Your cart is empty.
Your cart is empty.Product Description
0-6inch
Precision Dial Caliper, Stainless Steel, Deluxe Case
Specifications
- Range: 0-6''
- Resolution: 0.001''
- 0.100" single revolution
- Accurate to .001'' per 6''
- Direct reading to .001'' in large clear dial/.-100
Features
- Hardened stainless steel
- Measuring face hardened, precision ground and micro-lapped for absolute accuracy
Features
- Adjusting slide for fine adjustment
- Satin chrome finish, crisp engraved graduations
- Clamp for repetitive setting
- Accurate to .001'' per 6''
- Covered rack
Features
- Inside, outside, and depth measurements
Frank
Reviewed in Canada on March 1, 2025
Works well.
A. Burnett
Reviewed in the United States on February 21, 2025
I had an almost identical pair of calipers for 20+ years. Then my grandson dunked them in his milk one day, they got gunked up and never worked right again. (You can't make stuff like this up... yes, it really happened,) Bought this pair as a replacement; completely satisfied. I am only a hobbyist, so they are adequate for my needs. I can not imagine going back to trying to take inadequate measurement with a ruler... now I can get exact measurements to the thousandths of an inch ! Love it.
Scottie
Reviewed in Canada on September 20, 2024
I just got this yesterday and havent really had a chance to put it to work, but it seems better then the last tool i bought from these people.
Zoom
Reviewed in Canada on December 24, 2024
Excellent quality and accurate.
Joe
Reviewed in the United States on July 21, 2023
These are perfectly fine for the money.
Kent
Reviewed in the United States on January 21, 2023
It has been holding up and measuring as expected. Great purchase.
mepha
Reviewed in the United States on January 18, 2023
Good luck finding a better one for the money. This is not a $150.00 caliper. This is a nice inexpensive dial caliper. I have seen these calipers used in really good Canadian Luthier Youtube channel. Making and repairing very nice stringed instruments. Checking the string gauge od, saddle height, ect.
Russell F.
Reviewed in the United States on July 27, 2022
I dont need a certified PMEL type caliper so this one is really nice for the more general work application. Im retired.I think if you are in aviation or a career where it needs pmel certification it would be quality enough to work with that too. (I'm FAA "A and P" certified myself. Nice caliper at reasonable price.
Herman Hong
Reviewed in the United States on March 15, 2022
The last time I had a "non-digital" measuring device, was probably a ruler and a measuring tape, but for some precision measurements, it's been all digital but I've now gone through 3 digital calipers, two due to liquid spill and the 3rd measures but blinks! I decide on a manual caliper and most of my work only requires 1/1000" precision. After opening up the box, I cleaned up the caliper with alcohol; guessing this is anti-oxidization type light oil it seems. Then I zero'd the dial and that 's it. It measures fine as expected... and finally, no batteries!
eimb1999
Reviewed in Canada on December 22, 2022
Quality is excellent for the price. If you need a dial caliper at a low price this works just fine. It may not stand up to the daily use of a professional machinist but for the occasional use for the hobbyist, it's perfect. I recommend this over electronic ones. It requires learning how to read it (easy, really) but electronic ones eat batteries. If you do not abuse this analog instrument it will last you a lifetime. Comes with a good protective case.
raunchy hobbit
Reviewed in Canada on January 18, 2021
Very nice quality, easy to use and read. Originally was going to buy digital but don't like paying for expensive watch batteries, also anally is simpler and less prone to problems. Recommend as a good quality tool that is not too expensive.
Jackbooted thug
Reviewed in the United States on April 30, 2020
I've had this tool for about 8 months now and it has proven to be a decent caliper. It's not a Starrett or Mitutoyo but it's also not $150+.It has performed well and gives repeatable readings. For a basic dial caliper this unit will fill the need. For the money, you probably can't do any better. In fact, its reasonable cost makes it an excellent everyday tool that you will not worry about. Accusize Tools is a Canadian company but I'm certain these calipers are sourced from Asia. The caliper is not marked with the country of origin but they are good quality so that's a non-issue.So, if you need a good basic caliper for everyday use - these will fill that need nicely.
AgentOrange
Reviewed in the United States on February 20, 2019
This is worth 100% worth the price. The case could be better, I don't like the way it opens. The cutout for the dial caliper is hard foam pad, which I like, with a soft foam pad in the lid, which could be better quality. The thumb wheel rattles around a little, but it functions perfectly without slipping, jerking, or feeling notchy. The dial has a clear plastic for protection that has some air bubbles in it, but that could be removed if you wanted, it doesn't make it hard to read. In fact the numbers are very easy to read, nice and clear. It's hardened stainless steel so it has some weight. It's well machined surfaces from start to finish, the slide is tight and smooth, it locks with little effort, the dial has a very nice grip for easy adjustments, if needed, mine was dead on out of the box. I'm just not sure you can ask for a better tool for this price. I'm very happy with this purchase, it has it were it counts, and arrived quickly.
Recommended Products
$138.39
$ 54 .99 $54.99
$14.99
$ 6 .99 $6.99
$161.88
$ 70 .99 $70.99