Your cart is empty.
Your cart is empty.Product Description
AirbnbFotograf.de
Reviewed in the United States on February 24, 2025
the holding tool is helpful but the whole process putting the tube on is nightmare.. Tested the tube before putting on but when I spend 1 hour put the tire back, the process is nightmare the tube must got punctured because zero air going in !
Jon E.
Reviewed in the United States on January 27, 2025
Extra thick rubber so you wont get your rubber pinched
Cindy
Reviewed in the United States on September 21, 2024
I've been using these inner tubes for about 3 years and don't use any other. There good quality thicker inner tubes and last a long time. Plus the seller was "on it", i ordered Thurs and got them Friday. Try these out, there awesome.
Paul C
Reviewed in the United States on June 20, 2024
The valve extension is the perfect addition to the purchase. The tire is a little bit of a pain to reinstall, but it is not the tube that makes it difficult. I would recommend a set bike tire levers. The tubes are thicker than the originals.
8bitmuch
Reviewed in the United States on March 4, 2024
Seems a little small, I was unable to get it on the rim without pinching the tube between the rim, even filling it up a little. I want to take stars off for this, but the valve extension caps and valve extender that keeps pressure are nice.I was going to return them, but I'll keep them just because it came with a pressure keeper valve extension, and metal caps that look really nice. I actually damaged a valve hitting a curb, and I think metal caps would've saved it.The tubes are nice and thick and the shraeder valves are very high quality. I'm going with a different brand that has a longer bent valve which is easier to install.I would give these tubes another chance, but I'm only using tubes until I go tubeless, so I'm going with a different brand that's easier to install and sits in the tire better. I'm also going to upgrade to 10 inch tires, which are safer and easier to install tubes anyway.
Manu
Reviewed in Saudi Arabia on March 4, 2024
Large size to my scooty
Alejandro
Reviewed in the United States on November 3, 2024
Bought these for my sons razor scooter. Great price compared to what was listed in their website. Held air for the summer and still holding.
Dee Gee
Reviewed in Canada on August 9, 2023
Advice to buy tires with no tubes! Run flats the way to go electric scooters
Aidan
Reviewed in Canada on December 11, 2023
Works fine, not worth the hassle of trying to put on yourself
Meshal Ben Saoub
Reviewed in Saudi Arabia on August 28, 2022
جميل
DanS
Reviewed in the United States on June 19, 2019
Quality seems good and the brass valve stem seems durable. Wish it came pre-dusted with chalk/starch, but that is easily remedied. Word of warning, though - you WILL need some tire irons to install this thing. It is incredibly difficult to work on a tire of such a small diameter. I do a lot of bicycle maintenance and I have a few suggestions:1) Get some tire irons - these are good ( https://www.amazon.com/gp/product/B00NU928OO ) You will absolutely need them.2) Dust the tube with some sort of starch before installing (corn, tapioca, etc.). This reduces the friction between the tube and tire during inflation and will result in a better fit and longevity of the tube.3) Be sure to position the valve stem so that it is not angled forward or backward. If it is, there will be lots of pressure on the junction of brass stem to rubber tube when inflated, to the point that it may develop a leak. Do this before you work the tire back on to the rim.4) To help with the stem not pulling out during tire installation, thread the stem through the wheel and screw the valve cover on. This will help to keep it in place.5) To get the tire back on, slip the bead of the tire into the center groove of the rim on one edge - this will give you more bead to work with on the opposite end when working it over the edge of the rim. This is technique is also useful when removing the tire. You may need to re-position the bead into the wheel groove multiple times as it tends to work it's way out easily.6) If working on the rear wheel - be careful not to bend the brake rotor as you will tend to use the floor to steady things while re-installing the tire.7) Re-install the tire from the non-rotor side of the rear wheel. In other words, install the tire bead on the rotor side first (you should not need the tire irons to do this) Then work the bead in from the non-rotor side with the tire irons. This is because the rotor tends to get in the way of the tire irons, making installation even more difficult.8) Finally - be sure to check the pressure periodically. It should be at 50 PSI to help prevent pinch-flats on sharp street edges or cracks.Good luck!
Andrew Young
Reviewed in the United States on March 7, 2019
I haven't yet installed either of these, but on visual and tactile inspection, they seem to be of similar quality, and about as thick as the factory Xiaomi M365 tubes. I wouldn't go so far as to say "thickened" is inaccurate, as the Xiaomi tubes are also significantly thicker than other scooter tubes I've used.The valves work, and have removable cores but I would clean the insides of the valves a little and maybe apply some sealant to the threads for maximum reliability.
Recommended Products