Shopping Cart

Your cart is empty.

Your cart is empty.

BAOSHISHAN 0-150μm Grindometer Stainless Steel Fineness Gauge ISO Standard Single Groove (150μm)

4.6 (9) Write Review
Free shipping on orders over $29.99

$89.99

$ 39 .99 $39.99

In Stock

1.Size:50μm


About this item

  • [0-150μm, INDEX VALUE 5μm]--We have four kinds of single groove grindometer: 0-25μm, 0-50μm ( index value is 2.5μm) 0-100μm, 0-150μm ( index value is 5μm). Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns (μm), the accuracy of fineness plate grooves ± 1μm.
  • [USING AND READING]--Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
  • [READING UNIT: μm]--Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
  • [HOW TO CHOOSE GRINDOMETER]--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
  • [NOT ONLY FOR PAINT]--Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.


Product Description

Grindometer
Grindometer
Grindometer
Grindometer

HOW TO CHOOSE GRINDOMETER

Choose a fineness gauge 5-10μm higher than the product fineness range you measured.

Single groove means only one scraping groove, Double grooves refer to two scraping grooves, which are convenient for comparison.

Fineness Gauge

More GRINDOMETERS from BAOSHISHAN

Range 25μm/50μm/100μm/150μm 25μm/50μm/100μm/150μm 15μm/25μm/50μm/100μm/150/300μm 25μm/50μm/100μm
Groove Single Groove Single Groove Double Grooves Double Grooves
Unit μm μm/H μm/H μm/H/MIL
Accuracy ± 1μm ± 1μm ± 1μm ± 1μm
Scraper 2 1 1 1

Suzanne R
Reviewed in Canada on March 23, 2024
I use this during the melanging process to ascertain how much more my melange needs to grind for to eliminate all grittiness in the chocolate mixture, sometimes from the nibs sometimes from the sugar/allulose. Must have tool!
Carson
Reviewed in the United States on October 27, 2024
Does what it's supposed to! Haven't had a need for the second scraper, but this has helped make sure our chocolate comes out objectively smooth.
Koncos Zoltán
Reviewed in the United States on July 6, 2023
Everything was OK
:)
Reviewed in the United States on November 4, 2023
Basically the scrappers all have nicks in them, the plate also has a very rough edge and likes to trap pigment in it easily, it even gave a false reading of a dye as 70 microns, which as a dye isnt possible due to it you know... being smaller than a water molecule.Its not a a legit tool
MANDRADE
Reviewed in the United States on December 7, 2022
Excelente calidad de producto y una medición muy seguraExcelente relación calidad - precio
George O'Hanlon
Reviewed in the United States on July 24, 2021
The channel where the product is scraped is not polished but has visible roughness that will cause the instrument to give false readings. It may be useful for food products, but not paint!After submitting the review above, the seller contacted us and offered a solution that was acceptable and we are pleased with the service and responsiveness of the seller. We have given them more stars of approval.
Richard
Reviewed in the United States on March 12, 2021
Arrived well packed. Good tool. Used for measuring particle size in chocolate.
Diego R
Reviewed in the United States on October 14, 2020
It's a good product, it arrived on time and comes with a portable case. We are overall satisfied with it.
vyebrzxqh
Reviewed in the United States on January 29, 2018
Surprising quality for the price. Cannot verify Accuracy as I have nothing to compare it to. I needed to compare "relative" results which this gauge worked well for.