Your cart is empty.
Your cart is empty.Product Description
36PCS HIGH QUALITY 3030 CHIPS
FOUR LAYER COOLING DESIGN
Quadruple-layer thermal design - 12,000RPM silent fan + aluminium heatsink ring + 9 heatsinks + 6063 aerospace aluminium directly quadruples heat dissipation to ensure optimal performance even in the hot sun, with a lifespan of up to 50,000 hours.
Note:
1.If you have halogen bulb, you can refer to methods 1, 2 and 3 to find the correct part number you need.
2.If you have after market light, bulb fitment guide may not accurate, you can refer the method 3 to find out the correct part number you need.
3.The "Note/!" is very important, it will tell you the applicable positions. For example, "Note: Fit for Brake/Signal/Tail light.", it means the led bulbs only fit for these lights, if you want a reverse light, the bulbs won't fit.
4.If you have any questions or encounter any problems with your order, please let us know or ask in the “Customer Q&A”.
Roonster
Reviewed in the United States on February 12, 2025
i purchased new headlights for my car, and they came with led lights when the car should have halogen , i either needed to mess around with adding a resistor or buy a built in CANBUS bulb. and it worked great! super bright and easy to install. and cheap too! i would definitely recommend. it stopped the fast flickering on my car!
JW
Reviewed in the United States on January 12, 2025
2006-2009 4runner signal light tested well.
Average audiophile
Reviewed in the United States on September 20, 2024
The bulb on the right is the new turn signal LED. These alone seem to help prevent hyper flash however, when I installed another brands turn signal LED light on the front which was also supposed to prevent hyper flash, I then got hyper flash. 🤷🏻♂️ Overall these are brighter and work as advertised when you use an incandescent on the front on my vehicle anyway and I hope they last.
MacVet
Reviewed in the United States on September 19, 2024
These LEDs are compatible with my 2014 Jeep Grand Cherokee front turn signals and fit the OEM wire harness and are not too long for the light housing. They are a bit longer than the OEM amber bulbs, but still mounted fine. Best of all, they eliminated the hyper flash and "turn signal out" error codes appearing on my dash. So far, so good!
Kevin Malley
Reviewed in Canada on May 15, 2024
These are brighter than any other 1156 or 1157 bulb I have ever used. With that added brightness does come some heat and a fair bit of it's not long before you can not touch any part of this bulb. This bulb is longer than any other incandescent or LED 1156 bulb I have used so be mindful of how much space is available between the end of the bulb and the lens, you don't want the 2 to touch and ideally you want to maintain some good space so heat can dissipate from the end of the bulb effectively.I wouldn't call this fan super quiet but it's definitely not so load that it is a bother. You can hear it running if you walk by the light.
Customer
Reviewed in Canada on November 8, 2024
very bright, changed out brake light bulbs in car
Richard
Reviewed in the United States on November 30, 2024
For my 2018 buick encore, this bulb won't fit into the rear turn signal socket, so I had to trim the piece of plastic circled in red off for both sides. Afterwards it fit in without any problem.Overall it has been working good, no hyper-flashing or dash warnings, and it's bright, hope it lasts long tho.
Faron Meeks
Reviewed in the United States on November 27, 2024
These are really bright but they do not have the resistor built in, if they do it's not strong enough. These started hyper flashing the second I put on the turn signal.
Buddy
Reviewed in the United States on November 24, 2024
As with all LED bulbs the talk test will be in its longevity but as it’s only on when blinking turn signal and it has a built in fan I think it has a good chance at surviving the test of time. Will update if there is any quality issues over time. I tried two other more expensive brands before trying these ledyotroy (did I spell it right?) bulbs, one of them caused hyperflash issues and the other did work though only fit in the rear position of my car as they were too long, additionally they did not have a built in fan. These bulbs were my third choice probably because I can’t pronounce the brand name, however these satisfied all my needs. They fit in both front and rear positions in my 2005 Lexus ES330, have a built in resistor so they don’t hyperflash, have a fan to cool the resistors which produce heat as a byproduct, and are not cheap but competitively priced. As long as they last this is a good product.
gy
Reviewed in the United States on October 24, 2024
The listing said that these were a 1:1 fitment to replace the halogen bulbs, and yes they are a good fitment in terms of the bulb length, but the prong connection side of the bulb was a little too big. The plastic bumps to click into the bulb sockets were a little too big and the sides were a little too big, so I had to slightly break my socket for these to fit (just the sides of the socket). They do end up fitting in with the side plastic broken in my socket, but at least they click in and work great. These are really bright and a huge upgrade over the OEM halogen bulbs. I can actually see the turn signal in daylight unlike before. For $18 (with the 10% off coupon), these are probably the best value LEDs you can get for turn signals with an active cooling fan and CANBUS compatibility. Speaking about that, these do prevent hyperflash and work just like normal.
David M.
Reviewed in Canada on April 23, 2024
I installed these bulbs in the rear turn signals of a 2014 Hyundai Accent. I was very surprized for four reasons mainly, (1) the speed of the flash seems to be the same as the original bulbs, no hyper flash or fast flashing lights, (2) the bulbs are extremely bright with instant light, (3) the amber colour is much better than the stock amber bulbs, (4) no CanBus error codes or dash warning lights. I can't comment on the life span of these bulbs yet, that should take many, many years of use. Now I need another pair for the front of the car because I love them so much. These bulbs are one of those products that truly makes me happy and impressed. The photos are during the daytime and don't really show how bright these bulbs actually are.
W Hum
Reviewed in Canada on April 13, 2024
These LED replacement bulbs a super bright compared to the Halogens but of course I had no doubt they would be at 4000 Lumens. I do find them longer than OEM halogens in my motorhome but I have enough space inside the lens housing for the extra length. I am using them for my Daytime Running Lights that gives the extra brightness I was looking for. The way the motorhome was set up, it used halogen bulbs for DRL's but they were only half power to the bulbs, so they were never bright enough in the rain of fog.Half power on these LED bulbs was 3 times brighter than the OEM halogen bulbs which was what I was hoping for. So for me, it's a perfect setup.
Vine Review
Reviewed in Canada on December 24, 2023
I recently upgraded my car's front turn signals with these LEDs, and I must say, they are impressively bright. They even outshine the filament bulbs and are clearly visible during the day. What's great is that there's no hyperflash in my car, indicating the presence of a built-in load resistor.Installation was a breeze – a simple plug-and-play process. I experimented with three different PY21W bulbs, and this one was the only one that worked seamlessly. The built-in fan, although I'm not sure of its purpose since I'm using it as a blinker light, adds a thoughtful touch.The stock bulbs had an orange tint, giving that "egg yolk" look. These bulbs, with their silver-greyish hue, offer a more modern appearance, although the exposed yellow LED diodes may be visible in a silver reflector.I've used various super-bright amber LED turn signal bulbs in my vehicles, and while these LEDYOTRY bulbs are now my spares, they impressively fit the 1156 socket with ease.The light output is fantastic. One thing to note is that there's no LED at the top end of the bulb, which may slightly affect the total light output. However, if you're replacing stock halogen bulbs, these LEDs will undoubtedly leave you satisfied. The quality and construction feel robust, featuring a substantial heatsink. Overall, a great upgrade for improved visibility and a modern look.
Recommended Products