Your cart is empty.
Your cart is empty.The amazing PMP4000 Powered Mixer packs tremendous power (2 x 800 Watts stereo or 1,600 Watts in Bridged mode), while maintaining an incredible power-to-weight ratio. These mixers employ high-efficiency Class-D technology and a state-of-the- art switch-mode power supply, which significantly reduces weight and heat. The 16-channel PMP4000 features 8 built-in, studio-grade XENYX mic preamps, 4 stereo channels, a 24-bit Multi-FX processor with 100 awesome presets including studio-class reverbs, delays, pitch shifter and various multi-effects, plus a 7-band stereo graphic EQ with our proprietary FBQ Feedback Detection System – for the ultimate in feedback-free performance. -Ultra-compact 2 x 800-Watt stereo powered mixer (1600-Watt bridged mode) -Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight -Ultra-compact design at nearly half the weight of conventional powered mixers -16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output -Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects -Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal -8 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphones -Effective, extremely musical 3-band EQ, switchable Low cut filter, and Clip LEDs on all mono channels -Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs -Voice Canceller function removes singer’s voice from recordings for karaoke applications -Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode -Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image -Adjustable stereo CD/Tape input for connecting external signal sources -Multi-functional stereo Preamp outputs for added flexibility -Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
Pepe Kuri
Reviewed in Mexico on February 21, 2025
Grán consola, buena potencia y buena calidad de sonido. Sustituyó una Yamaha y prácticamente no se nota la diferencia. Es un grán producto y sí lo recomiendo.
Dennis Evers G
Reviewed in the United States on July 24, 2024
I matched my Europower PMP4000 to a pair of PV215 15"x2 loudspeakers and sound is awesome, would be good it has USB pc connection for giggers like me...to go live...would be terrific!!
Abraham Ibarra
Reviewed in Mexico on March 7, 2024
Muy fácil de utilizar, intuitiva, entrega una muy buena calidad de sonido.
Chris
Reviewed in the United States on October 17, 2023
This is a great powered mixer and exactly what I needed for a steal of a price. I'm in a local cover band and use it in my home studio to practice with the band and will eventually use it out to run sound and power monitors.Tip: I saw some reviews saying they didn't like that it doesn't have track by track outputs. This isn't totally true. When I'm at home we record track by track from the mixer into my computer setup. The mixer has Insert I/O ports for every track. If you put a 1/4 inch TS cable into that port to only the first click (not all the way in) you will get a line out of the source. I take that line out and run them into my computer audio device (see pics). The output won't have any effects from the mixer but I like it better that way cause then i can really craft the sound on the recording software.I took off one star as it seems under powered. Theoretically I should be able to run two large passive speakers with this mixer to play a decent sized gig. From what I've played around with it doesn't have enough power for that. We're gonna use the mixer to run a couple sets of monitors which should be enough power. Also, in the dual mono output mode, we'll be able to have one monitor set playing the main output and another playing a custom output in case the vocals want to hear themselves higher in the mix which is a nice option. We'll have to get some powered mains to run off the main preamp output but with those, our passive monitors and this mixer we got a full rig for a low price.Sound is good. I'm not getting any noise when its turned up and everything sounds very clear. Haven't really tried the surround option in a live setting but that could be really neat. Hoping the reliability is good but we'll see.The effects on here are okay but our vocals have their own processors so they won't get used much. If you want to run a dedicated sub channel or will use a lot of mixer effects and want the option to run effects combos on each track then look at the PMP6000.
Tom Emmerich
Reviewed in the United States on December 28, 2021
i do parties and weddings . i used to use portable pa systems for this . after my last one went out after one use . i broke down and got this mixer . the absolute best investment . it does have a handle on it . i bought a carry case for it too just for extra protection . sound is amazing . im running 4ohm rockville 12s on it with satellites , mics , etc . i will never use anything else but this mixer
Timothy Prakash
Reviewed in India on January 26, 2021
The Product as such is good but Amazon was unable to help after 14 days. I took a total of 16 days to install as there were holidays(Pongal). The MCB was tripping and there is body short despite having a robust earthing. I was told to call a non functioning number belonging to the seller. Only a miracle can save us now.
