineer. The easy-to-use programming interface gives you fun instead of frustration, and invites you to fully exploit the capabilities of your MIDI equipment.
MIDI Controls Galore
The FCB1010 offers 10 banks with 10 fully user-editable presets, customized for Behringer guitar amplifiers but programmable to your needs. Two fully user-programmable expression pedals will give you enough flexibility to manage your MIDI equipment, with freely assignable MIDI Channel, Controller number and range.
With this pedal, you'll get simultaneous transmission of five MIDI Program Change commands and two MIDI Controllers per preset. You can also send MIDI Note commands for trigger and tap-tempo applications.
Guitarist-Friendly
Guitar players will particularly appreciate the option of selecting channels using two programmable analog switches, as they allow you to fully control both amplifier and effects from one "switching center." Perfect for selecting channels on guitar amps, etc. Additionally, there's no need to take a seat--everything can be easily programmed while standing.
Built to Last
With its ultra-rugged enclosure and built-in power supply, the FCB1010 is absolutely ready for the road, too.
What's in the Box
Behringer FCB1010 MIDI Foot Controller, User's Manual, Power Cable
Jared
Reviewed in the United States on January 25, 2025
I tried to save a few dollars by purchasing a used fcb1010 and regretted it. Something was obviously broken inside the case of the unit (could hear something that sounded like a tic tac rolling around inside it) and there was a missing screw on the back panel. Indicators that someone had opened it up and messed around with the hardware. Needless to say, the controller didn't work at all. Not sure how something like this was sold to me, but GearNuts made it right! The refund/return process was quick and easy, and I decided to take another chance by ordering a new (non-used) fcb1010. I'm so glad I did! This midi controller works flawlessly! I'm very happy with the new unit!
maybell granizo
Reviewed in Belgium on December 5, 2024
Je recommande!
Jose
Reviewed in Mexico on September 27, 2023
La estoy ocupando con un tecladokorg oa700 y esta genial, ahora los cambios de fills los hago con el pie y no me distraigoaltocar en vivo. Genial
R. Grant
Reviewed in Australia on December 7, 2023
Box arrived very rough with clear puncture holes. The foam support structure was also damaged. Not standard amazon. The item was clear for all to see with my details added to the packaging and it was not kept within a non descript Amazon box.DOA inside. Will never buy from Amazon JP again. Always pay attention when ordering to make sure items are arriving from your country to avoid this nonsense.The power cable (jug plug) is for a foreign market. Not for Oceania / Australia. So now I need to get a special cable just to make it work. Shouldn't have been listed on Amazon AU or Prime Australia.
Customer
Reviewed in Canada on January 12, 2018
Good product,built well.I bought this to plug into my Chauvet Obey 70 to run my stage light show hands free.A little tricky programing at first but after that was done it works fantastic. I read its alot easier to program with a PC.
G
Reviewed in the United States on April 8, 2017
Running iFCB with Mainstage.At first I found it a really clunky to program, but then I did some googling and got the iFCB software, which made programming 1000x better/quicker/easier. That said, it still takes some effort to program and isn't going to be plug and play with almost anything. I don't like that it sends MIDI program changes (instead of control changes) by default, which is why many MIDI noobs will hate it, and another reason I got iFCB. It takes work to program it the way you like it, just like any other midi controller, and it works great as a guitar effects controller without the stompbox chip mods (unless you really want the lights to toggle). Once I got it programmed in iFCB to control parameters that make sense and dont conflict with my other devices, it went into a Mainstage show, it has been super stable and consistent. The overall build quality is much better than I expected from a Behringer product. I feel like the expression pedals are pretty flimsy feeling and I don't like that I have to hit a switch to activate effects, instead of there being a click switch on the top like a wah pedal. All-in-all, this thing is a great bargain and I would recommend it.
