Your cart is empty.
Your cart is empty.4.3 out of 5 stars
- #86,749 in Sports & Outdoors (See Top 100 in Sports & Outdoors)
- #132 in Indoor Bike Storage
Enhance your bike storage experience with our Adjustable Bike Floor Stand
Alkaline Macaw
Reviewed in the United States on June 8, 2025
This is a nice little stand that has pleasantly surprised me over a couple of months. Assembly requires a bit of patience and far more screws than I would have expected but once together and adjusted for my tire width it's been solid and convenient place to park a bike while adjusting bars, saddles, and controls or just to check tire pressure and lube the chain before a ride.It's good if your bikes all have roughly similar tire widths. If you have road, gravel, and/or mountain bikes in the same household Feedback Sports' Rakk is probably worth the extra $10-12 as it accommodates most tire sizes and folds flat when not in use. But if those aren't concerns I wouldn't worry too much about saving the tenner.
Candey Plante
Reviewed in the United States on June 29, 2025
Instructions didn’t match the pieces, but I made it work. Kinda tippy. Probably perfect for kids bikes, but I’m not sure it’s going to keep my adult beach cruiser bike upright in a gust.
Finest City Resident
Reviewed in the United States on May 4, 2025
I bought this item so I would have a stand to hold my bike after my long endurance rides...when I am tired and just want to set the bike down. No desire to put my bikes on the ground, and too tired to pull out the work stand.I found this stand to be perfect for holding my post ride bikes but also for doing my post ride bike maintenance, e.g., chain clean and lube, wipe off the mud, check tire pressures and most important, keep my bike off the ground.The stand fits my 29" MTB XC, 29" MTB DH, 29" MTB E-Bike, and 700CC road tires and wheels.The stand is super easy to adjust.HINT: When setting the width to fit your bike, first make sure you don't make it too tight otherwise the bike stand wants to come along for the ride (won't let go of the tire). Second, make sure once you slide the sides of the stand to the desired width, you tighten the flip screw (very easy to do) nice and tight. This will prevent a leaning bike from pushing the sides apart and allowing your bike to fall over.PROs:Stable bike standQuality of material and manufactured piecesFits all your bikesNot so big it takes up a lot of roomCONs: More of a note; when assembling, the pads on the bottom are already installed. Actually, a good thing but I always expect the instructions to be perfect.Recommendation: I love it and highly recommend it.
Eric H.
Reviewed in the United States on May 28, 2025
Good gear.. not bad for the price.
Justin O
Reviewed in the United States on May 2, 2025
I ordered this because I have one bike where the tire is just a little too wide for my existing stands. This stand is adjustable to a very large range of tire sizes once assembled.Assembly takes a bit, but isn’t too difficult. The instructions are mostly clear, but when putting together the main legs the initial screws go through the holes that are spaced out. There are two sets of very closely set screws which you do last when fixing the main legs to the adjustable spacers. Attaching those last pieces does require some effort, but I was done within fifteen minutes.The stand feels very sturdy and the adjustable spacing locks into place securely so you don't need to worry about the adjustment slipping. The bottom feet also have some grippy plastic so the unit itself stays in place even when putting a bike on it.This is a great bike stand and more versatile than ones that can't be adjusted. Especially if you might have different bikes with different tire sizes this is a pretty useful stand.
Brett Johnson
Reviewed in the United States on May 2, 2025
This bike stand works so much better than the previous one I had for my 52lb eMTB. I love that it's width-adjustable, which is the main reason it works so well. It works best when adjusted so the tire rubs/sticks just a little bit when rolling in/out. Note that it won't hold the bike up if it's leaning or not balanced, it's not that strong. I also really like that it's plastic with stainless screws, which means it's fine to get it wet, and I can use it to give my bike a bath, which is a solid point in favor of this model vs the similar, but much more expensive rockbros plywood stand. One thing I thought was odd is that each side is made of 2 pieces held together with 4 screws. They come snapped together in the box, but missing the screws. I can't imagine why they don't just assemble them at the factory, but it wasn't a big deal, just kinda strange. Overall, I'm very happy with this stand.
A Ford
Reviewed in the United States on May 11, 2025
This is hands down, the most complex bike wheel holder Ive ever assembled. That being said, it's all plastic with decent hardware, so it should keep bikes standing, for a long time. The adjustability means you can park anything from a roadie, gravel, XC, Trail, Enduro, DH and even a fat tire bike, with ease (maybe even a Penny-farthing but I don't own one to test) . This functionality is nice, when you own more than one type of bike. The two adjustable levers remind you of the quick connect axles found on bikes. Adjusting their firmness is exactly that same way. The assembly came well boxed and all parts and tools to assemble were included. Instructions were quite good. Ive included a few photos, to help others where it maybe a little confusing. We adjusted the rack, to fit my wife's Liv trail bike and it was super easy. Bike sat in it and never felt like it was going to fall out. Its plastic construction has made this my principal bike older during post riding cleaning sessions. Great price for such a wide ranging bike stand. Sizing is typical for these types of stands.
Recommended Products
$34.29
$ 16 .99 $16.99