Your cart is empty.
Your cart is empty.Product Description
AmazonconfirmedFit
How to Find the Correct Bulbs for Your Vehicle
- At Auto Parts' Product's listing, locate amazonconfirmedFit | Make sure this fits
- If you have input your vehicle's info before, then it will show Fit or Not Fit directly. Please make sure check Fitment Note and Position to confirm this listing is the correct one for your need!
- If you haven't input vehicle's info before, then please follow the instructions to input and will pop out related Fitment Info, Note, and Position.
- For a vehicle's different trims, bulbs may vary, recommend check OEM bulb!
Advanced Design
Premium Alla Lighting T20 7440 7443 LED Lights Bulbs
- Each bulb is quipped with 33pcs high power and high illumination 5730 SMD LEDs;
- Built-in smart IC driver for stable current control and longer lifespan;
- Equipped with projector-lens for fully 360° light output.
- Equipped with aluminum heat sink for the best heat dissipation.
- Especially designed for replacing back-up reverse lights, front or rear turn signal lights, daytime running lights(DRL), brake tail lights, center high-mounted stop lights(3rd brake lights) lamps.
Main Features
Super Bright T20 7440 7443 LED Lights Bulbs from Alla Lighting
- Wide voltage: 9V~30V with constant current control for built-in intelligent IC driver.
- Non-Polarity, plug-n-play, easy installation.
- High illumination light output, each 7440/7443 LED bulb is about 1400 lumens, total 2800 lumens for both 7440/7443 LED bulbs.
- Lifespan up to 30,000.00 hours.
- Optional colors: 6000K xenon white, amber yellow and pure red. White used for reverse, turn signal, brake, tail lights, DRL; amber yellow for turn signal lights, and red for rear turn signal, brake, tail lights.
Gerald Ceja
Reviewed in the United States on February 24, 2025
"They're pretty bright, but the downside is that the light bulb always falls out of the socket, and I have to remove the whole tail light to plug it back in."
MSD
Reviewed in the United States on January 26, 2025
Great replacement for Amber turn signal bulbs!
Customer
Reviewed in the United States on September 23, 2024
Purchased these LED bulbs to replace the brake / taillight bulbs for a 2000 Toyota 4Runner. The bulbs are certainly brighter than the OEM incandescent bulbs, but the fitment is less than desired. The LED bulbs did not snap securely into the socket like the OEM bulbs because the ends are slightly larger where I had to use some masking tape to keep them securely seated into the socket. Another issue is that the bulbs are rated for a lifespan of 30,000 hours which equates to about 3.42 years, but the bulb installed on the passenger side lasted only 13 months before it went dark. The driver side bulb failed at about 15 months where the bulb would not shine brighter when the brakes are depressed. After this experience, I reverted back to OEM bulbs which installs securely and lasts for years.
Jason Gronlund
Reviewed in the United States on August 23, 2024
Well the big issue is at the beginning when I put it in and thought it was staying in harness the light bulb fell out inside the lighting housing and as it's heat sealed the only way to get it out is try to shake it back out of the hole! It was like trying to play some carnival game but unfortunately you don't want a prize and it literally took me an hour and a half to finally get it out of there. The diameter of the whole and the width of the bulb are so close trying to get in there with tweezers is even difficult! They really don't fit into the wiring harness mine is a 2018 F250 which it says it fits it! When I went to plug it in, it didn't go in well when I pushed it a little more to get it to grab and hold on it broke the wiring harness and the piece that brakes off is what holds it in housing. So right now I have electric tape holding them in as well as expanding the width of it to grab so it stays in. I'm sure somebody's going to say well why didn't you stop unfortunately one of the bulbs came out hit the ground and broke so I had to put them in. I had to buy new pieces for the wiring harness so it cost me an additional $250! I know the light company is not going to pay for that so when I get the new ones in I'm just going to find some bolts that actually fit and just throw these away because I'll be well past the 30 days! They are a complete disappointment they do light up nice but at the end of the day when they're difficult to put in you break your wiring harness, and then as mentioned above you have to sit there and try to get it out of the light housing losing your mind for an hour and a half completely not worth it!
kc driver
Reviewed in the United States on July 14, 2024
They are bright which is what I wanted for my turn signals. They fit well not slop and they came looking well built. Now to see how long they last. But I'd buy more if I need them
Jihad Essale
Reviewed in Singapore on July 13, 2024
The media could not be loaded.
