Your cart is empty.
Your cart is empty.Product Description
Precautions Before Installation:
- Before installation,be sure to turn off the power supply of the milling machine. Don't install the power feed under live condition.
- The product is supplied by AC110V 50/60Hz (Please prepare the required power supply for the product).If the product is used in a region not in conformity with the national power supply, users please prepare a transformer, avoid using incorrect power supply and result in damage of the product.
- The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch.
- Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm,it is recommended to replace the two sets of carbon brushes at the same time.
Power Feed Z-axis for Milling Machine
This power feed Z-axis for milling machine is made of tough aluminum, which is strong and durable. Its surface has been specially treated such as polishing to resist corrosion and abrasion, which allows it to maintain a long service life.
Manual and Automatic Control
This multifunctional power feed for milling machine can be set to work automatically at a constant speed, or it can work by adjusting the speed adjustment knob. And the circuit breaker automatically protects the transmission gear and electronic components during the whole process.
High Efficiency and Low Noise
This mill power feed adopts Gleason Spiral Bevel Gear: High transmission efficiency, stable transmission ratio, wear resistance, long life, low noise, large arc overlap coefficient, high bearing capacity, reliable operation, compact structure and energy saving. Considering the loud noise when the milling machine is working, the low noise feature of this power feed is very helpful in reducing the noise in the working environment.
Simple Operation
- Rotate Speed: 0-200 RPM; Max Feed Rate: 650mm/min; Max Return Speed: 850mm/min.
- The speed adjustment efficiency is fast. When milling, the transmission speed changes little, and the milling surface has high precision and smoothness. The machine will not shake when it is driven at low speed.
Easy Installation
- Features: Small size, Simple installation with reference to the X-AXIS instruction, low noise when reversing.
- This power feed can work with almost any horizontal knee type mill and other small mills with the same mounting pattern and a 5/8" diameter shaft on the end.
Wide Application
This power feed is an indispensable collocation for your milling machines. This table milling machine power feed fits almost any vertical knee type mill, rocker milling machines, drilling and boring machine, and small grinders.
GPOAS is a new prominent brand that focuses on in industrial equipment and household tools
- 1 x Power Feed Z-axis for Milling Machine
- 1 x Copper Gear & 1 x Flat Key Pin
- 2 x Limit Block
- 15 x Round Flat Washer
- 1 x Nominal Diameter
- 4 x Install Screw
- 1 x Limit Switch Box
- 2 x Limit Switch Spring+1 x Handle Spring
- 1 x Bearing Inner Ring
- 1 x Connecting Rod & 1 x Flange
GPOAS Z-Axis Power Feed Kit For Milling Machine
0-200 RPM Rotate Speed & 450 in-lb Torque & 90W,110 V, 50Hz/60 Hz
GPOAS Z-axis power feed kit is equipped with sturdy materials and precision components. It works efficiently and quietly on equipment such as 5/8" shaft end milling machines. In addition, it is designed with manual knobs, automatic buttons and feed reserving handles for easy operation. It is the perfect companion for your milling machine.
- Model: AL-460 Z-AXIS
- Control: Manual and Automatic
- Power: 90Watt, 110V ,50 / 60Hz,Single Phase
- Rotate Speed: 0-200 RPM
- Max Torque: 450 in-lb
- Max Feed Rate: 650mm/min
- Max Return Speed: 850mm/min
- Net Weight: 3.75kg/8.27 lbs;Product Dimension：7 x 3.5 x 11.7 INCH
MJB
Reviewed in the United States on January 10, 2025
I got tired of cranking the handle. I took a chance, despite some of the negative feedback, and bought it.I have a series 1 "J" head Bridgeport. This control installed perfectly, no modification was needed even the keyway fit.I'm not sure why others struggled so much to install it. I've been a tool and die maker for over 40 years. This was child's play.
Dustin lett
Reviewed in the United States on March 27, 2023
Item description is inaccurate will not fit bridgeport type mill. Instructions are horrible and make no sense
Charis Group
Reviewed in the United States on February 26, 2023
I have a drill mill so I do not have a knee. I built an attachment so I can use this unit to raise an lower the head on the mill. After some experimenting and subsequent modification to the attachment the power unit works great. No more hand cranking the head up and down. I use the hand crank for close adjustments and the spindle micrometer for fine settings. I love this z-axis power feed.
John carrel
Reviewed in the United States on February 25, 2023
The media could not be loaded.
Allen H.
Reviewed in the United States on November 7, 2022
used for power feed on a bridgeport mill.
TW
Reviewed in the United States on November 28, 2022
Yes I took a chance on Chinese garbage, bit me in the @$$.1. no instructions, literally just a diagram.2. says it fits grizzly in the instuctions- no it doesn't.3. adapter collar doesn't even align with the parts it comes with.4. you will need a lathe to fit this up. The gears do not fit the shaft.5. blew my GFCI when it was plugged in. I spent half a day modding my lead screw and making a adapter braceck to mount it only to find out it cant power up.nolongdingdong can't build anything worth the money.
Craig Andera
Reviewed in the United States on October 18, 2022
So obviously if you're buying this, you'd doing so with cost as a consideration. Given that, it's perhaps not surprising that there are compromises. I went into it with eyes open, knowing that this would likely be the case. However, given the fact that this is clearly a standard import item branded many different ways, I thought maybe I'd get lucky.Nope. The adapter ring that fits over the bearing collar is not even close to the right size. You absolutely cannot install this item without the correctly sized collar - it's what attaches the motor to the mill. I'm not sure what mill the ring is sized for, but clearly it's not a 1978 Series 1, and I doubt it fits any other Series 1 either.My plan is to make a replacement. Even ordering material from McMaster Carr ($$) I don't think it's going to cost more than $50 to make one, and it'll be less if I can source plate elsewhere. I mean, I have a mill and a lathe, and it's just a piece of steel with some holes in it. I don't think much precision is required, either. If it installs correctly with just this one hiccup I'll count it good enough. I'll try to remember to update this review if it's otherwise.I rate the item two stars because there's basically no reason for them to be at all unclear about what mills this item fits or doesn't fit. But not one star because I don't think I can in honesty say I was that surprised, and if I can get it working just needing to fabricate the one part, well, that's not too bad for the price and effort.
Joe B.
Reviewed in the United States on October 12, 2022
Dont buy this one unless you have a machine shop to modify everything. Virtually none of the pieces work. The bevel gear did not fit on the extension shaft so I had to turn the shaft down on a lathe. The mounting block was not the correct diameter so I had to make a new one. This is just a collection of parts that can be modified to resemble a power feed. Shoddy workmanship and not even close to fitting a Bridgeport series 2 mill. Lots of work went into getting this stuff to work properly. What I saved in cash cost me in time.
Recommended Products
$119.98
$ 49 .99 $49.99