Your cart is empty.
Your cart is empty.Product Description
In modern woodworking projects, maintaining the cleanliness of your tools presents a significant challenge. What's even more concerning is that specific projects can generate a considerable amount of particles and dust, which poses a grave threat to both your workspace and your physical well-being.
However, there's no need to worry. With the Ortis Automatic Vacuum Switch, it automatically activates your vacuum cleaner as you power on your electric tools. This switch is equipped with a delay function, featuring a 1-second delay when starting and a 7-second delay when turning off in auto mode. This upgrade boosts workspace cleanliness, letting you focus on your work without environmental worries. An essential tool for your woodworking.
Focus On Your Work
Addition of two tool outlets, then you can plug more than one tool. No need for extra extension socket, avoid messy cords and save time
2 Installation Methods
Compared with other vacuum switch, Ortis vacuum switch for power tools offers two fixing methods, screw fastening and traceless wall-mounting adhesive, ensuring firm and reliable attachment
Why You Need a Automatic Vacuum Switch
- It eliminates the distraction of reaching for a vacuum while working with potentially dangerous power tools
- It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess has been made.
- It minimizes hazardous airborne dust which can lead to a variety of ailments
The New Ortis Autoswitch Features:
- Supports a wide range of cutting tools from rotary handheld devices to large shop saws
- Runs the vacuum only while you're using your tool so you save time and electricity
- Helps to comply with OSHA requirements for dust control
- Optional 3 vacuum running modes: AUTO/OFF/ON
- Prevents circuit overload with 1s vacuum delay time
- When the load on the pool port is greater than 30 watts, the vacuum port is delayed for 1 second to open (in auto mode)
- Automatically delays vacuum turn-off by 7s to continue to clear the air while the motor spins down (in auto mode)
Ortis dust collector switch supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W
Dustin Gandellini
Reviewed in the United States on March 3, 2025
Works as attended, helps out a lot with the vacuum and dust, the vacuum. Isn’t I. The picture because had to use it for something else XD
Customer
Reviewed in the United States on February 23, 2025
Easy to use! Just plug in the vacuum and whatever tool you are using (sander, tablesaw etc) and plug this into the wall. Done!
Daniel J. Mullen
Reviewed in the United States on February 18, 2025
Switch works as it should. I turn on my random orbital sander and the vacuum turns on. It keeps the vacuum running for a few seconds after the sander shut off which is great.
Lexi L
Reviewed in Canada on February 17, 2025
Very pleased with this item. It is great that once I start using my table saw or other big shop tools, that the vacuum will switch on & off by itself. No need to run around the work area to turn the vacuum on or off.I, also, like the fact that I can turn just the vacuum on without running another equipment. Which is really nice when I have my shop vac under a table with my dust stopper pro dust extraction setup that I don’t have to fiddle around to find the on/off switch.Definitely worth purchasing.
Allen B Cernosek
Reviewed in the United States on February 10, 2025
Works great. Easy to use. Good price.
MN Outdoorsman
Reviewed in the United States on January 7, 2025
With the shop vac plugged into one outlet and the tool into another, it eliminates the need to leave the vacuum running or to reach over to turn it on and off each time the tool runs. I've used it with my miter saw and router with good results and far less dust and noise.
diamond
Reviewed in the United States on January 31, 2025
Works great. I use this with my saws and sanders to turn on the shop vac attached to a dust separator that fits on a 5 gal bucket. Perfect setup without breaking the bank. Case is plastic but seems fairly sturdy. I wouldn't bash it on the concrete floor but it's taking minor abuse well.
Flashback
Reviewed in Canada on January 27, 2025
The media could not be loaded.
mike
Reviewed in the United States on January 17, 2025
Perfect way to attach shop vac to table saw or chop saw. It even has a shut off delay, so it stays on for a few seconds after saw cuts off to get extra dust.
Mgbman
Reviewed in Canada on January 11, 2025
Easy to setup and works perfectly, exactly as intended. Good value!
Cliente de Kindle
Reviewed in Mexico on May 1, 2024
Hasta el momento ha funcionado sin problema, cumple su función sin problema. Excelente producto
John S
Reviewed in the United States on March 30, 2024
I moved my router table setup from the garage to my basement. I have everything connected to a Kreg router table paddle switch with two outlets that turns on the router and the shopvac dust collection at the same time. First time I fired up the combo in my basement it tripped the 15amp breaker. Figuring there was too much amp draw when both power tools started up It looked like a delay vacumn switch was in order. The Ortis automatic vacumn switch looked like a good choice, it even has 2 outlets for multiple tools, so less potential power tool plug switching. Since the router power switch is under the table and inconvienent to get to I orginally bought the Kreg 2 outlet switch which I fastened to the front of the router table which facilitated turning on the router and dust collection at the same time, in the garage with a 20amp circut there were no issues. The problem with the ortis switch is that when connected to power, both of the lower plugs are always hot, which means If I want to use the Ortis switch as designed ( vacumn delay on&off) then I have to reach under the router table and turn off the router or else pull the router plug out of the Ortis switch when I'm done routing which is a hassle.....or I plug the Kreg switch into the main power and then plug the router 𝙖𝙣𝙙 the ortis switch into the Kreg switch. This technique works well to turn on the the router and the delayed shopvac via the ortis switch but negates the Ortis's delay off feature since the Kreg switch cuts off the power to the Ortis switch. A fix for all this might possibly be a remote switch but then there's more money to shell out.
Josephine Tracz
Reviewed in Canada on October 21, 2024
I rarely write reviews but this thing is worth the praise. It works great, even has a delay for when the dust collector / vacuum has a high current draw. I love having two tools plugged into the same controller. I just move the hose and start cutting. I love it so much I bought 2, one for the dust collector and one for the shop vac.
Recommended Products
$10.79
$ 5 .99 $5.99
$39.99
$ 18 .99 $18.99