Your cart is empty.
Your cart is empty.Product Description
BRIGHTEST AUXLIGHT 9006, HB4, 9006LL, 9006XS LED BULBS WHITE
SPECIFICATIONS:
LED type: 33pcs 5730 SMD Chips, Voltage: 9-30V, Power: 8.5W, Lumen: 2800LM(1400LM/PC), Current: 0.40A, Dimensions: 2.20 inch (from the bottom to the top of the projection lens) * 1.30 inch (for the body part) * 0.70 inch (for top projection lens), Lifespan: up to 50000 Working Hours, Waterproof IP: 67, Color: 6000K Xenon White (Set of 2)
IMPORTANT NOTICE!!!
1. Fit sockets: 9006, HB4, 9006LL, 9006XS etc.
2. Please check your vehicles owner’s manual or the original bulb to confirm the correct bulb size you need before placing the order.
3. The filter system may not be 100% accurate or up to date. If you are not sure which bulb size that your vehicle requires, please google "Philips automotive bulb look-up."
Customer
Reviewed in the United States on February 8, 2025
Awesome product and at a great price. Super bright
AZA
Reviewed in the United States on February 26, 2025
These LED bulbs were a perfect fit for my 2011 camry. Not sure about the lifespan yet, but visibility, quality and brightness are excellent. They produce white light.
Nabaraj Lamichhane
Reviewed in Australia on August 19, 2024
I thought it would be brighter than a halogen bulb, but it's worse, so I don't recommend it
Kim Hansz
Reviewed in the United States on March 15, 2024
Do not expect this to blow away a decent halogen, it doesn’t. Yes, this product is brighter than the factory BMW halogen low beams I replaced, however, it’s not a difference big enough to blow the factory ones out of the water. Where this does shine is in three aspects; price, efficiency, and color temperature. For $6 a bulb, you can’t go wrong. It’s about half what you would pay for a halogen. The bulb is significantly more efficient both in heat output and power draw than a halogen. This is quite nice for my car given it’s early 90’s electrical. The color temperature is the last and final point. The 6000k option was perfect for what I was trying to achieve, which was a mid 2000’s xenon look. It gives an icey blue light while not looking too blue or aftermarket. Referenced in the picture is my BMW E36 with the bulbs installed as low beams.
Red Jack
Reviewed in the United States on December 27, 2024
Nice and bright, daylight color which matches my LED headlights. Better than stock lights. I bought a pair of bulbs in September, 2021. One went out completely in July, 2024. The other went dim in November, 2024. Not too bad a lifetime but they were only used intermittently. I would have liked them to last longer.
Chris Gilvin
Reviewed in the United States on December 18, 2024
Great product, easy to install end result exactly what I wanted very bright headlights to match these new vehicles
sebas
Reviewed in the United Arab Emirates on November 14, 2024
Brightness is very poor
Scott Mclennan
Reviewed in Canada on April 4, 2024
I got these for my wife's Nissan Sentra, installed in minutes. Nice and bright and clear. After 3 months and the Amazon returned date had closed one headlight failed. Contacted the seller and within a week I had a replacement at my door.
diesel8888
Reviewed in the United States on April 20, 2024
I wanted to replace my fog lights lamp with yellow LED and I wanted to try this out. They are easy to install I like the size because there's not a lot of room in the fog lights so these are perfect because they are like OEM size. I'm not very thrill about the brightness because my piaa halogen light bulbs are better than this. It is supposed to be better than halogen since they are LED right?
My thoughts
Reviewed in the United States on April 18, 2024
I bought these for my fog lights in conjunction with wanting to switch my low beams and high beams over to the bright white LED’s. These worked fine, but the headlights weren’t as bright as they were advertised to be. So, I removed the headlight’s and returned them to Amazon and put the halogens back in. I also put the halogen fog lights back in so that all the lights match. Unfortunately, when removing these lights, I broke a tab, and can’t return them. I am OK with that though. These were relatively inexpensive and I should be able to sell them at a local flea market. The tab that broke is just for removing the bulb and can easily be substituted by using a small screwdriver. I will let the buyer know that.I was pleased with these lights, though. Had the headlights worked out, I would’ve had no complaints about these bulbs.
Joy Hamzo
Reviewed in the United Arab Emirates on September 19, 2023
Failed after 1 month
Alex F.
Reviewed in the United States on February 18, 2021
... because they do not focus at the same spot as a "real" H1 bulb. Since the light pattern emanating from the luminary is so diffuse due to being offset from the focal point of the housing I can't really see using this in a vehicle. The mounting flange should be in the groove noted in the image, but it is not.One bulb failed after less than an hour of operation. It was due to a bad solder joint between the (-) lead and the diecast metal body, which sinks a lot of heat (which it is supposed to), so it is hard to get a good wetted joint.-------------------I was initially disappointed that the H3 only has 6 LED chips per side, whereas the H1 has 18. However, the H3 (3570 LEDs) gets much brighter with lower voltage. Both consume the same power at 12 volts, but installed, the H3 is brighter than the H1.The H3 required a bit of dremelling of the notch to get it to fit the socket, and since the terminal on the power wire is not insulated, I felt obliged to wrap it in electrical tape to prevent it from shorting on the housing. The 360 degree illumination feature presumably refers to the fact that the H3 body freely rotates in the flange. I'm not sure what effect this will have on heat dissipation going forward.
Recommended Products