JSB
Reviewed in the United States on September 4, 2015
I had read the reviews and knew what I was getting in to when I purchased this controller: it was going to be a crash course in MIDI programming and difficult for a beginner. Also, that this board is inexpensive, comparably, for all of the features you get.What I didn't know is that the stock firmware works just fine for my application, which is Ableton Live 9 and multiple guitar VST's. I ordered this board here, on 8-31-2015, I received the new model with stock FCB1010 Firmware version 2.5.1e, as confirmed by the free PC utility, FCBEditor.I spent a lot of time looking at the UnO and Eureka eproms. I may still get one of those at some point but, for now I've been able to get Guitar Rig 5 and Overloud TH2 working perfectly, with stock FCB firmware, Ableton Live 9 and with a Scarlett Focusrite 6i6 controller.Here is a must have utility for PC users: this free utility will allow you to program your FCB1010 without all of the pedal pushing on the board itself:http://host.mtnsys.com:81/faq-fcb/PCEditorBeta.htm - If that link is not working, search for - PC Editor FCB1010. It is pointless to try and program the FCB1010 from the pedals, when this utility gets it done much easier and faster. I use this with Windows 7 x64 and can't speak for other OS's.It's good to have two MIDI cables, in/out, for programming. Buy two if you have none, as the FCB1010 doesn't come with any.If you can't get the FCB1010 working with your VST's in Ableton:1. Insert a blank MIDI track2. Set the input of the MIDI track to the MIDI receiver for your FCB1010 - in my case Scarlett Focusrite 6i63. Set the output of the MIDI track to the separate audio track that contains the guitar VST you want to pass MIDI control to - in my case Guitar Rig 54. Set the MIDI track to IN - not Auto or OFF5. Make sure the track that contains your VST audio track is armed/record lit up on track - Guitar Rig 5 track, record button lit6. Tap dance your way through 100 amps - 10 banks*10 presetsThere are multiple youtube videos that will help you figure out assigning the expression pedals.CC# 7 for volume and CC#11 for wah is pretty standard.I'm not going to say this was an easy task, it took me 15+ hours to get things right, mostly because of old and outdated info and software out there on the web, but this was a very rewarding experience. I learned a lot that can be applied in many different ways.There are also a lot of useful mods out there, like powering the FCB1010 over the same MIDI cable, so you can have just one cable running to this board. And some more:https://www.youtube.com/watch?v=8m0v3Rr6f4UIf you like a challenge and the satisfaction of being able to control any part of your VST's or DAW with your feet, you need the FCB1010.
ニコ
Reviewed in Japan on March 31, 2013
デフォルトだと、ストンプボックスモードのようなものがない。つまり、エフェクトのON/OFFのような設定ができない（限定的にできる様子ですが）。海外でUnOチップというのが販売されており、コレを組み込むとかなり高機能になります＾＾
R. Gomez
Reviewed in the United States on October 3, 2010
There are no viable alternatives for a foot controller at or near this price point with the flexibility that this thing has.Yes, it can be fairly challenging to program, but I spent a couple days simply researching online how others are using it with Ableton Live, and now the programming is not only easy, but fairly intuitive. I am controlling all aspects of Ableton Live (arming of tracks, navigating the session view, launching and stopping clips and scenes, etc.) completely hands free. As a guitar player, this is an essential piece of gear to truly get the most out of the app.The previous reviewer who stated that it's useless for Ableton simply didn't understand how to program it to work with the software. What he was looking to do is easily done by configuring the pedal to send midi note information instead of CC messages. These behave exactly as he needed, allowing you to toggle anything on and off at will. Also, no need at all to get the 3rd party firmware (UNO) upgrade. Everything I'm doing with Ableton, I'm doing with the stock firmware. I have ordered the UNO firmware only because I want to experiment with some of its features, but it's NOT needed to control Ableton at all.Build quality is very good. Expression pedals are a bit flimsy feeling, but all else seems solidly put together.5 stars if the expression pedals were a bit nicer, but at this price it's a no-brainer. There's nothing else out there that gives you this much control.
Recommended Products