Jon S.
Reviewed in the United States on December 12, 2024
I took a gamble on these once I saw they worked in a 2021 Gladiator. I replaced my front turn signal bulbs and to my surprise, no hyper flashers. I'll see how they work long term and how well they light up at night but they seem to be well built and installed easily.One Week Update: These work perfectly fine during the day but at night when the headlights are on, I get bulb burned out notifications and hyper flashers on the dashboard. The lights themselves seem to function properly. Doesn't bother me enough to go get new halogen bulbs since I had one burn out when I replaced.
hornms
Reviewed in the United States on December 1, 2024
This bulb is a perfect replacement for my front amber turn signal lights on my 2021 Gladiator. They are super brights, normal flash speed, quick on/off transitions, and no programming required. Very easy to change, just search YouTube. Very happy.
Ali
Reviewed in Canada on November 24, 2024
Got for my tail/brake light. It flickers and turns my third brake-light on permanently even when the car is off. Super disappointed previous version of the same bulb worked on my 2010 accord with no hyperflash. I have contacted them via email if anything changes I will update hereUpdate: I contacted the customer support and they agreed to send me these, but I never got them. Very poor customer service. This brand went from my favourite to the worst i have come across
Jose
Reviewed in Canada on November 13, 2024
The media could not be loaded.
Soms
Reviewed in India on March 31, 2023
Product works great for Innova Crysta brake/ tail light. It emits a really bright red light.Reduced 1 star as the bulb does not snugly fits the holder and is rather loose. The bulb fell into tail light assembly once.Taped the holder and bulb so that the bulb does not get dislodged from the holder
Rafa
Reviewed in Mexico on June 4, 2022
Los estoy usando en un Honda Civic 2012 sin problemas buena iluminaciòn sin fallas hasta el momento en varios meses
Jarrod Kruciak
Reviewed in the United States on April 4, 2021
I don't write too many reviews but I thought I would for this one. These lights are bright. They're exactly the look I was after. My buddy asked if those were my reverse lights. Another said they look like headlights. Not only do they look amazing and give the truck an upscale touch but also they really illuminate what's behind you. The truck guys know what I'm talking about. It's much easier to back into a parking space then to pull into one. These lights make it so easy to see what's back there. Others can see you more effectively when reversing as well. Installation was a breeze. I think it took longer to take the pictures than the install. For the Ram guys it's just unscrewing two T25 screws on each tail light. Pulling the tail light straight out towards the rear, not to the side as you'll snap the brackets. Grab the bottom most bulb on underside of light and twist counterclockwise. Pull bulb adapter out. Grasp bulb firmly but not to tight. Pull straight out. Put new bulb in and press securely. Put adapter with new bulb in bottom of tail light housing and rotating to lock in place. Grab tail light and line up the upper and lower bracket guides. Push straight in towards front of truck until you hear a click. If no gaps around edges of light then it should be lined up correctly. Make sure screw mounts line up on vehicle with tail light. Put your two T25 screws back in and tighten. Do the same for other side. You can check to make sure bulbs are working first before tightening screws back up. I read they may be polarity sensitive. If so you need to take bulb out and rotate 180 degrees and place back in. Either this is true or I just got it right the first time on each tail light. Amazing light bulb and would definitely recommend to anyone. Very very happy with this product. Can't speak for the longevity as I've only had them in the truck for a week but I'm sure they will last a long time. I have other Alla bulbs installed. Interior cargo lights have been in for over a year. They are still just as bright as the day I put them in. Great product. Great price. Easy installation.
Recommended Products