Your cart is empty.
Your cart is empty.Product Description
- C80 Fuel System injector cleaner kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks. Non-Dismantle injector Throttle and fuel system. The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle.
- Functions:
- 1000ml Bottle: Made of stainless steel material for anti-scratch and corrosion resistance and safe and reliable.
- Bottom Oil Outlet Design: No residue in cleaning, no corrosion of cleaning equipment.
- One-Way Valve: Good air tightness.
- Rotary Valve: Adjust the pressure to make the detergent spray better.
- Customized Pressure Gauge: Display air pressure and oil pressure.
- Anti-Shock Rubber Protective Cover: Prevent the instrument from being damaged by dropping.
- Hook Design: Easy to hang and move cleaning tools.
ACCESSORIES
- 1pcs Bottle body / 1pcs Addition funnel / 1pcs Return pipe clip / 2pcs Thread plug / 2pcs Hose clamps
- 1pcs Compatible for Ford, Compatible for Lincoln / 1pcs Compatible for Ford / 1pcs Compatible for GM,Compatible for
- BMW,Compatible for Chrysler / 1pcs Compatible for GM,Compatible for BMW
- 2pcs 6mm Universal hose quick coupling / 2pcs 8mm Universal hose quick coupling / 2pcs Hose plug
- 1pcs TWC cleaning joints / 1pcs Universal joints / 1pcs Throttle cleaning nozzle
- 1pcs 9.49 Compatible for Mazda,Compatible for Toyota,Compatible for BYD / 1pcs 7.89 Compatible for Mazda,Compatible for Toyota,Compatible for BYD / 1pcs 6.30 Compatible for Mazda,Compatible for Toyota,Compatible for BYD
- 2pcs Universal fast / 1pcs Compatible for Crown,Compatible for VIOS
- 1pcs Compatible for Crown,Compatible for VIOS,Compatible for Passat / 1pcs Compatible for Honda,Compatible for Toyota,Compatible for BYD
- 1pcs Compatible for Mazda,Compatible for Buick / 1pcs Compatible for Honda / 1pcs Compatible for Toyota
- 1pcs Compatible for Land Rover,Compatible for New possibilities
- 1pcs Compatible for New possibilities,Compatible for Soueast Motor,Compatible for KIA
- 1pcs Compatible for New possibilities,Compatible for Soueast Motor
- 1pcs Compatible for New possibilities,Compatible for Soueast Motor Mitsubishi
- 1pcs Compatible for Volkswagen,Compatible for Audi,Compatible for Honda / 1pcs Compatible for Volkswagen
- 1pcs Compatible for Volkswagen,Compatible for Audi,Compatible for Passat
FUEL SYSTEM CLEANING
- lmprove fuel supply, full combustion, and reduce exhaust emissions.
INTAKE SYSTEM CLEANING
- Reduce carbon deposits, increase the oil-gas mixture ratio. and smooth idle speed.
TWC CONVERTER CLEANING
- Solve the problems of weak acceleration and difficulty in increasingengine rpm and vehicle speed.
WORKING PRESSURE ADJUSTMENT
- The pressure can be adjusted for better sprayability of the detergent.
NON-DISMANTLING DESIGN
- C80 Fuel system Injector Cleaner is a non-removable fuel system cleaning injector, a gasoline car cleaning kit.
WIDE RANGE OF APPLICATIONS
- C80 Fuel system Injector Cleaner Including a variety of connectors, suitable for cars and light trucksthroughoutthe european union, asia, and the united states.
APPLICABLE VEHICLE CONDITIONS
- Engine Shake
- Under powered Vehicle
- Corrosion Inside the Engine
- Increased Fue Consumption
- Fault Light Alarm
- Excessive Vehicle Exhaust
WIDE APPLICATION
- Throttle valve greasy adhesion
- Throttle with a new look
- Intake valve sludge adhesion
- The intake valve has a new look
- Injector clogged
- Non-clogging injectors
EFFICIENT CLEANING
- Pneumatic cleaning, without an external power supply, avoids the fire hazard caused by electric sparks.
- Restore vehicle power and driving performance, and greatly reduce fuel consumption and exhaust emissions.
HOW TO CLEAN THE THROTTLE BODY?
- Start the engine, put the engine at idle speed until the engine is working stably, and then turn off the engine.
- Open the oil filler cap of the cleaning equipment, pour a bottle of cleaning agent into the cleaning equipment bottle, tighten the cap, hang the cleaning equipment on the engine cover, and close the ball valve switch on the oil outlet pipe.
- Disconnect the intake pipe from the closest valve, start the engine, and put it in a high idle state, usually the engine runs at 1500 rpm.
- Install the atomizing nozzle on the oil outlet pipe of the cleaning equipment, put it on the air inlet pipe, and slowly open the ball valve on the oil outlet pipe of the cleaning equipment until the liquid sprays out from the nozzle.
- Keep the speed at 1500 rpm to clean the carbon deposits in the engine intake system.
- After cleaning, turn off the engine and reconnect the intake pipe.
HOW TO CLEAN THE FUEL SYSTEM TEST?
