Your cart is empty.
Your cart is empty.This product has sensor performance specifications with accuracy of more than 2 degree centigrade / 3.6 degree Fahrenheit and operating temperature of - 40 Celsius to 200 Celsius / -40 Fahrenheit to 392 Fahrenheit. The dissipation constant is 12 megawatt per degree centigrade and the ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the Thermistor. The test medium is silicone oil and thermal time constant is 10 sec. The time required for the sensor to achieve 63.2 per cent of its steady state value when subjected to a step change in ambient temperature [Tc= (Tf-Ti) x63.2%+Ti]. Sensor body material used is brass, thread: 1/8 inches -27 PTF, hex size is 1/2 inches, installation torque: 13.5Nm / 10 feet-pounds, weight of 12.2 grams, supply current: 5 Volt DC, electric termination: connector includes mating connector, pins and pin lock.
Kevin S.
Reviewed in the United States on January 19, 2025
Broke my old sensor and this works perfect!
D
Reviewed in the United States on February 1, 2024
My Blue Supra is not my daily so it doesn't get driven but only a handful of times a year. I feel the sensor should have lasted longer than it did..(used for coolant temp)
Jon Burnstad
Reviewed in Canada on September 9, 2023
Calibrated based upon aem 30-2012. At ambient temp it is 20deg c lower then all other temp sensors in the engine bay. For the price do not buy it.
Adam
Reviewed in the United States on November 25, 2023
Did not come with electrical pins shown in the bottom left of the picture
jigga009
Reviewed in Canada on August 1, 2018
Works as advertised.
Boostedforever
Reviewed in the United States on May 20, 2017
AEM is the only brand to have this much quality.
Brent
Reviewed in the United States on June 17, 2015
Works with TunerStudio / MegaSquirt, as an oil temperature sensor IF you have the correct files. I have worked out the files with the TunerStudio folks in this thread:http://www.msextra.com/forums/viewtopic.php?f=122&t=58859The sensor seems well built and I have not had any trouble with it. I used it to measure the oil temperature in an aircooled VW bug, after making a custom fitting.
xMishka
Reviewed in the United States on February 27, 2015
It has a datasheet so it's nice an easy to use/map anywhere. Good quality product. Temp/resistance values have a slight curve. Check out the data sheet to make sure it works for you.
Lutorm
Reviewed in the United States on November 6, 2015
Kind of expensive, but if you need a 1/8" NPT 2-wire temperature probe, then this was pretty much the only one I could find. I haven't tested the calibration, but it's accurate at ambient temp and is at least not wildly inaccurate at 100C.
R. Lee
Reviewed in the United States on November 5, 2015
Great product, comes with 3 crimp connectors and a new connector. Price is high for just the sensor and connector.
Recommended Products
