Your cart is empty.
Your cart is empty.Product Description
T5 Series 4FT
T5 Series LED Shop Lights
| | 6500K | |
| | Linkable | |
| | Accessories included | |
4FT | Dimensions | 4FT |
20W | Wattage | 20W |
8 | Max connect number | 8 |
8 Packs | Quantity | 6 Packs |
| | 6500K | |
| | Linkable | |
| | Accessories included | |
4FT | Dimensions | 4FT |
20W | Wattage | 20W |
8 | Max connect number | 8 |
8 Packs | Quantity | 12 Packs |
| | 6500K | |
| | Linkable | |
| | Accessories included | |
4FT | Dimensions | 2FT |
20W | Wattage | 10W |
8 | Max connect number | 12 |
8 Packs | Quantity | 6 Packs |
| | 6500K | |
| | Linkable | |
| | Accessories included | |
4FT | Dimensions | 3FT |
20W | Wattage | 16W |
8 | Max connect number | 10 |
8 Packs | Quantity | 6 Packs |
- T5 Series 4FT
- T5 Series 4FT
- T5 Series 2FT
- T5 Series 3FT
Maddie Whale
Reviewed in Canada on January 11, 2025
Bought these for my garage in 2023. Still work very well and add clean bright instant on lighting. Easy to install as well.
Customer
Reviewed in Canada on January 10, 2025
Got these for my basement (no overhead light). Super light, super easy to install and have the option of eventually hardwiring. They light up my space perfectly!
Grumpy AF
Reviewed in the United States on December 19, 2024
I out in hexagonal ceiling lights in my garage for detailing my cars. Really wanted some side lights for better view while doing doors and wheels. These matched the warmth of my overheads, though the color is just a hair off. My intent was to mount the lights vertically, but 8’ was too tall and the angle actually looks much better. Note: The clips can be difficult to hold the lights as they easily slip, so I used a slightly larger screw than came with the originals. As far as build quality, they are pretty basic and not rugged, but they are low cost and easy to use. Love them.
qualsite
Reviewed in the United States on November 15, 2024
I had previously bought a case of their warm white, so this case was the bright white version where I want the bright white light. They have worked out very well. They are easy to install, and come with switched cords, pigtails, and hardware to mount them. With the huge replacement cost of T-8 and T-12 fluorescent bulbs now, I have simply mounted many of these units to the fluorescent fixture reflectors for less cost than a replacement fluorescent bulb [or about the same cost if you bought a case of fluor. bulbs], and they work great, and is a lot less work that taking the old units down. [Note: they must be wired into the 120V line, NOT the fluorescent ballast.] They are very lightweight, very bright, and I haven't had any of them go bad on me. And nice to have those old fixtures now come on instantly with these LEDs, even in the barn and shop when it's cold, with none of that fluorescent bulb flickering and darkening with age. When I go through this case, I'll buy another to finish going through the old lights on the farm.
Riboild
Reviewed in the United States on June 13, 2023
I have bought these 3 different times and unfortunately, and mind you this is a minor grievance, the price has gone up every time, even last time I paid 40 or something close in 2021. Those, by the way, are still going along with the other two sets and I bought 2x8pk twice. The only "failure" I have had was the inverter/switch that comes with each. I have several extras in storage as I linked almost all of them to each switch in series. That being said, if you say, had 4 per inverter-switch, it would probably be better as there wouldn't be as much strain on the inverter electronics or switch. That being said, the switch was pretty crappy/cheap. I made one my self with the internal electronics being kept intact. It resolved the issue. That being said, if you have some lights stop working, try replacing the cord that actually plugs into a receptacle, since that is the actual part that powers all of the lights downstream. I have a basement close to 2000 Sqft and ~14-16 of these down there... They are freaking bright, and for real, they almost felt like toys they are so lightweight. The retention clamps that mount them, are pretty darn flimsy and if you ever have to remove them and reinstall, be careful they break easily and the screws are pretty brittle also... I never used the screw, used some I had since they were going into more denser wood then I would imagine is the norm. I can attest that I have had not 1 single LED or set go out and I have had several of these installed and the ones in the basement have years of run time on them, as I work there a majority of the day. I have all of them hooked to one circuit breaker: 15a and 120v and I have never had it pop or even come close. I haven't checked in a while but I have what I mentioned and a few 2x4 led drop ceiling leds that I purchased also when there was a drop ceiling down there and I will say this, previously, I had 2x8' fluorescent lights and 2 4' ones and they would, in the event of using my belt sander or drill press, cause the Circuit breaker to pop. These even with all the light output are significantly lighter in the power consumption and considerably higher in the lumen output. I give em sincere props!!!
Customer
Reviewed in Australia on December 20, 2023
Exactly as i envisioned. Super bright. Would recommend. You probably won't get it as nice as mine tho.
Chris
Reviewed in the United States on May 1, 2022
I'm updating the lighting in my garage and was agonizing over the myriad possibilities. I tried these and wow! The box arrived on time and was so small I thought it was a mistake. Opened it up and the lights were so compact that 4 rows of two lights back to back were only 4" x 3" x 46". The connecting wires were distributed in a cardboard channel the length of the lights.I read comments here about the delicateness of the metal parts of the lights and how they sometimes come dented or creased. These were perfect. I was able to test them quickly by using the 7 interconnect cords and 1 of the 4 plug/switch cables. I was able to push in the connectors' plugs carefully and not bend/deform the lights.The clips are tiny but match the lights. The screws are also small and as commenters here have noted, the Philips head strips easily. I found that manual drive just part way and then use a power tool to fairly quickly drive until tight prevented stripping. I found that the shape of the head caused a bit of resistance when hand tightening just prior to fastening the clip tight. Going the next little bit by hand had a big chance of stripping the head; whereas, the fast drive had some momentum and overcame the resistance without stripping the the head. I used PH2 size bit. I managed to not mangle the clips but I can see how easy that might be if one tried t rotate a tightened clip out of alignment with a stripped head that couldn't be loosened. I had one case where I used two pieces of 1x4 material to securely hold the clip and rotate carefully.The 8 lights cover a 30' x 12' garage with 4 sets of 2 lights. Attached is a picture I took after doing the first 4 lights. I'll likely get some wire molding to protect and coverup the connecting wires on the beam. I'll also fix up the power side.I wish there were 4 hard wire tails and not just two, but I think I can modify a couple of the provided end-to-end connectors to act as hardwire pigtails. Interestingly the tails have hot, common, and ground, but the plug/switch connectors and the 48" connecting cords only have 2 wires. But that's okay given proper polarization.The 4000K color seems great and the 2200LM brightness is ample. Overall, so far so good. At $7.50 per light, quite the bargain too. I hope they last, but swapping out should be simple if the same form factor is maintained over the long haul.
もりやま
Reviewed in Japan on December 27, 2022
このタイプのLEDは色々と買って使っていますが、つけた瞬間は良いと感じたが、以前に購入した物と並べると前に買った物の方がワット数も小さい上に明るかった！
Customer
Reviewed in the United Kingdom on December 26, 2022
I installed these in my unheated garage. Have worked great for th past year. Much better than old fluorescent strip lights.
Recommended Products