Your cart is empty.
Your cart is empty.Switch is commonly used with under-floor mounted brake pedal assemblies when switch can contact the brake pedal arm. Spring loaded switch is designed to return to the open position and has two #10-32 tapped mounting holes, 5/8" on centers. Designed for easy two wire connection, one "+" supply and the other to power brake lights or a brake light relay. Switch is rated at 4. 5 amps and features two male bullet terminals.
Customer
Reviewed in the United States on January 30, 2025
only worked for a few weeks - I took it apart and found out it didnt have a spring in it -- used a ink pin spring to fix it now it works
Ryan
Reviewed in the United States on June 18, 2024
Using this as a " dump bed up" alarm to notify the person in the cab if the beds is still up. If the lever is up the notification is on. If the lever is down there is no notification. Easy enough.(A bolt welded to the bed is what pushes the lever down)
Jordan
Reviewed in the United States on August 11, 2022
pretty easy to install. probably going to move it to be more hidden but easy installation. hardest part was finding the off point of it.the arm also kept lodging in the wood but was easily solved with a washer
Customer
Reviewed in the United States on February 16, 2022
Worked great
John Hallford
Reviewed in the United States on October 15, 2022
nice
J. Dubya
Reviewed in Canada on July 31, 2021
I wish the brake switch came in a different orientation, meaning if you look at the ad picture i would call it a left hand switch and on my brake switch the lever it is activated from the right hand side. In my application I have very limited space and location to mount this switch but managed to find a suitable spot, with a little head scratching! It replaces a worn out switch on my 1930 Model A roadster HotRod. The switch seems to be of good quality but only time will tell. Works as it should!
charles castle
Reviewed in Canada on July 22, 2021
I have had two of these switches from other manufacturers fail because the points do not line up correctly inside the sliding component of the switch. This one lines up correctly and has been lubricated at the factory.
Rejean Perron
Reviewed in Canada on July 19, 2021
Good quality works perfect and easy to install
WilliH
Reviewed in the United States on April 21, 2021
Used it to replace the pressure switch in an older RV. Would have been handier to install if it had been normal OFF, but so far, it works as advertised.
S G
Reviewed in the United States on August 20, 2019
Clamped to steering column for brake lights on 90 dodge. Installed hyd. Switch for cruise shut off.
Bruno
Reviewed in Canada on June 26, 2019
Works just like it should
ivan
Reviewed in Canada on May 28, 2018
Perect replacement for hydraulic brake light switch
Disco
Reviewed in the United States on February 24, 2018
This switch is closed (connected) in the resting position. Opens the circuit as the lever advances.I used a relay to make it turn on my brake lights in my bug. Bugs have hydraulic pressure brake light switches. The brake lights go off as you let up on the oedal. All modern cars use mechanical switches so the brake lights are on when the pedal is pushed. Not by how hard its pushed. It is heavy duty. Works good for my use.
Recommended Products
$14.38
$ 7 .99 $7.99