- For hose line connection methods with and without return hose, Please refer to the manual in the "Product guides and documents" section of the product detail page.
- Add the cleaning agent into the stainless steel bottle, connect the compressed air to the air inlet of the washer and adjust the pressure to 40-50PSI, check whether there is oil leakage at the connection, start the engine to start cleaning;
- Drain out the pressure in the bottle after flushing, and then disconnect the cleaning tool. Restore all of the pipes of the fuel system and check there have no leaking.
- Note: The carburetor cleaning method is the same as the EFI cleaning method, the pressure is 1-5PSI, too high pressure will damage the carburetor needle valve and cause too much oil into the combustion chamber.
HOW TO CLEAN THE CATALYTIC CONVERTER?
- Use a throttling vacuum adsorption device for cleaning, and one end of the device is sheathed in the engine intake manifold (note: do not insert into the brake vacuum pipe).
- After preheating the car for 5 minutes, run it at idle speed, slowly open the ball valve, let the detergent enter the manifold very slowly, after 20-40 minutes after cleaning, increase the throttle to 3000-4500RPM, run at air speed for a few minutes, and the dirt will be dissolved Or burn or discharge from the exhaust pipe after strong oxidation.
- Preheat the car, connect the suspension tube to the three-way catalytic cleaning agent; insert the equipment needle into the PCV vacuum tube; start the engine, open the equipment control valve, and make the cleaning fluid drop in the window.
- Idle the engine until the chemical solution is washed; turn off the engine after cleaning, and reconnect the pipeline. Run the engine at an idle speed of 2000 for 5-10 minutes, and drain the residual liquid.
Check fuel injection model, throttle or EFI:
- EFI Model :
- Find out the fuel return hose, disconnect it and plug it with suitable adaptor;
- Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;
- Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;
- Charge the cleaning fluid into the tank of the cleaner;
- Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;
- Check all connect point to make sure there is not leakage;
- Start the engine to clean the fuel system.
- To the Throttle Style:
- To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
- The way to identify the inlet and return hose:
- Generally speaking, inlet hose is bigger, return hose is samaller;
- There is always a filter connected in the inlet hose side, and a buffer in the return side;
- here is arrow on the hose to show the fuel flow direction
Crystal T
Reviewed in Canada on March 13, 2024
Did the job, no complaints.
Allan Lindsay
Reviewed in Canada on April 5, 2024
Very surprised on how well this works. I donβt have to wait for the shop tool. I can use my own.
Customer
Reviewed in Canada on June 28, 2023
This is a good tool for the home mechanic that wants to save money and learn how to do repairs.
andmechanic
Reviewed in Canada on November 26, 2023
Use it almost daily at work when I sell efi service. Bought my own because the shop one is either being used or the fitting u need is being used by another tech. Works well I recommend
rhazewin
Reviewed in Canada on April 25, 2023
The tool is well made and works just as it should.Some compatibility info: the tool comes with a Japanese air quick connect fitting that uses 1/4" bspt thread. BSPT is not compatible with npt (different thread pitch, different taper). If the Japanese quick connect fitting isn't common in your region you will need a 1/4" bspt male to 1/4" npt female adapter to use your preferred quick connect fitting. Also, the tool comes with a fuel rail test port adapter for GM vehicles but not the smaller Schrader adapter for fuel rail test ports that are common on Ford vehicles.
JCV
Reviewed in the United States on March 14, 2022
Before I bought new fuel injectors for my truck. At a cost of $250.00 plus the time to install them. I thought I would try cleaning them. This device worked perfectly. It came with the right adapter for my fuel rail. I gave it four stars because there were no directions or precautions with the tool. I have used these tools for years when I worked as a tech in a New Car Dealership so I knew what to do.Also, I had to change the quick disconnect adapter for the air supply and it was cross-threaded. I was able to fix it but it was touch and go. It did clean the injectors and the truck performs much better. Idles smoother too.
Tom
Reviewed in the United States on December 5, 2022
I bought for my shop but it doesnβt come with carrying case. All the fittings/adapters will be long gone in no time. Will return for the one with the case.
Timothy Seiler
Reviewed in the United States on August 19, 2020
Looked pretty nice when I received it, but when I needed to use it the valve on the outlet hose(to the fuel rail) would not open! RETURNED IT!!!#POS.
David & Jessica Marker
Reviewed in the United States on July 23, 2019
The system works well to clean the fuel system.
Mr Krabs
Reviewed in the United States on June 27, 2019
I got this fuel injector cleaner, used it twice and the GM adapter broke. It is made of what seems like pot metal. I sent a request for a new adapter to be sent but pretty certain I will not hear back from them. The injector cleaner worked well the one time I got to use it. Disappointed!
Richard Rafaniello
Reviewed in the United States on March 12, 2019
Not sure what type of air coupler fitting it has, but it's not the typical 1/4" T or I/M. Lots of fuel line fittings. Would be better if it came with block-off adapters for the return line.
Luis R. Saez
Reviewed in the United States on October 3, 2019
Paid for purchase on first use.
Take it from a pro
Reviewed in the United States on April 24, 2019
Great price great tool what more can be said :-) .
Recommended Products