Your cart is empty.
Your cart is empty.Product Description
Made for SmartThings and Aeotec Smart Home Hub
Works with SmartThings Hub. Connects to Aeotec Smart Home Hub. Works via Zigbee.
Monitor your home and with Aeotec Motion Sensor, previously known as the SmartThings Motion Sensor. Receive 24/7 alerts on your smartphone anytime there’s unexpected movement in your home. Let the motion sensor turn things off for you by setting devices to automatically turn on or off as you come and go. It even monitors the temperature. Requires an Aeotec Smart Home Hub or compatible device with SmartThings Hub functionality and SmartThings App. Includes: battery, magnetic ball, wall-mounting pads, quick-start guide, and health and safety guide. Technical Details: Power: 1 x CR2 battery Communication Protocol: ZigBee Range: 50-130 feet, depending on your home’s construction Operating Temperature: 32 to 104°F Intended for indoor use only compatible with previous versions of SmartThings Hubs, including F-HUB-US-2, F-H-ETH-001, ET-WV520KWEGUS, ET-WV520BWEGUS, ET-WV530BWEGUS, and F-USB-US-M-1 Material - Plastic.
Motion Sensor is part of Aeotec's range of SmartThings product which includes;
Mark S.
Reviewed in the United States on March 7, 2025
I have a bunch of these that I bought under the Samsung brand some years ago. This one is identical to the others. I've never had an issue with any of them. Motion detection speed and response time is excellent. I was concerned about which type of battery this one needed as the description mentions both a CR2 and a CR123. I was relieved when I opened this one up that the correct battery is a CR2, which saved me from having to stock another type of battery!
Eric
Reviewed in the United States on January 20, 2025
I'm using this with a closet light where the wall switch gets inevitably blocked behind some clothes and is mildly troublesome to switch on and off. Now, it is set to come on when motion in the closet is detected and stays on for a few minutes then goes off. Setup was as easy as it gets thru Smartthings and from motion detection to light on, the time is milliseconds. Smartthings shows motion state and temp. Very happy with it so far and highly recommend.
brocinco
Reviewed in the United States on January 11, 2025
I have tried other sensor for smartthings, even the aeotec trisensor, and this is the only one that works. a must for smartthings!
Rob L.
Reviewed in the United States on September 15, 2024
I use this motion sensor in an Alexa smart home system to turn some lighting on and off in a room we use for storage in our apartment. This is very convenient since the light switch for the room is behind one of the double glass doors one would open to enter the room. We have several Echo 4th gens in the home so this motion sensor was immediately found by Alexa and was extremely easy to set up and use in routines. It has been 100% reliable and I couldn't be happier with it. UPDATE 12/23/2024: The first one was working so well, I purchased a second motion detector to perform the same function in another room. These are SO handy!
Customer
Reviewed in the United States on June 12, 2024
I bought this to a replace a broken motion sensor that was discontinued. Works well with our smart home system. Pretty easy to configure and set up a routine (ours uses motion to turn on lights and lack of motion to turn them off).
WhyteNoyse
Reviewed in the United States on June 1, 2024
good sensor even has a temperature sensor inside. Battery life might be a thing, but works well for my use case.
Matt
Reviewed in the United States on December 25, 2024
The Aeotec SmartThings Motion Sensor works seamlessly with Zigbee2MQTT and Home Assistant. It’s fast to respond and includes a temperature reading, which is a nice extra feature.However, as a new device, the battery seems to be draining faster than expected, so I can’t fully gauge its long-term battery life yet. It would also be nice if there were an easy way to adjust the dwell time. Overall, it’s a responsive and capable sensor, but the battery drain is something to watch.
Lenin G.
Reviewed in Mexico on May 3, 2023
Sin problemas en su conectividad con el Smart Home Hub Aeotec ...
Justin
Reviewed in the United States on September 12, 2022
Aeotec is becoming my go-to for Smartthings integrations. You can do much more when a product is Smartthings capable than just Google and Alexa. So many ways to automate the motion to a light switch.I have them connected to multiple lights like the bathroom so during the day when you walk in it cuts on, at 12 am or 2 am when you walk in it cuts the bathroom lights on to 15% so you're not blinded by the lights going to 100%To solve the problem when your in the shower and it cuts off when it doesn't see motion before you set this routine up, see what the temp is before the shower is on and when the shower is running check the temp then create a routine in smartthings that when the light is on AND the temperature is above a certain temp, make the light stay on =)If the battery is at 5% or lower it will also send a notification to everyone's connected phone. If they could come up with a better price, they could be the go-to for home automation.
Guilherme
Reviewed in Mexico on January 4, 2022
El sensor funciona perfectamente pero tal cual se informa en la descripción, se necesita un Hub. Pero no es necesario que sea un Hub Smarthings, lo uso con un Hub muchísimo más barato y funciona de maravilla.
Recommended Products