Your cart is empty.
Your cart is empty.Product Description
Highlight
Straight Groove Tap
Straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay attention to not being used for blind hole tapping.
Applicable Machine
When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.
Pay Attention
Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
SIZE REFERENCE SHEET
Please Choose The Right Size
Metric Right hand Thread Tap (Because of we have 16 Size of this product ,please choose the right size you want).
TattyBaby
Reviewed in the United States on March 4, 2025
This is just what I needed to clean out my old rusty trailer hitch holes on the frame of my 2013 Honda CR-V. I started by using some pb blaster and a plumbers wire brush pipe cleaning tool. While this didn't go all the way into the threads, it did remove some dirt and rust at the base of the hole. I then used the tap to clean out / renew the threads. Three of the four holes were fairly easy, but the fourth was more problematic. The forth is blocked by the muffler and it was difficult to get the tap to thread into that one. This one hole took me about fifteen minutes to get the tap to seat properly. Finally got it and now the threads are like new. There is no way I could have gotten the bolts for my trailer hitch into these mounting nut holes without this tap.
jim
Reviewed in the United States on March 1, 2025
Worked perfectly
stella
Reviewed in the United States on February 2, 2025
Easty use good quality
Jérhum D
Reviewed in France on February 12, 2025
Bon produit fait le job
Social Hazard
Reviewed in the United States on January 28, 2025
Great tap, this is 90% of oxygen sensors threads. A must have for anyone who works on cars in the rust belt and doesn't have a large tap and die set.
ian howell
Reviewed in the United Kingdom on August 6, 2024
well packaged with carry case supplied.
Nate J
Reviewed in the United States on December 22, 2024
I needed to tap the hitch mount bolts for my g1 vibe because the hardware was not threading in all the way. This tap, some penetrating oil, and some patient turning got the threads cleaned up so I could get to towing some small loads. I don't know when I'll use the tap again, but it comes with a compact case so you can keep it clean, oiled and ready for use in a drawer.
Robert T.
Reviewed in the United States on December 13, 2024
First, use a 27/64 drill bit to make a hole for this tap.This tool is nice and sharp, and tapped aluminum very easily with just a couple drops of oil. We all know that tapping aluminum can be tricky sometimes, having to go back and forth, back and forth, until we finally get it done. That wasn't necessary with this one. I tapped the hole until it was as deep as I needed, and done!
Scott W. Avery
Reviewed in the United States on November 3, 2024
This arrived very quickly. It came with a protective plastic container. It worked great for my purpose in re-threading a suspension pivot on a bike. Good product for sure and a good value.
murray
Reviewed in Canada on November 18, 2024
Over the years some of my lug bolts were semi stripped as were a couple of hub threads. Suspect tire shops in a hurry. This tap worked perfectly to chase the threads back to spec easily. Use wd40 and watch a couple you tube videos bc its important to go slow and to counter-rotate multiple times to clear out debris. Lastly, blow out the threads - air compressor or canned air for keyboard cleaning - and install new lug bolts. Like new. Very happy with this tool.
Gerrit Heitz
Reviewed in Germany on October 21, 2024
Qualität: Der Gewindebohrer ist super robust und schneidet richtig gut. Die Kanten sind scharf und machen saubere Gewinde, selbst bei härteren Materialien. Er hält echt was aus und bleibt lange scharf.Schnelle Lieferung: Die Lieferung war mega schnell. Innerhalb von zwei Tagen war das Teil bei mir, gut verpackt und ohne Schäden. Perfekt, wenn man schnell loslegen will.
jorge roman
Reviewed in the United States on September 3, 2023
Works perfect
Xavier
Reviewed in Spain on January 28, 2021
Tenias mis dudas al ser de gran diámetro de rosca y usar solo un macho, cuando normalmente se pasan 3, pero con paciencia y poco a poco a quedado la rosca perfecta, recomendable.
Recommended Products
$24.99
$ 11 .99 $11.99