Your cart is empty.
Your cart is empty.Product Description
Features: High rigidity and impact strength. / Excellent electrical properties, moisture, and creep resistance. / ABS has good chemical and stress-cracking resistance to inorganic salt solutions. / Easily machined to close tolerances, is tough, dimensionally stable, and maybe thermoformed.
ABS Thermoplastic Sheet
Black moldable ABS sheets 8x12 inches, 12x16 inches, and 18x24 inches are available to support your different needs. The 1/16 inch, 1/8 inch, and 1/4 inch thick rigid thermoplastic panels can be used for most craft projects.
ABS Application
Dashboard Surface
Knife Sheath
Amp Audio Surface
Display Sign
David Eiker
Reviewed in the United States on February 5, 2025
Bought plastic to make custom mounting o rings for landscaping lights. Worked great
David Eiker
Reviewed in the United States on February 5, 2025
Bought plastic to make custom mounting o rings for landscaping lights. Worked great
Marco Ramos
Reviewed in the United States on February 24, 2025
This is the perfect material for shims to improve the fit and stability of squat rack attachments. For instance, my dip attachment would wobble side to side until I shimmed it with a single sheet of this ABS to get a rock-solid fit: cut and drilled a piece of the ABS using the UHDPE liner as a template, then screwed on the resulting shim behind the UHDPE. The same strategy fixes to loose fitting j-cups. It’s easy to cut with a utility knife, and easy to drill with wood bits.
Marco Ramos
Reviewed in the United States on February 24, 2025
This is the perfect material for shims to improve the fit and stability of squat rack attachments. For instance, my dip attachment would wobble side to side until I shimmed it with a single sheet of this ABS to get a rock-solid fit: cut and drilled a piece of the ABS using the UHDPE liner as a template, then screwed on the resulting shim behind the UHDPE. The same strategy fixes to loose fitting j-cups. It’s easy to cut with a utility knife, and easy to drill with wood bits.
Sniper1500m
Reviewed in the United States on January 30, 2025
Exactly as promised.
Sniper1500m
Reviewed in the United States on January 30, 2025
Exactly as promised.
5string
Reviewed in the United States on January 19, 2025
Used these to cut crawl space vent covers. Put a dab of silicone near each corner to hold them in. Slice the dabs in the spring to remove them and repeat in the fall.
5string
Reviewed in the United States on January 19, 2025
Used these to cut crawl space vent covers. Put a dab of silicone near each corner to hold them in. Slice the dabs in the spring to remove them and repeat in the fall.
RebaJ
Reviewed in the United States on January 16, 2025
This worked perfectly for giving my crochet bag structure on the bottom. Very sturdy, easy to cut with a utility blade (you will need a cutting board)
RebaJ
Reviewed in the United States on January 16, 2025
This worked perfectly for giving my crochet bag structure on the bottom. Very sturdy, easy to cut with a utility blade (you will need a cutting board)
Becky Stewart
Reviewed in the United States on November 5, 2024
Product was described accurately so it fit my needs well. Cuts easily and is a good quality.
Becky Stewart
Reviewed in the United States on November 5, 2024
Product was described accurately so it fit my needs well. Cuts easily and is a good quality.
PJ
Reviewed in the United States on November 3, 2024
It arrived undamaged used on kayak for keel guard. No problems using with heat gun.
PJ
Reviewed in the United States on November 3, 2024
It arrived undamaged used on kayak for keel guard. No problems using with heat gun.
Dan
Reviewed in the United States on December 15, 2023
Ordered this ABS with the plan to cut it into 2” strips. Using my table top hot wire trimmer, I set the guide for 2” with the heat to max VERY SLOWLY!! With a little practice the hot wire moved through the plastic cleanly. When finished it was simple to snap the 2” strip off with a clean cut edge.Be cautious of the fumes if you plan to use this method frequently.Note: This worked well for 1/16” ABS. I have no experience with thicker material. The key to success was moving at the rate the wire melted the plastic.I had tried other options such as a razor knife, and paper trimmer to cut the ABS. Neither of these options produced the clean straight edge my project required.👍👍👍👍👍 5 thumbs up from me!
Dan
Reviewed in the United States on December 15, 2023
Ordered this ABS with the plan to cut it into 2” strips. Using my table top hot wire trimmer, I set the guide for 2” with the heat to max VERY SLOWLY!! With a little practice the hot wire moved through the plastic cleanly. When finished it was simple to snap the 2” strip off with a clean cut edge.Be cautious of the fumes if you plan to use this method frequently.Note: This worked well for 1/16” ABS. I have no experience with thicker material. The key to success was moving at the rate the wire melted the plastic.I had tried other options such as a razor knife, and paper trimmer to cut the ABS. Neither of these options produced the clean straight edge my project required.👍👍👍👍👍 5 thumbs up from me!
Recommended Products