For those of you who rated one star on this product, you either dont know how to work an airsoft gun, didnt know this was an airsoft gun, or got a bad product.I rated five stars because this gun is insane, one of the best guns ive gotten. Not only is it insanely accurate for a hipfired weapon, it also came with a speed loader that is compatible with the mag.Pros:★Amazing hipfire accuracy★comes with a quality sling and speed loader★comes with two refills for the speed loader★is a very powerful gun, and I would be careful firing point blank. (The bullets can break in half {as they have done before} and the shrapnel can harm you, or immensely harm the target)Cons:★VERY low mag capacity★Only the barrel is metal, but thats ok because it is still a quality gun.And before you buy this gun, keep in mind it is an AIRSOFT gun. It is not an actual gun, and it is not a BB gun. This gun would be a great primary, and if you are an experienced airsoft player you would love this gun. I also suggest using .20 for this gun (I would also suggest .20 for every gun, but that's just my opinion.)

Well i purchased the Gun last year and had a lot of Fun with it. The Look, the Material and the Size made it to one of my Favorite Airsoft Guns. Clearly a 5 Star Item. Then today, i had the Shotgun on a Shelf, about 6 Feet high, it fell down on the Carpet. I didn't expect any Damage, cause of the very sturdy Look and feeling. Once i picked it up, i saw that the Barrel was broken off. The Fall was not hard and as i said a soft Carpet is on the Floor. Very disappointed! Its in the Trash now. I give 3 Stars for the Fun i had with it.

This is by far my favorite airsoft gun. The details are as follows: FPS: incredible fps, but it is more like 320-350 when used with a .20 gram bb. Accuracy: This thing may as well be an airsoft sniper rifle. I was consistently and easily hitting a 2 inch wide board with it from 50 feet away. Power: This gun can shoot clean through a soda can and leave giant red welts on your skin. If that is not powerful no springer is. Magazine capacity: This is the one and only downfall to the gun. First of all, the magazine is hard to reload into the gun. The magazine holds a pathetic 14 rounds at maximum, so you have to reload all the time on the battlefield. Sights: This shotgun has no sights. To aim, look down the top of the barrel and point at your target. Grip/Cocking: The pistol grip is a nice feature to the gun. The gun is easy to cock despite the high fps. NOTE: when cocking, push upward as you cock the gun. another review i read said the barrel broke in half. push up and in while cocking to prevent this. Price: I purchased this gun for 22 dollars with free shipping from amazon. I would be willing to pay more for it, up to 40 dollars. Hop up: Yes. The hop up is adjustable. Overall gun: looks and feels awesome. This gun has metal heat guards on it to make it look more authentic. would be a great movie prop. The sling is nice and the speed loader is a must for the tiny magazine. That's pretty much it, The gun is accurate and extremely powerful. I would definitely buy it again. NOTE: for an excellent airsoft mask, buy the gen x global air mask from amazon. Thats it on the gun But- READ ON FOR A MAGAZINE MODIFICATION TUTORIAL I modified my magazine because it was just too small and cumbersome during a war. To turn the crappy low cap magazine into a high cap one (several hundred!), use the following materials: The crappy m58b magazine A high cap magazine PLASTIC (you can get a cheap aeg mag for about 8 dollars) A drill and drill bits A cheap ballpoint pen body (remove the inside until you have just the tube) hot glue A screwdriver to disassemble the magazine A vise is handy for the project A sharp knife is also handy to carve out a hole and clean up plastic shavings Scotch tape Super glue for the final attachment THE PROCEDUREFirst and foremost, use a white sheet to put on your workspace to keep track of small pieces. This will save you the hassle of looking for a tiny spring that has fallen on the carpet. Also, read the entire tutorial first before you do anything to see if you are up the the mechanical challenge. It is better to have a 14 round magazine than a worthlessly messed up one. Be sure to check airsoft arenas like sogo airsoft, cqb city, and milsim companies to see if they allow modified guns on the battlefield. I have not checked yet. The whole idea here is to make the m58b magazine an adapter for the high cap.The bbs will flow from the high cap up through the m58b magazine and into the gun. First, take apart the m58b magazine. Look at the internals to get an idea of what you are working with. Next, Remove the bb stopping mechanism on the aeg magazine (this means drill out the top of the magazine so the bbs come out freely when you let go of the spring, but be careful not to let the spring shoot out) Remove all of the pieces from the m58b magazine. the only piece you care about is the small square with the hole in it and the two springs on it. This is the bb release mechanism. keep track of it. Don't worry about the other pieces of the m58b. After that, put the two m58b pieces back together and put them in the vise Drill a hole in line with the hole where the bbs come out of the magazine. Drill from the bottom until you break through the curved bb channel on the inside of the magazine. Be careful not do drill/damage the bb release on the m58b magazine. Once you have a good sized hole that a bb can fall all the way to the bb stop on the top of the magazine, take your pen tube and cut about a 1/4 in piece. put this piece in the hole you drilled from the bottom up in the m58b magazine. it should bypass the old bb channel and be snug and flush with the bottom of the magazine. the top of the piece should end just after the curve has ended so that no bbs can go back into the old bb channel. After it is all said and done, you should have a pen tube that the bbs can flow through bypassing the rest of the m58 magazine. it should end close to but not at the bb release. Now Take the high cap magazine and position it so that the bb release is aligned with the hole/pen tube tunnel in the bottom of the m58b magazine. the bbs should flow out of the high cap, through the short tube and be stopped by the m58b bb release at the top of the magazine. If they do, temporarily tape the two magazines together like this. If the spring on the high cap pushes its bbs up through the m58b mag without any problem, that is good. make sure the bbs come out when you push on the side of the small bb release on the m58b. this will align the hole on the mag release and release the bbs. Now, if you did all that correctly, YOU ROCK! Super glue the two magazines together. Now the high cap magazine flows through the m58b magazine and into the gun. The final result is a high cap magazine using the m58b magazine to clip into the gun. NOW GO KICK SOME BUTT WITH THAT EPIC SHOTGUN AND YOUR SUPER EPIC HIGH CAP MAGAZINE! Thanks for reading that reallllllllllly long review and i hope it helped. PS. this review was done by John's son. It is just over 1000 words and it took me a good hour. XD

This gun is amazing. It's extremely powerful and easy to pump if you are buying it for someone who has trouble cocking airsoft guns. It has next to no iron sights, just little grooves down the barrel, but they're still helpful for aiming. The gun itself is more like 425 FPS. The adjustable Hop-up is great for adjusting the accuracy of the gun. The sling is helpful for obvious reasons, and the speedloader is a godsend. You'd have a lot of time and trouble loading the gun's magazine if they didn't give you a speed loader. Pros: Great Accuracy. Extremely powerful Easy to pump Great price Cons: Small magazine size. (since it's a shotgun, you shouldn't expect a huge mag capacity, though) Overall, definately the best shotgun I've ever used. I would definately recommend to any airsofter, experienced or noob.

i wanted to get a shotgun because i cant afford aeg so i thought this would be fun. when i got it i looked down the gun and it was like bent or uneven. after i used it alittle it seems to have straightend out but the barrel still wobbles alittle. but for 25 bucks it is a great gun... shoots fine and u can easily destroy a soda can with it. it has a nice feature that if you hold down the trigger and pump it it will keep firing as fast as you can pump. another problem with this gun is that the mag only holds 14 rounds and it is a pain to get in. if you use a speed loader you sometimes have to take a bb out to get it to fit and you have to wack it hard to get it in. but again for the price i cant complain. it is worth it.