Roger C Garratt
Reviewed in the United Kingdom on March 18, 2017
Does what it says on the tin. Have used it with my band (5 piece 60's and 70's covers) on several occasions coupled with Behringer Speakers. Clear, crisp and plenty loud enough for the clubs, pubs and hotels we regularly play in. Easy to transport - a lot lighter that our previous mixer/amp.
Mymondi
Reviewed in Canada on September 2, 2016
So far so good. Lots of channels and plenty of power for home. I am using this with 12 inch Behringer speakers. I found a manual pdf online that seems to be a little more helpful than the one that came with the mixer.
Wayne Kamanaoio Santos
Reviewed in the United States on February 18, 2014
Awesome board with many features. I'm running this to utilize with bands and party music. My setup is:1. MAIN L/R passive output to behringer equalizer then to iNUKE-6000 power amp and then to 2 JBL PRX 415's as my mains.2. MON 2 send passive output to CROWN xti-II 4002 power amp bridge sub mode and then to 2 JBL PRX 418's (Allows me to isolate my low end to just IPOD music, KICK MIC, and KEYBOARDS3. Powered output is switched to MON 1(A)-MONO (B). (A) output is used to run monitors by linking speakers (Board equalizer can be used for either mains or mon1, I switch it to MON1 and use it to EQ my monitors). MONO (B) is currently not used but could be used to isolate another out going speaker or to a speaker in another VIP room.4. I bought audio technica headphones and it came with a 1/4" jack adapter for the board insert. PFL buttons for every channel allow the person running the board to isolate different signals.5. FX effects are awesome and able to be sent to both MAIN signals and both MON 1 & MON 2. The voice pitch effects are perfect for haunted houses and crazy voices. Im going to totally do a haunted house this coming Halloween 2014.Only suggestion would be to buy the PMP6000 board because it is not that much more in cost and weight but allows for two FX channels and and more input/output jacks.
Perry Roper
Reviewed in the United States on October 25, 2013
I purchased this amp on Aug 2012 and started using it the next day it arrived. It has been nothing but trouble since I got it because of its poorly designed construction. I even said it was "possessed" because you would be on stage and the volume would adjust itself. You could connect all the speakers like they were supposed to be, everything would be working properly. Cut it off and come back 15 minutes later and the right side wouldn't work or the left. I have had to connect speakers in all different kind of ways until I ran out of options. I even spoke to a Behringer authorized service person today and his suggestion was the next time I go to the trash dump, carry it with me. He said Behringer didn't give a damn and I would get no response from them even though the amplifier is just over a year old. He said they had no parts for them and that the connections inside were of poor quality and that's the reason it wouldn't work. He has since quit servicing Behringer. Also it was made in China. So I will do as the service rep told me unless Amazon or Behringer wants to make it right. I look forward to hearing from either one. Totally dissatisfied is not the words.
Scubakrum
Reviewed in the United States on January 28, 2013
I am not used to using a mixer with the number of features that this mixer has-that said, once I used it for awhile, I really have been impressed with its operation. I am running two of Behringers' 12 inch powered speakers. The system has great power and quality of sound. Of course there are many systems that are better than this, but for the money and what I us it for it is great.
Dogbreath
Reviewed in the United States on November 26, 2012
I just needed a small powered mixer for some live jams I was doing and this fit the bill perfectly.At about 400 watts at 8 ohms (I believe), this did fine pushing 4 vocals, kick drum and occasional bass guitar. Granted, that's not very much in terms of what kind of load I was pushing but it didn't even break a sweat.The "karaoke" thing is ok. It sounds like it just adds reverb to the main track to push it back in the mix. But for what it is, it does it well.
Recommended Products
$132.99
$ 56 .99 $56.99