Your cart is empty.
Your cart is empty.
How to Work ?
1. Clean injector's outside with gasoline or cleaning liquid before open machine
2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.
3 Turn on ultrasonic system，pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
4 Fixed injectors on main machine
5 Testing injectors for resistance, shorts, and current draw
6 Performing leak test, spray pattern, and flow rate testing on flow bench.
7 The injectors are now returned to the flow bench for retesting of all functions.
Specification:
* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 109990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm
* Weight: About 35kg
Launch CNC-602A injector &cleaner tester package list:
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 BUICK injector adaptor
11 199010019 Injector testing liquid (pick out)
12 307030024 Injecter detergent (pick out)
FUNCTIONS:
Ultrasonic Cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
Idle Speed Test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
Medium Speed Test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.
High-Speed Test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
Acceleration Test: Simulate the acceleration state of the car and test the performance of the fuel injector.
Shift Speed Test: Simulate the shifting state of the car and test the working performance of the fuel injector.
Leakage Test: Test the sealing condition of the fuel injector.
Idle Dpeed Sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector.
Medium Speed Sprayability Test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
High-Speed Sprayability Test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
Reverse Flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).
No-Disassembly Cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.
ROKKET
Reviewed in the United States on July 21, 2023
Total Junk: Bought 3 & ALL Defective:I bought 3 of these machines and ALL of them have broken within 2-months of use. Specifically, the tubes that hold the solution to test the spay patterns WILL NOT DRAIN. When you push the "DRAIN" button the machine vibrates & shakes and only 4-of the 6 tubes will drain. The 1st unit I thought was maybe a fluke, now ALL 3 of them have the same issue. Scanned the QR Code to get parts or warranty service and it is in CHINESE!!!Buyers beware of having an $800 paper weight in your shop.
Daniel DeSio
Reviewed in the United States on January 19, 2022
This is the second unit I had to purchase because they don’t offer replacements. There does not appear to be anyone in the United States that will warranty the products either
craig stackhouse1
Reviewed in the United States on June 22, 2021
The machine is an overseas brand both units run off of 220 they only give you 1 220 converter you need a second one in order to be able to operate the machine correctly there is no United States launch company that will give you product support on it because it is an overseas brand. Could not get a hold of the company until I finally required the return of the product. Plus the fuel pump in the product would not power up so therefore it was completely useless.
Abdulrahman hassan
Reviewed in the United States on July 26, 2020
Very easy to use and its got an ultrasonic cleaning that makes the fuel injector like a brand new oneAnd very fast shipped you will receive it within 10 days
Freddy Enrique Valera M
Reviewed in the United States on January 27, 2020
Entrega recisa
JesseSeven
Reviewed in the United States on September 5, 2019
Some slight damage but nothing to stop it from working.... not worried about that. Seller doesn’t communicate with any questions i have... u need to purchase a second inverter to use both machines but cant find where to purchase it
D. Petersen
Reviewed in the United States on May 26, 2019
This injector cleaner is awesome. You can test and clean injectors 6 at a time or less if you want to plug off the other ports on the fuel rail.It is easy to use and doesn't take very much space in the garage or shop.Great for the car enthusiast, entrepreneur, or for the repair shop; this is a money saver and a money maker.The ultrasonic tank does a great job of breaking down fuel, carbon deposits and dirt. The test rig also blasts out buildup.You can have great confidence installing the injectors that they will work as they should and flow the proper amount. It's good for verifying new injectors and checking balance between the set. Or get your old injectors back into top condition. You can observe the spray pattern at various pressures and simulated RPMs.It's an absolute delight in the shop.
Joe G
Reviewed in the United States on April 9, 2019
It works as described right out of the box but it only comes with one 120 to 220 inverter so you can only run the tester or cleaner one at a time, so I massaged the seller and I was told I needed a power strip with an Asian/Australian connecter . They don't have them at there store so I have to look for one ells where or buy another 120 to 220 inverter, witch they emailed me a link to where I could buy one", Or I can get creative with the power cords from both the tester and cleaner, if you know what I mean. I think I'll try the last one ,needless to say if I knew this before hand I would have bought it anyways . All in all I'm very happy with my purchase .. 😊
Recommended Products
