Your cart is empty.
Your cart is empty.Product Description
Alex Tech, as an expert in the field of wire management,insist on providing customers with the top quality split wire loom tubing.The easy use and durability makes the wire loom to be one of the most popular wire conduits for holding wires in position and protecting wires against abrasion & chemical corrosion in automotive, home, office and industrial wiring applications.
split design
It's split and easy to put wires in
Suitable for wiring harness
Used to wrap and protect wiring harness in automotive,home and office
Suitable for a wide range of cables
Used to manage a wide range of cables in industrial applications
scothy1976
Reviewed in the United States on March 1, 2025
Good productWill buy again
George
Reviewed in the United States on February 8, 2025
Works great
Cito
Reviewed in the United States on February 17, 2025
This protect cables vary well It is easy to install.
Running Bear
Reviewed in the United States on February 12, 2025
I bought a backup camera and the wiring harness did not include wire loom. 25 feet of quarter inch wire loom is great for the price. In local stores 6 feet of wire loom cost as much as this.
Gary Lofgren
Reviewed in the United States on January 1, 2025
I have been using this loom tubing while building out a new off-road truck. It has made protecting all the new wiring very quick and easy, plus it also makes for a good looking install. I have this tubing in 1/4", 3/8", and 3/4" and have used every size on the project at one time or another, but the 3/8" has been used the most often by far. I would say for general automotive use, the 3/8" is the best size to keep on hand at all times.
Gerry G.
Reviewed in Mexico on August 10, 2024
Satisfecho con el producto, cumple las expectativas, no se rompe y es de buena calidad
Chadnic
Reviewed in the United States on July 31, 2024
Just like Frank's RedHot, I put this stuff on everything. It really works to protect the wire from the damages of the sun, sharp edges, and stupid squirrels who like to chew on things. I did a few proactive things to make sure it doesn't get crumbly over time and it seems to work real well.1. I wipe it down with armor all before installing to protect the plastic. I wipe it inside and out just real quick and this has the added benefit of making the wire slide like butter straight through it.2. After rain, or a wash, I just do a quick wipe down on the outside again and I have had this stuff in the sun for years at a time and it looks brand new still.Well worth the price to protect your exposed wires!I hope you found this helpful!
abdulwahab
Reviewed in Saudi Arabia on July 24, 2024
للاسف اخطأت لانه اصغر مما توقعت لم استفد منه يناسب ثلاث اسلاك او اربعة من الاسلاك الصغيرة ولم اجربه عند المكينه في الكبوت
Paul
Reviewed in the United States on October 6, 2024
2009 Chev Impala LTZ with 3900 V6. The black plastic or loom around the wiring system of the car had crumbled off in several places and upon inspection was brittle all over. I used Alex Tech Split Wire Loom Tubing sold on Amazon in the following sizes 1 inch, ¾ inch, in separate bags and ½ 3/8 ¼ which was sold in one bag. I would suggest for a big project, like mine, to order all the above sizes. The loom was capable of going over the size below – hence I was able to put on ½ inch then tape followed by putting ¾ inch over the ½ inch and taping again as an example. There were also spots that were soft from the heat but not breaking off – I put the next size of loom over the original loom and taped over it. There were a couple of fastenings made like flex ties which had to be cut – I found a heat-resistant flex tie for 258 degrees at HD which slipped in the slot of the old tie. You Tube had some videos on how to start the loom and that was helpful. Be sure to attach the harness back to the support attachments, this is important – I had a Ford dealer who forgot to reattach the harness behind the engine on a recall– a few months later on a road trip the car went from 70 mph to 5 mph in a blink of an eye. Had to call a tow truck and the very small wire for the transmission in the harness had been burned through as it was touching the engine. The XFasten Wire Harness Tape sold on Amazon was easy to put on. I had to adjust and use shorter lengths in places where the wires were crowded by other parts of the car. This is heat tap and made different than electrical tape (which will melt off in a car engine compartment) as the glue is made to stick as it gets hot (car engine).
Marci Archambault
Reviewed in the United States on October 20, 2024
Great product. Well made. We purchased this item to cover the oxygen tubing, as our cats chewed through the tubing twice before us receiving this product. Super easy to use and it solved the problem. Lightweight enough, so it’s easy to move around with it. Perhaps an unexpected use, but it did the trick. Highly recommend.
Maverick Ghost
Reviewed in Canada on May 23, 2022
I got the 1/4” size to wrap my boat trailer wiring. It wraps it but it’s definitely tight. I would go with the next larger size if you’re using this to wrap trailer wires. Otherwise it seems to be great quality; recommend it !
Giampy
Reviewed in Italy on February 13, 2022
Cavo comodo e ben fatto. Peccato non averlo trovato di lunghezza 5 mt, ne ho avanzato un bel po'.
AMAZONIA
Reviewed in the United Kingdom on April 11, 2022
This feels sturdy and good quality. Easy to put on. Makes cables look a bit neater / smarter to me. I got it to prevent my rabbit biting through wires. It does the job. If you have a big thick cable you may want to get some big heavy duty stuff. This cable guard fits most wires in my house. I would buy again.
Recommended Products