Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools - CAT40 1'' End Mill Holder with 3'' Indexable Face Milling Cutter, 7-Pc APKT1604 Carbide Inserts Installed, 7104-4518
- All ''V'' Flange Tooling is interchangeable with brown & sharp, Burgmaster, Carboloy, Cincinnati Milacron, De Vlieg, Erickson, Excello, Moog, Pratt & Whitney, Universal, Valenite, White Sundstrand and other machining centers.
- 3-inch cutting diameter
- 7 flute indexable face milling cutter
- Coming with 7 pieces of Carbide APKT 1604 Inserts
- 90° cutting angle
- Screw down inserts
- Radial rake angle: -10°
- Axial rake angle: +7°
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
- Fitted with 10° positive rectangular insert allow the high depth of cut and feed per tooth
- Uses APKT / APHW / APKR_APHT / APMT insert (sold separately)
SKU 7104-4518 is combined with two parts.
- 3" indexable face milling cutter
- CAT40 end mill holder.
Both are available separately.
Schema of 3" indexable face milling cutter
Schema of 3" Indexable Face Milling Cutter
Schema of CAT40 End Mill Holder
- All "V" flange tooling are interchangeable with brown & sharp, burgmaster, carboloy, cincinnati milacron, de vlieg, erickson, excelled, mooggy, print & whiney, universal, valence, white sand strand and other machining centers.
- Made from alloy steel hardened to HRC 52-56
- Taper accurately ground exceeding AT3 standard
- D: 1''
- L: 2-1/16''
- L1: 5-7/16''
- A:11/16''
- B: 2-11/64''
- Draw bar thread: CAT40 5/8"-11
- SKU: 6780-7104
3" Indexable Face Milling Cutter
Specifications
- 90° Cutting angle
- Screw down insert
- Radial rake angle: -10°
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
- Fitted with a 10° positive rectangular insert allow the high depth of cut and feed per tooth
- Uses APKT / APHW / APKR_APHT / APMT insert (sold separately)
- Cutting Diameter (D): 3"
- Arbor Hole (d): 1"
- Overall Length (L): 2.00"
- ap: 0.551
- No. of Inserts: 7
- Screw: M4 x 8.4
- Inserts: APKT 1604
- SKU: 4508-0018
Theman & GF
Reviewed in Canada on August 19, 2024
Holding it and looking at it, I’m very happy with it. I haven’t yet had a need to cut anything with it, and will try to update the review after some chips have flown. It comes with the 5 inserts, and they will sell you more in . At the time of the review a 10 pack of any style was $80. Having said this, they use the same inserts that my brother uses where he works, so I feel they must be a generic insert.If it cuts true, it seems like a great deal.
pk
Reviewed in Canada on February 6, 2024
bought this to try out on a job that was a tool destroyer. stood up well . all the inserts completed the job with no chipping. i would buy again.
Richard N.
Reviewed in Canada on October 11, 2024
I was disappointed these do not fit to the standard FMB22 BT30 shank, or FMB22 series. These facemill are produced from the same country in asia, was expecting size to be standard.
Randal B.
Reviewed in the United States on June 4, 2023
The insert heights on this vary a 5 thou. When cutting at a feed speed a 7 insert face mill deserves you get a seriously poor checkerboard finish compared to a 5 insert kennametal shell mill.
chadjensen
Reviewed in the United States on November 23, 2023
The description says the ''V'' Flange Tooling fits Erikson. It doesn't as my chuck is an Erikson. I don't know how it cuts because I can't mount it in my mill. Quality seems good so I gave it an extra star, but it only gets 2 stars because it was more presented in the description.
Customer
Reviewed in the United States on January 11, 2023
This cutter is well made and versatile, it is as good as the name brands at up to 4x the price. It can use the high shear positive on Alum., Copper etc. (non ferrous) and the also steel cutting grades and geometry as well.I seriously recommend it.
Tandy Norris
Reviewed in the United States on January 9, 2021
I works but the surface isn't that great. Ether the carbide teeth are crap or the holder is off.
tradin1
Reviewed in the United States on January 1, 2021
These tools never disappoint. Why pay more for the same quality. At least twice I have broken an insert, because I was not paying attention, and after a phone call to accusize in CA they immediately sent out the replacement parts. They care about their customers like no American company ever has. I strongly recommend accusize tools.
Matthew S.
Reviewed in the United States on August 11, 2020
Works excellently. Find myself using it all the time. Wish it performed a bit better on plastics or left a better finish on aluminum in heavy cuts.
cooper kelly
Reviewed in Canada on March 8, 2020
Has no problem cutting 1.5" flame cut plate at .600 DOC.Inserts for this cutter are readily available in all industrial tooling stores near me! Very impressed with build quality at this price 👍
Bala Vanumamalai
Reviewed in Canada on January 25, 2020
Very good product and delivered on time.!
chucksterock
Reviewed in the United States on May 22, 2017
Very pleased with the tool and its arbor though the washer necessary to secure the tool to the tool to the arbor was not included. Clamping fastener was there on the arbor but no washer or something fancier. FYI it's a 3/4" washer. Very pleased with the cutting action of the tool once I got it mounted.
Rich C
Reviewed in the United States on December 6, 2016
This 2" face mill works great and the price is good. I did find that the counter bore for the attaching bolt to be too small for the bolt that came with the arbor. A standard socket head cap screw does the job.
Recommended Products
$102.82
$ 47 .99 $47.99
$65.95
$ 28 .99 $28.99
$133.56
$ 61 .99 $61.99
$157.94
$ 68 .99 $68.99