Your cart is empty.
Your cart is empty.Product Description
Aluminum Heat Shield
Aluminum heat shield provides good heat shielding against oxygen, water vapor, and light and creates heat reflection. It is conformal and rigid. The aluminum heat shield can adapt to rainy, sunny, and windy weather.
Fourub heat shield aluminum is 15" × 24" wrapped for folding up, not in a roll, which results in creases that cannot be smoothed out. However, this discrepancy does not impact its usage or functionality.
The length and width are 24 inches wide, and it is size and cut to order. For example, the order of 1( Oty=1） is 24“ × 48”， and the order of 2 (Qty=2) is 39" × 96“ one continuous uncut piece.
- Packing: Folder Up × 1 Pcs
Fourub Heat Thermal Barrier
Fourub heat barrier protects parts from radiant heat. It can protect painted surfaces, plastic parts, or any part from damage by radiant heat. Thermal barriers consist of a surface layer coated with a heat reflective aluminum foil laminated to ceramic fibers of silicate wool. The highly reflective surface of the ceramic fiber silicate material is capable of withstanding radiant heat temperatures up to 2280°F.
- The highly reflective surface of the ceramic fiber silicate material is capable of withstanding radiant heat temperatures up to 2280°F.
Easy to Cut
Water Resistant and Easy to Clean
Heat Temperatures up to 2280°F
Aluminized heat barrier insulation offers flexibility and ease of use in the automotive industry for cars, trucks, RVs, and motorcycles. The thermal armor stops radiant heat from entering the cabin; it is used in applications such as firewalls, undercarriage, underfloor areas, transmission tunnels, wrapped fuel cells, and underhood options. Thermal shields are corrosion-resistant, chemically resistant, fire retardant, and flexible.
Kind tips:
Aluminized heat shield that incorporate rubber models, such as those with a cotton layer, may experience separation between layers. This is a normal occurrence and does not compromise their effectiveness.
1.As different computers display colors differently, the color of the actual item may vary slightly from the above images.
2.Please allow 1-2 mm thickness differs due to manual measurement.
3.The image shown here is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern.
T. G.
Reviewed in the United States on September 5, 2024
The aluminum face is a bit thicker than other heat reflectors that I've seen and the fibrous backing has a lot of thick layers. I think this should do a good job insulating and reflecting the heat. The only downside is the edges seem like they will peel away fairly easily as there isn't much holding it together. So if your intended use may take some abuse, you'll need to figure out something to beef up the edges.
Wylie Wiggins
Reviewed in the United States on September 4, 2024
Slightly misleading title and what I consider to be an overpriced product considering the quantity delivered.
L1Pa
Reviewed in the United States on September 27, 2024
I'm using this to wrap around the exhaust hose for a diesel heater. Works well and keeps the heat from being a problem under the heater.
Anthony
Reviewed in the United States on September 24, 2024
I’m working on updating my electrical runs in my truck while installing fuel injection. I got rid of the original plastic loom, it had melted in this area from the exhaust heat. I replaced the wire wrap with the newer style high temp split loom and added this heat shield in this area for that final layer of heat protection for the wire insulation. Shouldn’t have any problems with this much heat protection now.
Zach
Reviewed in the United States on September 13, 2024
This folded up aluminum backed heat shielding is pretty great.This heat shielding arrives folded up in a plastic zip lock bag as I show in my pictures.The fiber on this is pretty thick and so is the aluminum but it does feel like the aluminum is easy to just peel off of the fibers. The issues I have with this is that it doesn't have an adhesive on the back which makes me have an extra step to find high heat resistant adhesive to use this and I feel this is pretty expensive stuff for the amount that you receive.Overall, good heat shielding but the lack of an adhesive backing makes this a bit more difficult to use for high heat applications.
D.M.Rich
Reviewed in the United States on December 8, 2024
I don't have any good photos of the heat shields in place because the generator was already installed and buttoned up before I thought about it. We have a custom-built generator enclosure near the house & I wanted to add a little extra heat insulation because you never know how long you will need it to run. We got both the 1/4" & 1/8" aluminized heat shield pads from Fourub. I used the 1/4" heat shielding on the back side where the exhaust pipe exits the box and used the 1/8" heat shielding on the upper area where the back wall meets the lid. This was just extra protection on top of what was already provided in the enclosure. So far, we're really happy with the results.
Designer77
Reviewed in the United States on November 19, 2024
So I know these are for automotive use but I had an unconventional need for this. We bought a metal heat cover for our propane firepit we use for camping - it helps the heat not just dissipate up, but rather pushes it out at the people sitting around the fire. Its a game changer to stay warm and not have to sit on top of the flame constantly, you can sit back, relax and still feel the heat. Heat Warden if anyone is wondering.But when its only 1 or 2 people around the fire you get even more heat directed at you if you can block off the unused sides so it pushes heat out only to sides where you are sitting. The side panels that came with the cover are like $80 each - after paying $200 for the cover I was looking for something less expensive to just block the sides. Another issue was weight, as everything we add to the motor home adds to the weight, so keeping things light weight and compact is important.Found this stuff and as it can withstand very high temperatures and reflects 90% of heat seemed like it was worth a try! It works perfect!!! Love that it folds up nice and small, weighs nothing and does the job perfect for a fraction of the price. As you see in my photo I just tucked it under the rim of the cover and it held in place fine, I bought clips too just in case. The back felt side gets a little warm but stays relatively cool.We are going to make a wooden top that can sit on top of the heat base and line the back side with this stuff to keep the wood heat resistant....that way we can use the heat cover as a table and gather round for cards, meals, etc....also keeping the little hands of our grandkids safe from accidentally touching it.This review may not help you as you probably aren't looking at this product for a side heat reflector on a fire pit...lol, but still wanted to say this stuff is great. The only issue I see for our use, is even after only using it one time the silver lining cracked a bit where it was folded under the top to hold in place and the layers seem like they will peel apart over time. So I might source some heat resistant tape to secure all 4 sides and keep it together and from cracking. Hope this was helpful!
T C
Reviewed in the United States on October 1, 2024
Good sized aluminum backed heat shield. It does not have an adhesive backing so you will need to plan on finding a way to attach it. Lightweight and flexible. Perfect for certain applications.
Recommended Products
$75.98
$ 33 .99 $33.99